• Journal of Korean Society of Transportation
• /
• v.30 no.1
• /
• pp.31-43
• /
• 2012

Domestic road type-and period-specific driving pattern measurement was required as Korea's participation in developing "Worldwide harmonized light-duty vehicle emission test procedure (WLTP/DHC)" studied by UN WP29. This study measured road driving data reflecting road and traffic conditions of Korea, and analyzed seven types of representative road type-and period-specific driving patterns with driving pattern standardization methodology proposed by WP29. PAMS (Portable Activity Monitoring Systems) equipment was used to collect enormous (35,410km) road driving data. There are significant difference among seven derived driving patterns.

• Journal of the Korean Solar Energy Society
• /
• v.30 no.4
• /
• pp.29-35
• /
• 2010

This study has been carried out empirical research on Transparent Thin-film BIPV modules, BIPV modules installed on the exterior of the building are applied a laminated module 1kWp, double-glazing module 3kWp and triple-glazing module 1kWp. Applied to the total capacity of BIPV modules are 5kWp. In this study, design and construction process of BIPV systems is presented. In addition, through monitoring of the BIPV system, the temperature and the power characteristics of each module were analyzed. During the measurement period, the module temperature measurement results, the maximum surface temperature of $51.5^{\circ}C$ triple-glazing BIPV module showed the highest, followed by double-glazing BIPV module $49.1^{\circ}C$, $44.7^{\circ}C$ laminated modules, respectively. Power output results, the daily average double-layer modules showed 4.10kWh/day, triple-glazing module 1.57kWh, respectively 1.81kWh laminated modules. In particular, the power efficiency of triple-glazing BIPV module was lower than the power efficiency of the laminated BIPV module. This phenomenon is considered to be affected by the module temperature. In the future, BIPV modules in this study the relationship between module temperature and power characteristics plans to identify.

• KIEAE Journal
• /
• v.14 no.3
• /
• pp.23-29
• /
• 2014

With high acknowledgements of environmental conservation and energy saving, many architectural technologies using renewable energy have been recently applied at buildings which take about 20% of total energy consumption. Among renewable energy sources, the photovoltaic is considered as the most highly potential one due to advantages of infiniteness and cleanliness. Also, projects to install renewable energy systems have been continuously performed at deteriorated educational facilities as energy efficient remodeling projects or green school projects by the Korean government. This paper proposes appropriate capacities by school level on installing photovoltaic systems at deteriorated school buildings, based on the balance of annual electricity power demand and supply between buildings and systems. Using the Visual DOE program and Merit program, the appropriate installment capacity of photovoltaic system turned out be 40kWp at elementary school building and 60kWp at middle and high ones. In addition, annual energy use proved to be reduced by 20.2% at elementary school, 26.9% at middle school, and 21.0% at high school by installing photovoltaic systems with the appropriate capacities.

• Food Science of Animal Resources
• /
• v.43 no.4
• /
• pp.594-611
• /
• 2023

Whey protein (WP) has nutritional value, but the presence of β-lactoglobulin (β-LG) and α-lactalbumin (α-LA) cause allergic reactions. In this study, hypoallergenic whey protein hydrolyate (HWPH) was prepared by decomposing β-LG and α-LA of WP using exo- and endo-type proteases. The enzyme mixing ratio and reaction conditions were optimized using response surface methodology (RSM). Degradation of α-LA and β-LG was confirmed through gel electrophoresis, and digestion, and absorption rate, and immunostimulatory response were measured using in vitro and in vivo systems. Through RSM analysis, the optimal hydrolysis conditions for degradation of α-LA and β-LG included a 1:1 mixture of Alcalase and Prozyme reacted for 10 h at a 1.0% enzyme concentration relative to substrate. The molecular weight of HWPH was <5 kDa, and leucine was the prominent free amino acid. Both in vitro and in vivo tests showed that digestibility and intestinal permeability were higher in HWPH than in WP. In BALB/c mice, as compared to WP, HWPH reduced allergic reactions by inducing elevated Type 1/Type 2 helper T cell ratio in the blood, splenocytes, and small intestine. Thus, HWPH may be utilized in a variety of low allergenicity products intended for infants, adults, and the elderly.

• Journal of the Korean Solar Energy Society
• /
• v.26 no.1
• /
• pp.13-19
• /
• 2006

The efficiency of building-integrated photovoltaic(BIPV) system is mainly determined by solar radiation and the temperature of PV modules. The performance of BIPV systems is reported to be different from that of conventional PV systems installed in the open-air. This paper presents the relationship of solar radiation and electricity generation from a 2kWp roof-integrated PV system that is applied as building elements on an experimental house, and the energy saving effect of the BIPV system for a typical house. For the performance evaluation of the BIPV system, it produced a regression equation with measured data for winter days. The regression equation showed that a comparison of the measured electricity generation and the predicted electricity generation of the BIPV system were meaningful. It showed that an annual electricity generation of the system appeared to cover around 52% of an annual electricity consumption of a typical domestic house with the floor area of $96m^2$.

• Journal of the Korean Solar Energy Society
• /
• v.30 no.4
• /
• pp.43-48
• /
• 2010

The performance of photovoltaic systems could be affected by various factors including installing conditions of modules, and their own efficiencies of solar cells and inverters. The installing conditions of a photovoltaic system including array types, tilting angles, azimuth, locations, quantities of sunshine, optimum angles of inclination and separated distance are analyzed using the SolarPro & Minitep SW simulation program, inorder to set up the installing conditions for improving system performance. The result from the simulation of the 500kWp PV system of Kochang with optimal installing conditions compared with normal conditions shows that the capacity factor has been increased from 11.02% to 12.06%.

• 제어로봇시스템학회:학술대회논문집
• /
• 2001.10a
• /
• pp.88.1-88
• /
• 2001

The paper describes a new approach to the organization of an artificial brain for mobile multi-robot systems, where individual robots are not considered as independent entities, but rather forming together a universal parallel and distributed machine capable of processing both information and physical matter in distributed worlds. This spatial machine, operating without any central control, is driven on top by distributed mission scenarios in WAVE-WP language. The scenarios can be written on a variety of levels, and any mixture of them, supporting the needed system flexibility and freedom ...

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.39C no.7
• /
• pp.582-588
• /
• 2014

IMO and IALA have undertaken projects that GMDSS Modernization and E-navigation, which refer to "Future digital communications systems" for a more efficient transmission of voice and data communications in the VHF maritime mobile service. ITU has also resolved in WRC-07 Resolution 357 to study the use of spectrum-efficient technologies in order to provide for the operation of ship and port security and maritime safety systems. IALA and ITU WP5B have coordinated for the technical developments and the spectrum issues. Recommendation ITU-R M.1842-1 has approved by WP5B meeting. This revision provides a wideband data service both 50kHz and 100kHz in the VHF maritime mobile service. This paper has studied E-navigation, its needs for data exchange that includes explanations of the current methods for transmitting data by VHF that based in land mobile radio service. A further technologies trend is estimated for Recommendation ITU-R M.1842-1, that is based on the land mobile radio standards with some tailored to fit the needs of the maritime mobile service.

• KIEAE Journal
• /
• v.14 no.1
• /
• pp.67-74
• /
• 2014

There have distinctly been no the installation criteria and maintenance management of BIPV systems, although the BIPV market is consistently going on increasing. In addition, consideration of the BIPV generation quantity which has been installed at several diverse places is currently almost behind within region in Korea. Therefore, the main aim of this study is to evaluate the BIPV generation and to be base data of reducing rate depending on regional installation angles using PVpro which was verified by measured data. Various conditions were an angle of inclination and azimuth under six major cities: Seoul, Daejeon, Daegu, Busan, Gwangju, Jeju-si for the BIPV system generation analysis. As the results, Seoul showed the lowest BIPV generation: 1,054kWh/kWp.year, and Jeju-si have 5percent more generation: 1,108.0kWh/kWp.year than Seoul on horizontal plane. Gwangju and Daejeon turned out to have similar generation of result, and Busan showed the highest generation: 1,193.5kWh/kWp.year, which was increased by over 13percent from Seoul on horizontal plane. Another result, decreasing rate of BIPV generation depending on regional included angle indicate that the best position was located on azimuth: $0^{\circ}$(The south side) following the horizontal position(an angle of inclination: $30^{\circ}$). And the direction on a south vertical position(azimuth: $0^{\circ}$, an angle of inclination: $90^{\circ}$) then turned out reducing rate about 40percent compared with the best one. Therefore, these results would be used to identify the installation angle of the BIPV module as an appropriate position.

• International conference on construction engineering and project management
• /
• 2020.12a
• /
• pp.201-206
• /
• 2020

Diversification of project delivery methods (PDM) under ever-changing construction business environment has significantly changed the role of project participants. Active efforts to effectively sharing the roles and responsibilities have been observed in the project management offices (PMOs) among owner/operator organizations as well as engineering, procurement, construction and maintenance (EPCM) firms. In order for being effective in a holistic way throughout the project life-cycle, a PMO needs to have 'adequate management skills' as well as 'essential technical capabilities' in cooperating with many different participants. One of the well-known examples of the PMO's tool to support these skills and capabilities is the effective 'work packaging (WP)' that serves as a common basis integrating all relevant information in a structured manner. In an attempt to enhance the construction productivity, the concept of 'advanced work packing (AWP)' has been introduced by Construction Industry Institute (CII). The AWP enables productivity to be improved by early planning of construction packages in the design phase "with the end in mind". The purpose of this study is to identify and evaluate the 'variables' of advanced work packing (AWP) for life-cycle information integration. Firstly, an extended concept of advanced WP based on the CII AWP was defined in order to comprehend many different issues of business functions (e.g. cost, schedule, quality, etc.). A structured list of major components and variables of AWP were then identified and examined for practical viability with real-world examples. Strategic fits and managerial effectiveness were stressed throughout the analyses. Findings, implications and lessons learned are briefly discussed as well.