• Journal of the Institute of Electronics Engineers of Korea CI
• /
• v.46 no.2
• /
• pp.106-113
• /
• 2009

Recently, due to many industrial accidents at construction sites, a variety of researches for structural health monitoring (SHM) of buildings are progressing. For real site application of SHM, one of the advanced technologies has blown as wireless sensor networks (WSN). In this paper, we proposed WIVA(WSN Monitoring framework based on 3D Visualization and Augmented Reality in Mobile Devices) system that applies 3D visualization and AR technology to mobile devices with camera based on WSN in order to expand the extent of information can observe. Moreover, we performed experiments to validate effectiveness in 3D and AR mode that utilize WSN data based on IEEE 802.15.4. In real implementation scenario, we demonstrated a fire occurrence test in 3-story building miniature.

• Journal of Digital Convergence
• /
• v.11 no.10
• /
• pp.419-429
• /
• 2013

The Wireless sensor network(WSN) consisting of a large number of sensors aims to gather data in a variety of environments. The sensor nodes operate on battery of limited power. so, To extend network life time is major goals of research in the WSN. In this paper, we state the key point of a energy consumption with minimum&load balancing. The proposed protocol guarantee balance of number of cluster member nodes using the node memory threshold and optimization of distribution of cluster head using the optimized clustering method. The results show that the proposed protocol could support the load balancing and high energy efficiency by distributing the clusters with a reasonable number of member nodes. The simulation results show that our schme ensure longer life time in WSN as compare with existing schemes such as LEACH and CBLM.

• Journal of the Korea Society of Computer and Information
• /
• v.25 no.2
• /
• pp.105-111
• /
• 2020

In this paper, we propose a scheme that minimizes the energy imbalance problem of solar-powered wireless sensor network (SP-WSN) using both a mobile sink capable of wireless power transfer and an efficient clustering scheme (including cluster head election). The proposed scheme charges the cluster head using wireless power transfer from a mobile sink and mitigates the energy hotspot of the nodes nearby the head. SP-WSNs can continuously harvest energy, alleviating the energy constraints of battery-based WSN. However, if a fixed sink is used, the energy imbalance problem, which is energy consumption rate of nodes located near the sink is relatively increased, cannot be solved. Thus, recent research approaches the energy imbalance problem by using a mobile sink in SP-WSN. Meanwhile, with the development of wireless power transmission technology, a mobile sink may play a role of energy charging through wireless power transmission as well as data gathering in a WSN. Simulation results demonstrate that increase the amount of collected data by the sink using the proposed scheme.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.22 no.4
• /
• pp.670-675
• /
• 2018

There is a growing interest in EH-WSN (energy-harvesting wireless sensor networks) that can solve power problems in wireless sensor networks. In EH-WSN, on-off duty cycling is being studied in order to balance energy harvesting and consumption. However, the urgency of the sensed data and the energy harvesting rate in the environmental monitoring EH-WSN are important factors to determine the network performance. Therefore, it is necessary to control the duty-cycle period according to the importance of the sensed data and the energy harvesting rate in addition to simply maintaining the balance of the power. In this paper, we analyze the problem of on-off duty cycling in EH-WSN for environmental monitoring and propose an adaptive duty-cycle scheduling scheme considering the priority of sensed data and energy harvesting rate, where the priority of sensed data determined by sensed value and changing rate. The performance of scheduling scheme was analyzed by computer simulations.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.49 no.1
• /
• pp.31-46
• /
• 2012

The most critical technology to implement ubiquitous health care is Ubiquitous Sensor Network (USN) technology which makes use of various sensor technologies, processor integration technology, and wireless network technology-Radio Frequency Identification (RFID) and Wireless Sensor Network (WSN)-to easily gather and monitor actual physical environment information from a remote site. With the feature, the USN technology can make the information technology of the existing virtual space expanded to actual environments. However, although the RFID and the WSN have technical similarities and mutual effects, they have been recognized to be studied separately, and sufficient studies have not been conducted on the technical integration of the RFID and the WSN. Therefore, EPCglobal which realized the issue proposed the EPC Sensor Network to efficiently integrate and interoperate the RFID and WSN technologies based on the international standard EPCglobal network. The proposed EPC Sensor Network technology uses the Complex Event Processing method in the middleware to integrate data occurring through the RFID and the WSN in a single environment and to interoperate the events based on the EPCglobal network. However, as the EPC Sensor Network technology continuously performs its operation even in the case that the minimum conditions are not to be met to find complex events in the middleware, its operation cost rises. Moreover, since the technology is based on the EPCglobal network, it can neither perform its operation only for the sake of sensor data, nor connect or interoperate with each information system in which the most important information in the ubiquitous computing environment is saved. Therefore, to address the problems of the existing system, we proposed the design and implementation of USN integration management system. For this, we first proposed an integration system that manages RFID and WSN data based on Session Initiation Protocol (SIP). Secondly, we defined the minimum conditions of the complex events to detect unnecessary complex events in the middleware, and proposed an algorithm that can extract complex events only when the minimum conditions are to be met. To evaluate the performance of the proposed methods we implemented SIP-based integration management system.

• Journal of Computing Science and Engineering
• /
• v.4 no.1
• /
• pp.23-51
• /
• 2010

Wireless Sensor Networks (WSN) have proved to be useful in applications that involve monitoring of real-time data. There is a wide variety of monitoring applications that can employ Wireless Sensor Network. Characteristics of a WSN, such as topology and scale, depend upon the application, for which it is employed. Security requirements in WSN vary according to the application dependent network characteristics and the characteristics of an application itself. Key management is the most important aspect of security as some other security modules depend on it. We discuss application dependent variations in WSN, corresponding changes in the security requirements of WSN and the applicability of existing key management solutions in each scenario.

• Journal of Digital Contents Society
• /
• v.13 no.1
• /
• pp.129-139
• /
• 2012

Recently, the smart sensor technologies are rapidly developing in accordance with the technology of implementation in small-size, low-cost, and low power consumption. With these sensor technologies, especially with MEMS and NEMS, the researches on the WSN are actively performing. For the WSN, a network security function is essential even it requires high physical resource level. But the WSN with the smart sensor technologies could not be provided with enough resources for the function because of limited size, computing-power, low-power, and etc. In this paper, we introduce security and key-management protocols of WSN.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.5 no.11
• /
• pp.1946-1958
• /
• 2011

Wireless Sensor Network (WSN) is made up of a number of sensor nodes and base stations. Traffic flow in WSN appears self-similar due to its data delivery process, and this impacts queue length greatly and makes queuing delay worse. Active queue management can be designed to improve QoS performance for WSN. In this paper, we propose self-similar traffic rate estimating algorithm named Power-Law Moving Averaging (PLMA) to regulate packet marking probability. This algorithm improves the availability of the rate estimation algorithm under the self-similar traffic condition. Then, we propose an adaptive Proportional Integral algorithm (SSPI) based on the estimation of the Self-Similar traffic rate by PLMA. Simulation results show that SSPI can achieve lower queue length jitter and smaller setting time than PI.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2016.05a
• /
• pp.649-651
• /
• 2016

Wireless Sensor Network(WSN) consists of spatially distributed sensors to monitor physical conditions, such as temperature, light and motion, and to pass their data through the network to a base station. Each battery equipped node is consumed to pass their data to their neighbors. We are gathering the amount of energy that was consumed to gather data and to pass it This paper describes processes of energy consumption of WSN in Matlab.

• Proceedings of the Korean Society of Computer Information Conference
• /
• 2014.01a
• /
• pp.353-354
• /
• 2014

무선 센서 네트워크(WSN)환경에서는 저가의 센서 노드를 구성하기 위해 배터리, 제한된 에너지 등과 같은 하드웨어적인 제약을 갖고 있다. 특히, 센서 노드의 제한된 에너지는 네트워크 수명과 직접적인 관련이 있기 때문에 네트워크의 수명을 연장하기 위한 효율적인 기법들이 요구되는 실정이다. 이를 위해 본 논문에서는 WSN환경에서 고정 노드와 모바일 노드를 혼용하여 음영지역을 최소화할 수 있는 모바일 노드 이동 기법을 제안한다. 이는 대표 노드를 선정하여 네트워크의 밀도를 제어하고 각 노드들의 거리에 따라 신호 세기를 제어한다. 이를 통해 네트워크 지역의 확장과 각 노드의 에너지를 효율적으로 사용할 수 있다.