• Journal of Technologic Dentistry
• /
• v.32 no.3
• /
• pp.221-232
• /
• 2010

Purpose: It is necessary for dental technicians exposed to hazardous chemicals in the dental laboratories to be informed of the various harmful effects of chemicals for their health and safety. The purposes of this study was to investigate the actual condition of the use of MSDS in dental laboratories and the recognition rate of MSDS for dental technicians. Methods: 231 dental technicians who were self-written questionnaire. The results were analyzed by SPSS 12.0. The answers to the questionnaire underwent frequency analysis, chi-square test and correlation analysis were performed to investigate association between health effects and recognition rate of chemical information. Results: The results from the effects of damage caused by chemicals 60.7%, and when it was less than 2 years working experience 47.6%. Currently any dental laboratories(rooms) was not furnished MSDS(0%) and even similar data furnishing rate was only 17.3%. Answer rate of 'Do not know about MSDS' was 73.6%. In addition to, education in the types and characteristics of chemicals(74.5%) does not receive all the higher education. For the question of 'To prevent human risks and accidents, is to provide chemical information needed', the answer rate of 'needed' was 87.2%. Moreover, the answer rate of 'To provide chemical information that could prevent accidents' was 76.6%. Therefore it was found that dental technicians need to be provided for chemical information. In addition, they wanted to get education related to chemicals used in the workplace(80.5%), and 90.9% was answered that they was willing to keep MSDS in they workplace. Conclusion: This study investigated the current dental laboratories(rooms) and the MSDS for the awareness and recognition of workers was very low, education was not being conducted properly. The dental laboratories(rooms) of the compact characteristics of the MSDS was not reasonably accessible and the furnishing location, dental laboratories(rooms) for the real item was needed for improvement. MSDS for dental technicians through education and promotion of information about chemicals and chemicals was to prevent health problems caused by the MSDS that will raise awareness of the necessity.

• Journal of Korean Elementary Science Education
• /
• v.31 no.3
• /
• pp.334-346
• /
• 2012

For teachers' conceptions and understandings are critical to their decision making and classroom practice, this study attempts to understand pre-service elementary teachers' views and practices of science inquiry during peer teaching practice. Fifteen 4th year university students in teacher education program participated in peer teaching practice. Their teaching and reflective discussion were video and audio recorded and written lesson plans were collected for data analysis. Five science teacher educators individually looked into the data and shared their comments and interpretations on pre-service teachers' views and practice. The study findings suggest that pre-service teachers emphasized the importance of providing students with motivating resources in the beginning of lesson, employing certain inquiry teaching models, the process of predicting and dis/proving via experiment, and teachers' minimal intervention as the important features of inquiry teaching. Science teacher educators emphasized that it is critical to help children understand inquiry questions in the beginning of inquiry process, to be mindful of children's problem solving and critical thinking rather than following instruction models or simply going through prediction and test process. They also commented that teachers' guidance could lead a good inquiry process in classroom practice, not always interfering students' inquiry. Based on the findings, the study suggests science teacher educators need to understand what and how pre-service teachers view and practice science inquiry teaching and consider these as useful resources where they can start effective teaching for pre-service teachers at the university level.

• Korean Journal of Construction Engineering and Management
• /
• v.12 no.4
• /
• pp.106-116
• /
• 2011

It is very important to collect and manage labor information in the construction industry that is labor-intensive. Although research and cases that utilize RFID are increasing for more effective labor management, labor management is limited to the checking-in and -out information management at the entrance of a construction site due to high expense of an RFID reader. Labor and safety information is still managed based on the redundant process that is hand-written in a book and re-input of information by using a personnel-computer. Therefore, the objective of this paper is to develop more effective and efficient process for labor information record and management. This paper presents a prototype application that supports integrated labor information management by incorporating QR-code into RFID-based labor management system and verifies the application through a pilot test and comparison with the existing labor management syste.

• Korean Journal of Agricultural and Forest Meteorology
• /
• v.6 no.1
• /
• pp.61-69
• /
• 2004

A long-term growth simulation was performed at 99 land units in Yeoncheon county to test the potential adaptability of each land unit for growing soybean cultivars. The land units for soybean cultivation(CZU), each represented by a geographically referenced land patch, were selected based on land use, soil characteristics, and minimum arable land area. Monthly climatic normals for daily maximum and minimum temperature, precipitation, number of rain days and solar radiation were extracted for each CZU from digital climate models(DCM). The DCM grid cells falling within a same CZU were aggregated to make spatially explicit climatic normals relevant to the CZU. A daily weather dataset for 30 years was randomly generated from the monthly climatic normals of each CZU. Growth and development parameters of CROPGRO-soybean model suitable for 2 domestic soybean cultivars were derived from long-term field observations. Three foreign cultivars with well established parameters were also added to this study, representing maturity groups 3, 4, and 5. Each treatment was simulated with the randomly generated 30 years' daily weather data(from planting to physiological maturity) for 99 land units in Yeoncheon to simulate the growth and yield responses to the inter-annual climate variation. The same model was run with input data from the Crop Experiment Station in Suwon to obtain a 30 year normal performance of each cultivar, which was used as a "reference" for evaluation. Results were analyzed with respect to spatial and temporal variation in yield and maturity, and used to evaluate the suitability of each land unit for growing a specific cultivar. A computer program(MAPSOY) was written to help utilize the results in a decision-making procedure for agrotechnology transfer. transfer.

• Communications for Statistical Applications and Methods
• /
• v.25 no.4
• /
• pp.341-354
• /
• 2018

The one of the principles described in ICH E9 is that only results obtained from pre-specified statistical methods in a protocol are regarded as confirmatory evidence. However, in multi-regional clinical trials, even when results obtained from pre-specified statistical methods in protocol are significant, it does not guarantee that the test treatment is approved by regional regulatory agencies. In other words, there is no so-called global approval, and each regional regulatory agency makes its own decision in the face of the same set of data from a multi-regional clinical trial. Under this situation, there are two natural methods a regional regulatory agency can use to estimate the treatment effect in a particular region. The first method is to use the overall treatment estimate, which is to extrapolate the overall result to the region of interest. The second method is to use regional treatment estimate. If the treatment effect is completely identical across all regions, it is obvious that the overall treatment estimator is more efficient than the regional treatment estimator. However, it is not possible to confirm statistically that the treatment effect is completely identical in all regions. Furthermore, some magnitude of regional differences within the range of clinical relevance may naturally exist for various reasons due to, for instance, intrinsic and extrinsic factors. Nevertheless, if the magnitude of regional differences is relatively small, a conventional method to estimate the treatment effect in the region of interest is to extrapolate the overall result to that region. The purpose of this paper is to investigate the effects produced by this type of extrapolation via estimations, followed by hypothesis testing of the treatment effect in the region of interest. This paper is written from the viewpoint of regional regulatory agencies.

• Journal of Physiology & Pathology in Korean Medicine
• /
• v.19 no.3
• /
• pp.811-814
• /
• 2005

This clinical study is designed to find the characteristics of heat and cold according to Sasang Constitutions by using a statistical analysis. The study was conducted based on the questionnaire sheets and medical history (clinical data) of 1080 people registered at Sasang Constitution Information Bank (SCIB). The total number of people registered at SCIB was 1083; however, 3 Taeyangin's data were excluded in this study. The statistical analyses results on these data were: Most Taeumins have warm limbs, while Soeumins have cold ones. Taeumin, and Soyangin do not like hot weather, while Soyumin doesn't like coldness. As soeumins' body temperature is relatively lower than that of other constitutions, they tend to sleep tightly under blankets or comforters. Taeumin tend to drink more water because they sweat a lot; while Soeumin drink smaller amount of water because they sweat less. Both Taeumin, and Soyangin like cold food, but Soeumin liked hot food. Soeumin showed strong tendency for hot and cold food, while other constitutions displayed less inclination toward the certain temperature of food. Soeumin certainly had the remarkable response toward changes in heat and cold than other constitutions. The differences written above were proved to be meaningful enough by Chi-square test.

• Health Policy and Management
• /
• v.29 no.4
• /
• pp.394-398
• /
• 2019

Education on the physician continues with undergraduate medical education, graduate medical education, and continuous medical education. The countries such as the United States, Japan, the United Kingdom, German, and others are required to undergo training in the clinical field for 2 years after completing the national medical examination, and to become doctors after passing the clinical practice license test. Korea can obtain a medical license and become a clinical doctor at the same time if it passes written and practical tests after completing 6 years of undergraduate medical education or 4 years of graduate school. About 90% of medical school graduates replace clinical practice with 4-5 years of training to acquire professional qualifications, but this is an option for individual doctors rather than an extension of the licensing system under law. The medical professional qualification system is implemented by the Ministry of Health and Welfare on the regulation. In fact, under the supervision of the government, the Korean Hospital Association, the Korean Medical Association, and the Korean Academy of Medical Sciences progress most procedures. After training and becoming a specialist, the only thing that is given to a specialist is the right to mark him or her as a specialist in marking a medical institution and advertising. The government's guidelines for professional training are too restrictive, such as the recruitment method of residents, annual training courses of residents, dispatch rule of the residents, and the quota of residents of training hospitals. Although professional training systems are operated in the United States, the United Kingdom, France, and Germany, most of them are organized and operated by public professional organizations and widely recognize the autonomy of academic institutions and hospitals. Korea should also introduce a compulsory education system after graduating from medical education and organize and initiate by autonomic public professional organization that meets global standards.

• Restorative Dentistry and Endodontics
• /
• v.39 no.3
• /
• pp.164-171
• /
• 2014

Objectives: Designing in situ models for caries research is a demanding procedure, as both clinical and laboratory parameters need to be incorporated in a single study. This study aimed to construct an informative guideline for planning in situ models relevant to preexisting caries studies. Materials and Methods: An electronic literature search of the PubMed database was performed. A total 191 of full articles written in English were included and data were extracted from materials and methods. Multiple variables were analyzed in relation to the publication types, participant characteristics, specimen and appliance factors, and other conditions. Frequencies and percentages were displayed to summarize the data and the Pearson's chi-square test was used to assess a statistical significance (p < 0.05). Results: There were many parameters commonly included in the majority of in situ models such as inclusion criteria, sample sizes, sample allocation methods, tooth types, intraoral appliance types, sterilization methods, study periods, outcome measures, experimental interventions, etc. Interrelationships existed between the main research topics and some parameters (outcome measures and sample allocation methods) among the evaluated articles. Conclusions: It will be possible to establish standardized in situ protocols according to the research topics. Furthermore, data collaboration from comparable studies would be enhanced by homogeneous study designs.

• Journal of The Korean Association For Science Education
• /
• v.17 no.4
• /
• pp.493-499
• /
• 1997

Many science teachers can be able to miswrite the vocabularies for seven kinds of experimental tool names on blackboard of secondary school in Korean language. The diagnosis test for the miswriting possibility was carried out by science teachers in secondary school. We questioned "How can you write each of Korean vocabulary for seven experimental tools?" to each of one hundred and fourty science teachers in three class of physics, chemistry, and biology during inservice training course of Gyeongsang National University on August in 1997. First of all, for the investigation we showed the real things of seven tools to the teachers and they wrote each vocabulary for each tool name on blackboard in English. In addition we explained the general use of each tool name. And then the teachers answered the vocabularies of them on one written paper. The miswriting results for seven tools were as follows. There appeared various miswriting vocabularies for each tool name. For examples, meas cylinder was miswritten two kinds of Korean name and the miswriting ratio of 4%, Mortar & pestle was miswritten four kinds of name and the ratio of 12%, Beaker & desiccator were miswritten one kind of name and the ratio of 51% and 36%, separately. Separatory funnel & spuit were miswritten two kinds of name and the ratio of 54% and 58%, separately. Schale was miswritten four kinds of name and the ratio of 51%. We might conclude that the cause of miswriting vocabularies for the tool name could be due to the original miswriting in Korean-English or English-Korean dictionaries as well as the seience teachers by themselves.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.34 no.1B
• /
• pp.56-66
• /
• 2009

In the traditional Server/Client architecture, the client connects to the known servers and gets information through web searching. However, nowadays, diverse internet devices providing services (get) working on internet easily. The update interval of the services or information provided by the devices is relatively short. And also they tend to be both a server and a client. In this situation, the way of the traditional information searching such as web searching is not appropriate. In this paper we propose a service push model, where it pushes its service profiles to all the other network devices by broadcasting them on the network. When a device connects to the network newly, it can get all service profiles in the network and it gets service profiles newly pushed by service providers in prompt. Also it can call any service among the service profiles within itself. We implemented a prototype system for the service push model on the JXTA platform based on P2P network. Also we measured the service profile pushing delay, the service discovery time, and the response time of service execution by running test applications written on the prototype system.