• Journal of Biosystems Engineering
• /
• v.29 no.4
• /
• pp.293-300
• /
• 2004

In order to solve the shortage of roughage supply for dairy farm in Korea, the mechanized model system for the production of winter cereal wrap silage in the fellow paddy field was developed in the previous studies. In this study, storage properties after long term storing of the winter cereal wrap silage were investigated. Also, the qualities of the wrap silage which was stored during 4 months were evaluated by sensory testings, analyzing chemical properties(moisture content, pH and organic acids) and investigating the increase of feeding value. The result of this study were summarized as follows; 1. After 300 hours storage, the acid level of the silage decreased slowly to 4.6 -4.8 pH. Also, the temperature was stabilized around 27-28$^{\circ}C$. The silage having below 5.0 pH is a desirable level for the most of good silage. 2. According to the sensory test and chemical property analyzation it was evaluated as the first class silage like a com silage. 3. Also, when the wrap silage are fed to the cattle, the cattle produced milk more 25% than that of conventional feed. 4. As an overall conclusion, winter cereal wrap silage in the fallow paddy field cm be one of the major roughage source in replacement of com and other conventional silage to dairy cattle in Korea.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2005.06a
• /
• pp.1450-1454
• /
• 2005

In this paper, the control strategy of the tension and speed based a prototype bio-wrap winding machine is developed. The decentralized control strategy using PID control algorithm applied for each subsystem is proposed to control the each system's desired outputs, because the tension of each subsystem effects that of next roll system. The computer simulations and the experiment results are presented to show that the proposed control scheme is feasible for a prototype bio-wrap winding machine.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.1 no.1
• /
• pp.140-148
• /
• 1993

When a large automobile sheet metal part is formed in a draw die, the binder wrap is first calculated to predict the initial punch contact location for avoiding wrinkles and severe stretching of its thin blank sheet. Since the boundary of a pseudo blank in calculating a binder wrap by means of a geometrically nonlinear finite element method is unknown in advance, an iteration method is generally used. This paper presents an effective iteration method for correction of the pseudo blank in a binder wrap calculation. For the performance test, two examples are adopted. The calculated results for both examples show the good convergence which wasted solutions are obtained in the second iteration step.

• Journal of Korean Society of Water and Wastewater
• /
• v.26 no.3
• /
• pp.343-354
• /
• 2012

A electro-foaming fusion wrap fitting for polyethylene sewer pipe was built and foaming mechanism has been studied. A foaming sheet, supporting sheet and clamping band is assembled into a all-in-one structured electro-foaming fusion wrap fitting. To specify foaming and fusion of electro-foaming fusion wrap for PE sewer pipe, series of fusion tests were performed in various conditions. A parallel plate compression test up to 50 % of inner diameter deflection has been performed to check integrity of fusion quality and it was found that there were no visible signs of crack in wrapped area of fitting. Also air tightness test based on KS M 3511-2 has been performed to evaluate perfectness of wrap fusion quality and we found there were no pressure drop up to 10 times higher value than KS standard regulation.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2017.05a
• /
• pp.465-465
• /
• 2017

현재 세계적으로 급격한 도시화로 인한 지구 온난화 및 이상기후 현상은 한정된 수자원을 더욱 제한적으로 사용하게 하였고, 이는 곧 물부족 현상뿐만 아니라 물 분쟁까지 야기 시키기에 이르렀다. 이에 따라 본 연구에서는 국내 수리권에 대한 연구를 진행하였으며 수리권 해석 모델인 Water Rigths Analysis Package (WRAP)모델을 국내에 적용하고자 한다. 이를 위해 소양강댐 상류 원통지역의 10년간의 수위자료를 토대로 수위-유량곡선 변경하여 WRAP 모델 하천유량자료를 도출하였다. 이를 바탕으로 WRAP모델 적용하여 우선순위별 수자원분배를 수행하였다. 본 연구를 통한 결과를 이용하여 향후 소양강을 포함한 우리나라 다양한 하천/저수지에 우선순위를 통한 수자원의 분배 분야에 새로운 정보를 제공하고 분배를 보다 용이하게 하게 하는데 크게 기여할 수 있을 것으로 판단된다.

• Korean Journal of Air-Conditioning and Refrigeration Engineering
• /
• v.16 no.3
• /
• pp.241-249
• /
• 2004

A parametric study on the scroll wrap configuration factors of a $CO_2$scroll compressor for heat pump water heater has been carried out. Since there are 7 scroll wrap design parameters and 5 equations relating them, two of the design parameters can be selected as independent parameters. In this study, the wrap thickness and orbiting radius are chosen as independent ones. Computer simulation program has been used to estimate the compressor performance at various combinations of the scroll wrap design parameters. It has been found that there exists optimum combination of the wrap parameters for the highest compressor performance over analyzed ranges of the design parameters.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.11 no.7
• /
• pp.1332-1340
• /
• 2007

This paper describes an efficient hardware design of key wrap/unwrap algorithm for security layer of WiBro system. The key wrap/unwrap core (WB_KeyWuW) is based on AES (Advanced Encryption Standard) algorithm, and performs encryption/decryption of 128bit TEK (Traffic Encryption Key) with 128bit KEK (Key Encryption Key). In order to achieve m area-efficient implementation, two design techniques are considered; First, round transformation block within AES core is designed using a shared structure for encryption/decryption. Secondly, SubByte/InvSubByte blocks that require the largest hardware in AES core are implemented by using field transformation technique. As a result, the gate count of the WB_KeyWuW core is reduced by about 25% compared with conventional LUT (Lookup Table)-based design. The WB_KeyWuW con designed in Verilog-HDL has about 14,300 gates, and the estimated throughput is about $16{\sim}22-Mbps$ at 100-MHz@3.3V, thus the designed core can be used as an IP for the hardware design of WiBro security system.

• Asian Pacific Journal of Cancer Prevention
• /
• v.14 no.6
• /
• pp.3503-3507
• /
• 2013

Background: Although the majority of investigations concerned with TP53 and its protein have focused on coding regions, recently a set of studies highlighted significant roles of regulatory elements located in p53 mRNA, especially 5'UTR. The wrap53${\alpha}$ transcript is one of those that acts as a natural antisense agent, forming RNA-RNA hybrids with p53 mRNA and protecting it from degradation. Materials and Methods: In this study, we focused on the mutation status of exon $1{\alpha}$ of the WRAP53 gene (according to exon 1 of p53) in 160 breast tumor tissue samples and conducted a bioinformatics search for probable miRNA binding site in the p53/wrap53 overlapping region. Mutations were detected, using single stranded conformation polymorphism (SSCP) and sequencing. We applied the miRBase database for prediction of miRNAs which target overlapping region of p53/wrap53 transcripts. Results: Our results showed all samples to have wild type alleles in exon 1 of TP53 gene. We could detect a novel and unreported intronic mutation (IVS1+56, G>C) outside overlapping regions of p53/wrap53 genes in breast cancer tissues and also predict the presence of a binding site for miR-4732-5p in the 5'UTR of Wrap53 mRNA. Conclusions: From our findings we propose designing further studies focused on overexpression of miRNA-4732-5p and introducing different mutations in the overlapping region of wrap53 and p53 genes in order to study their effects on p53 and its ${\Delta}N$ isoform (${\Delta}$40p53) expression. The results may provide new pieces in the p53 targeting puzzle for cancer therapy.

• Food Science and Preservation
• /
• v.8 no.4
• /
• pp.367-373
• /
• 2001

In order to study the effect of modified atmosphere storage on extending shelf life of King Oyster mushroom was wrapped with PVC film and packed with 20$\mu\textrm{m}$polyolefin(PD941), and effects of temperature(0, 5, 10$^{\circ}C$) in packaging conditions on the respiration and keeping qualities were evaluated. Higher respiratory activity and weight loss were observed at higher temperature. The concentration of O$_2$and CO$_2$ of PVC wrap and polyolefin(PD941) packages for all showed 1∼2% and 10∼14%, respectively. Polyolefin(PD941) package wan superior to the PVC wrap packaging method in Hardness, Hunter L value, Hunter b value and sensory qualities, and reducing weight loss at 0$^{\circ}C$, 5$^{\circ}C$ and 10$^{\circ}C$ compared to PVC wrap. It was found that the optimum shelf-life period of King Oyster mushroom packaged by PVC wrap was estimated to be 50, 28 and 12 days at 0, 5 and 10$^{\circ}C$, respectively, and 50, 32 and 21 days in Polyolefin(PD941).

• Korean Journal of Air-Conditioning and Refrigeration Engineering
• /
• v.20 no.2
• /
• pp.113-120
• /
• 2008

Potential application of the scroll type machine to air compressor for fuel cell has been studied. Among the seven configuration factors which determine scroll wrap profile, the wrap thickness and the orbiting radius were chosen as two independent variables to generate various scroll wrap profiles. A conceptual design practice was conducted for scroll air compressor for SOFC with power output of 2 kW. With larger wrap thickness and orbiting radius, base plate area of the orbiting scroll becomes smaller, so is the axial gas force acting on the base plate, resulting in reduced thrust loss in spite of larger friction velocity. Performance analysis on the designed model showed that its total efficiency was 64.4% with the mass flow rate per unit compressor input of 0.00905 kg/(s kW) for the wrap thickness of 3.5 mm and the orbiting radius of 3.0 mm.