• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2009년도 춘계학술대회 논문집
• /
• pp.239-246
• /
• 2009

The Mode I interlaminar fracture toughness of woven fabric carbon/epoxy and glass/epoxy composites for a train carbody was measured and FEM analysis was conducted. The woven fabric epoxy composite manufactured by hand lay-up, has high stiffness and strength, good resistance for impact, fatigue, corrosion and in-plane failure. The DCB(Double Cantilever Beam) specimen made of woven fabric epoxy composite had the size of 180mm $\times$ 25mm $\times$ 5mm and the insert of 65mm. The Mode I interlaminar toughness of specimen was measured according to ASTM 5528-01. The crack propagation behavior of the DCB specimen was simulated using FEA with cohesive elements that model the adhesive layer between woven fabric plies.

• 한국염색가공학회지
• /
• 제30권4호
• /
• pp.264-274
• /
• 2018

Immobilization of lysozyme on chitosan non-woven using glutaraldehyde(GA) was investigated. For this, 100 % chitosan non-woven was prepared as novel support for the enzyme immobilization. In addition, free lysozyme activity was examined depending on various pH and temperature by measuring time. Moreover, the optimum immobilization conditions depending on various pH, temperature, immobilization time and lysozyme concentration was evaluated. In addition, thermal stability and storage stability of immobilized lysozyme were measured. The characteristics of immobilized lysozyme was examined by FT-IR, surface morphology, and MTT assay. The results are follows: the optimal immobilization of lysozyme were pH 7.0, $25^{\circ}C$, lysozyme concentration 1.5 mg/ml, immobilization time 240 min. The immobilized lysozyme showed higher thermal stability than the free trypsin. The immobilized lysozyme activity was retained 80 % of its initial activity at $4^{\circ}C$ over 30 days of storage. The lysozyme was immobilized effectively on chitosan non-woven by observation of surface morphology.

• 복식문화연구
• /
• 제20권4호
• /
• pp.475-484
• /
• 2012

The purpose of this study is to help to prevent daily noises by measuring the noise absorption coefficient of the non-woven fabrics and wallpapers which are commonly used in lining and noise absorption coefficient of lining curtain. Seven types of fiber materials for the interior decoration, one non-woven fabric for the wallpaper linings, and two types of textiles for curtain linings are used as the experimental materials in this study. The noise absorption coefficient of the noise absorbents were measured by using impedance tube. And the thermal transmittance were measured by using thermal transmittance tester. The results of this study are as follows; Observing the noise absorption efficiency of each experimental materials, the combination of fiber materials and linings, the noise absorption efficiency of cotton, polyester and silk were similar and for the experimental materials of flax, rayon, acrylic and nylon were resulted the similar noise absorption efficiency. The result of combination of fiber material and black fabric was highest among the combined linings. For the combination of fiber material and non-woven fabric, double layers of non-woven fabric resulted slightly higher noise absorption coefficient result than single layer of non-woven fabric. The thermal transmittance and the sound absorbents of experimental materials were affected by the thickness, density and layer of air of the experimental materials.

• 한국의류산업학회지
• /
• 제3권1호
• /
• pp.15-19
• /
• 2001

The purpose of this study was to determine the thermal characteristics of men's suits ensembles and their fabrics. For the study, 100% wool fabrics were woven with various fabric structure, fabric density and yam count and With the use of these, 12 men's suits were made with the same design. Physical characteristics that affect thermal transport properties, including drapery, cover factor; bulk density, keeping warmth ratio, vapor permeability, air permeability and porosity of the fabrics were measured. In addition, thermal resistance of men's suit ensembles, including Y-shirts, inner wear and socks was measured on the thermal manikin in the environmental chamber. The result of the study was as follows: 1. In terms of fabric structure, keeping warmth ratio of plain woven fabrics was higher than those of twill and satin woven fabrics and also, vapor and air permeability and porosity of plain woven fabrics were higher than those of twill and satin woven fabrics. 2. The result showed that thermal resistance of 12 ensembles were in the range of 0.77clo~0.97clo. 3. There was little correlation between woven condition such as, including structure, fabric density and yam count and thermal resistance of ensembles.

• 복식문화연구
• /
• 제29권5호
• /
• pp.735-746
• /
• 2021

Uiwon-gun (1661-1722) and Sim Ikchang (1652-1725) were people of the upper classes of the Joseon Dynasty, who's belts woven with thread were found in their graves. The purpose of this study is to find a term suitable for the belts of these two people and to reveal the characteristics of the two belts and decipher the 8-character text marked on Shim Ikchang's belt to understand its meaning. The terms used during the Joseon Dynasty related to woven belts include "Gwangdaho", "Daeja", "Bunhapdae", "Sagagda", "Bangseungah", and "Samunjikdae". Among these terms, "Gwangdahoe" is the most suitable to indicate the belts of for both belts. The belts are made of a silk fabric of narrow width. The size of Uiwon-gun's belt is 2.8×199cm, and because it is folded in half lengthwise and sewn, the original width is 8cm. It was woven in the imitation gauze technique. Sim Ik-chang's belt measures 10.5×258cm and is decorated with a woven net at the end. There are water and mountain patterns on both ends of the belt, with 11 lines of flower patterns equally spaced between. The belt is damask, the inscription part is made of brocade with letters expressed in golden thread. The meaning of the inscription is "Made in Hanbu. May you live a long and healthy life".

• 농업과학연구
• /
• 제50권3호
• /
• pp.507-512
• /
• 2023

The traditional oviposition ground for indoor breeding of Luciola lateralis is moss. This study was conducted to find the most suitable alternative oviposition ground that can maintain or increase the oviposition rate of L. lateralis while addressing the problems of larva collection time and larva loss that occur when moss is used. As alternative candidate oviposition ground comprising six colors of non-woven fabric and felt were used to measure the fecundity variation rate of L. lateralis with respect to the color and material of the oviposition ground. In addition, measure the fecundity variation rate of L. lateralis in moss, a traditional oviposition ground, was also measured and investigated for comparison. The investigation showed that the average number of eggs in the non-woven fabric group was higher than that in the felt group. The yellow non-woven fabric had an average number of eggs that was more than 100 times higher than of moss used as a traditional oviposition ground. In the space where the six color non-woven fabric were together, L. lateralis concentrated its oviposition on yellow. These results showed that yellow non-woven fabric can be sufficiently used for efficient indoor mass breeding of L. lateralis while addressing problems caused by moss, a traditional oviposition ground.

• 한국의류학회지
• /
• 제13권3호
• /
• pp.259-267
• /
• 1989

In this paper, the fabric specimen undergoes repeated laundering under given condition. After this cyclic laundering was applied, the crease recoveries of the specimen were measured using shirley crease revovery tester in order to evaluate the effect of factors at given condition during crease deformation. 5 samples of grey plain cloth were desized, alkali-scoured, bleached, whased with water, and air-dried. All tests were made on samples preconditioned to $65\%\;RH\;and\;20^{\circ}C$. The experimental results were analysed statistically to relate crease recoveries and the properties of smaples, recovery periods (time) of crease. Furthermore, the crease recoveries of core-spun yarn woven fabrics were discussed in comparison with those values for $100\%$ combed cotton yarn woven fabric and $65\%$ polyester $35\%$ carded cotton blended yarn woven fabric. The results obtained are as follows; 1. Regardless of materials, remarkable decrease are observed in crease recoveries about 1-5 cycles of the repeated laundering, but slack decrease are observed in crease recoveries after 5 cycle of the re-peated laundering. 2. Crease recoveries ($\alpha$) of core-spun yarn woven fabrics are relate to recovery periods (t) of crease as follows; log$\alpha$=0.01415 log t+2.1168 ($r^2=0.94$) 3. Core-spun yarn woven fabrics were superior to $100\%$ combed cotton yarn woven fabrics and $65\%$ polyester $35\%$ carded cotton blended yarn woven fabric in crease recoveries. 4. Crease recoveries ($\alpha$) of core-spun yarn woven fabrics are relate to cover factor (CF), thickness (T) at pressure 0.5 $gf/cm^2$, weight (W) as follows; log$\alpha$=-0.3482 log CF-0.4924 log T-0.4727 W+2.4243 ($r^2=0.88$) 5. Crease recoveries ($\alpha$) of core-spun yarn woven fabrics are relate to 2HB/B, 2HB/W, $\sqrt[3]{B/W}$, WC/T which are concerning to formation of weared clothes and bending Iran formation behavior as follows: log $\alpha$=0.0091 2HB/B+0.4667 2HB/W+0.0185 $\sqrt[3]{B/W}$+0.0114 WC/T+1.8433 ($r^2=0.86$)

• 한국의류학회지
• /
• 제10권1호
• /
• pp.47-57
• /
• 1986

The purpose of this study is to investigate fatigue phenomema of woven fabric. In order to obtain the basic data which is available for predicting the fabric fatigue phenomena, the change of mechanical properties of woven fabrics caused by the wearing and the changes of mechanical properties of woven fabrics which were subjected to repeated tensile-shearing deformation using fabric testing machine has been investigated and compared. The fatigue of woven fabrics was examined with the value of basic mechanical properties of specimens measured by the KES-F fabric testing system and their hand value and wearing ability. The results were as follows. 1) The fatigue phenomena of woven fabrics by the wearing for 800 hours are different on the position of the body: On the portion of hip, the change of surface property was the greatest, bending hysterisis was greatly increased, thickness weight, stiffness, fullness shearing hysterisis were more increased than original fabric and T.H.V. was decreased. On the portion of knee, decreasing of tensile resilience and increasing of bending, shearing hysterisis were observed greater than any other part, and increasing of stiffness, crispness was more than original fabric. On the bottom area, the changes of mechanical property was comparatively small, H.V. and T.H.V. showed near the value of the original fabric. 2) By drycleaning most of mechanical properties showed the tendency to recover the value of the original fabric, but bending hysterisis and thickess were increased, tensile and com-pression resilience were decreased more than original fabric in all parts. 3) The fatigue phenomena caused by fabric fatigue testing machine were as follows. The decreasing of hystersis in the repeated deformation such as bending, shearing was appeared at the $10^2$ deformation, but with the increasing cycle, the tendency was slightly regained. Handle value was also appeared the lowest value at the $10^2$ deformation.

• 복식
• /
• 제57권1호
• /
• pp.93-104
• /
• 2007

This study is considered about the fabrics culture of Baekje Period by analyzing the fabrics pieces at a inner part of the It-bronze shoes found at the tomb of King Mu-ryeong in 1971 AD. The analysis methods of the fabrics pieces are a photographing of fabrics pieces surface by VMS, Digital camera(Nikon Coolpix 995) and the analysis of samples by SEM, XRD and FT-IR. It is assumed this fabrics pieces are the inner shoes, which consisted of compound woven silk at outward, some of tabby and a hemp at inward and the braids for decoration, of the gilt-bronze shoes. The features are as follows. 1. All of compound woven silk are the warp-faced compound tabby of plain fabrics and the density is various from high to low one. Compound woven silk which is attached the gilt-bronze shoes of the tomb of King Mu-ryeong weaves in high density by a thick thread. The fibers material of compound woven silk prove to be a silk by the analysis of wrap samples by SEM, XRD and FT-IR. 2. Tabby are excavated under the condition which attached on reverse side of compound woven silk. Those ran classify two types. First, the fine weaving by high density of wrap and weft. Second, the loose warp weaving with one warp and some of weft. 3. Hemp is almost ramie by SEM analysis and the density is different. Ramie which supposed to be attached Guem has the very low density. In addition to, Ramie pieces, excavated in condition and weaved finely, proved the conspicuous weaving skill in Baekje period. 4. Various kinds of braid are found and these ones classifies by fiber material and entwining way. Two types out of these are the one of silk thread, decorates the upper, middle parts of compound woven silk shoes and the other of hemp thread, decorates the lower parts.

• 대한토목학회논문집
• /
• 제32권6A호
• /
• pp.419-426
• /
• 2012

굳지않은 콘크리트에는 항상 일정량의 잉여수가 발생하게 된다. 이러한 잉여수는 콘크리트 내부에서 갇힌공기로 남게 되어 내구성을 저하시키는 요인이 되므로 잉여수를 제거할 수 있다면 구조물의 내구성 향상에 큰 도움이 될 것이다. 기존에 많은 연구가 있었지만 투수시트의 특성에 대한 상세한 검토는 부족한 상태이며, 거푸집의 천공에 따른 시공성 저하는 여전히 의문이 있다. 따라서, 본 논문에서는 투수거푸집 시스템에서 직포 및 부직포 투수시트를 적용할 경우의 기초적인 특성을 실험을 통하여 검토하고 시공성 향상을 위해 거푸집에 천공을 하지 않는 투수거푸집에 대한 연구를 진행하였다. 그 결과 투수거푸집에서 직포와 부직포 투수시트를 사용한 경우 직포의 조밀성 및 부직포의 두께 등에 따라 일부 차이가 있었지만 W/C 감소, 표면 평탄성 증가, 표면부 강도 향상이 있었으며, 시멘트손실은 미미하여 적용성이 우수한 것으로 나타났다. 또한, 투수시트 내부에 탈수된 잉여수의 배수통로를 가지고 있는 배수 부직포 투수시트를 적용한 경우 거푸집에 천공을 하지 않고서도 필요한 탈수성능을 발휘할 수 있어 시공성 향상에 기여할 것으로 판단된다.