• Fibers and Polymers
• /
• v.6 no.4
• /
• pp.318-321
• /
• 2005

Demand for the fabric wipes is growing continuously. Wipes in industry are used for cleaning purpose. Cleaning involves rubbing action, so it is very important to know how much frictional force is encountered during the cleaning action. In this study the effects of normal load, sliding speed on frictional characteristics of nonwoven and woven wipes, both dry and wetted with different liquids, against glass and floor tile surfaces have been reported. With the increase in the normal load the coefficient of friction goes on decreasing for both nonwoven and woven wipes and this trend is observed in both dry and wet wipes. The coefficient of friction of both nonwoven and woven wipes against glass surface is in general higher than the floor tile surface. The wipes wetted with water shows an increase in coefficient of friction as compared to dry sample, but there is reduction in the coefficient of friction when the wipe samples are wetted with vegetable oil. In case of dry wipes, the coefficient of friction in case of nonwoven wipe is higher than the woven wipe. In case of woven wipes, the ranges of coefficient of friction either due to change in liquid type, normal load or sliding speed are in general smaller than that in case of nonwoven fabrics.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.25 no.7
• /
• pp.1193-1202
• /
• 2001

The goal of this research is to investigate the effect of fusible interlinings on the mechanical characteristics and appearance related values for the Lyocell fabrics. In this study, to establish optimum fusing conditions, peel strength of the fused fabrics depending on the fusing temperature, pressure and time was measured. Appearance related properties and mechanical characteristics of the fused fabrics ere determined. The reulst are as follows: In the fusing condition of $120^{\circ}C,\;3kgf/textrm{cm}^2$, 15sec, peel strength was excellent. Peel strength was excellent in the case of tencel/cotton fabric, with increasing cover factor of woven interlining, with twill and nonwoven interlining. Flex stiffness was increased in the case of tencel/cotton fabric, with increasing weight of woven interlining, with twill and nonwoven interlining. Drapability was excellent in the case of 100% tencel fabric, with decreasing weight of woven interlining, with plain and woven interlining. Crease recovery was excellent in the case of 100% tencel fabric, with increasing weight of woven interlining, with twill and woven interlining. Shear and bend properties were increased in the case of tencel/cotton fabric, with increasing weight of woven interlining, with plain and nonwoven interlining.

• The Korea Journal of Herbology
• /
• v.25 no.1
• /
• pp.9-12
• /
• 2010

Objectives : To evaluate the extraction efficiency of water decoction with or without non-woven fabric underlying comparison of the HPLC (high-performance liquid chromatography) profiles of the hesperidin which is the standard of Citri Pericarpium. Methods : Pyungwisan, which is comprised of Atractylodis Rhizoma, Magnoliae Cortex, Citri Pericarpium, Glycyrrhizae Radix, Zingiberis Rhizoma, and Ziziphy Fructus, was extracted in boiling water with non-woven fabric or without non-woven fabric. Then hesperidin content was analyzed by HPLC. Results : The contents of hesperidin in the water extract of Pyungwisan which was decocted without non-woven fabric showed $219.57{\pm}2.51\;mg/g$ and $138.90{\pm}6.32\;mg/g$ in with non-woven fabric decoction. Conclusions : These results suggest that herbal decoction without non-woven fabric might increase extraction efficiency.

• Fashion & Textile Research Journal
• /
• v.12 no.3
• /
• pp.272-278
• /
• 2010

The purpose of this study was to research about Dobby weave design using Computer-Aided Weaving System. For performing this design study, first, it was researched the characteristics of the classified woven fabrics, weaving processing, structure of Dobby loom, and Computer-Aided Dobby Weaving system theoretically. To develop Dobby woven design, Patternland Weave Simulator(U.S.A) for computer weave system was used. Among the developed Dobby woven designs by computer weaving system, mainly three of them were selected and woven into Dobby loom. To see the visual image of the fabric end-use, some of the scanned Dobby fabrics were simulated to the three-dimensional virtual images by Alias CAD system. The result of this study can be summarized as follows. Before the step of weaving Dobby fabrics on the woven design works, Computer-Aided Weaving system can be done very easily to apply the design step of Dobby woven fabrics, specially in case of the complicated woven structure. Also the usage of the simulation CAD system in visual image of the final products, ultimately can be saved cost and developed the higher value-added goods in more response to consumer demands.

• Journal of Fashion Business
• /
• v.23 no.6
• /
• pp.27-36
• /
• 2019

This study aimed to analyze the color differences by warp direction of textile mosaics by focusing on two representative textile wallcovering types, woven and string. Mosaics made of string can be expressed as having three-dimensionality based on color differences resulting from the warp direction of the string. String wallcoverings, unlike woven or non-woven wallcoverings, only have vertically oriented warp lamination on the backing paper without weft, and therefore, the reflection and backing color can be expressed differently depending on the angle of the mosaic. In this study, two identical wallcoverings were manufactured using the same materials but using different textile types, woven and string. The wallcoverings underwent die-cutting by each angle and were deployed in cube form. The analysis was based on ISO 5631-1:2015. The color difference between the two wallcoverings, woven and string, was shown as ΔE* 9.29. Based on the standard deviation of the color difference for each mosaic angle, woven ranged from ΔE* 0.09 to 0.94 and string ranged from ΔE* 1.92 to 3.74, showing a larger color difference. Thus, using the color differences of string to create a mosaic wallcovering improved dimensionality.

• Journal of the Korea Fashion and Costume Design Association
• /
• v.24 no.1
• /
• pp.35-43
• /
• 2022

This study aims to analyze the physical properties of non-woven fabric sheets, which continue to grow in the cosmetic market. Non-woven fabric sheets were used as specimens, and a total of 17 samples were analyzed. To evaluate the physical properties of the non-woven fabric sheet, the weight, tensile strength, surface properties, free swell absorption, and wet stiffness were tested. Through the results itw was determined that non-woven fabric sheets for mask packs should be manufactured considering fiber arrangement so that the weight is 40 g/m², and the tensile strength should be maintained near 12 kgf. In addition, it was confirmed that the material selection and process conditions should be adjusted so that the free swell absorption is at least 8 g/g, and the wet stiffness is 200 mg. Therefore, since the non-woven fabrics for the mask sheets can be used in various products depending on fabric composition, this study will be expected to be basic data for the continuous growth of the sheet-type mask packs coming to market.

• Journal of the Korean institute of surface engineering
• /
• v.56 no.5
• /
• pp.309-319
• /
• 2023

Non-woven fabric is a textile product made by spinning thermoplastic polymers without manufacturing processes such as stretching, doubling, twisting, weaving, and knitting to form a sheet-shaped web in which fibers are tangled with each other, and then combining them by mechanical and physical methods. In addition, the non-woven fabric manufacturing process has various raw material choices, high productivity, so it is a textile manufacturing technology that can have various uses and increase added value. This study was conducted to control the shape and physical properties of products by improving the manufacturing method of melt-blown non-woven fabrics using process technology that easily changes the shape of non-woven fabrics and improves mechanical properties. In particular, it is considered that a non-woven fabric with a thin material shape and improved mechanical properties will be easily applied to a continuous secondary battery manufacturing industry such as roll to roll operation.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.37 no.4
• /
• pp.497-502
• /
• 2013

In this study, the interlaminar fracture toughness in mode I of a hybrid composite inserted with different types of non-woven tissues was determined. The interlaminar fracture toughness in mode I is obtained by a double cantilever beam test. The experiment is performed using three types of non-woven tissues: 8 $g/m^2$ of carbon tissue, 10 $g/m^2$ of glass tissue, and 8 $g/m^2$ of polyester tissue. Considering a specimen with no non-woven tissue as a reference, the interlaminar fracture toughness in mode I of specimens inserted with non-woven carbon and glass tissues decreases by as much as 6.3% and 11.4%, respectively. However, the fracture toughness of a hybrid composite specimen inserted with non-woven polyester tissue increases by as much as 69.4%. It is considered that the specimen inserted with non-woven polyester tissue becomes cheaper, and lighter, and the value of the fracture toughness becomes much greater than that of the non-woven carbon tissue.

• Korean Journal of Plant Resources
• /
• v.13 no.2
• /
• pp.111-117
• /
• 2000

In an attempt to select grape bag, which elevates grape quality and make easy maturation period determination, the following research was carried out at Chungbuk Institute of Agricultural Technology, Grape Experiment Station. Light transmittance rate of bag reached to 11-65% with non-woven fabric and non-dripped vinyl bags. Non-dripped vinyl perforation and white painting bag resulted in 50 and 75%, respectively. Berry weights in non-woven fabric and non-dripped vinyl bag were high than that in paper bag. Non-dripped vinyl perforation 50%, white painting bag brought into fruit cracking, shattering, and rotten fruit, making the investigation difficult. Maturation period preceded about 1-4 day with non-woven fabric and non-dripped vinyl compared with that in paper bag. Soluble solids content with non-woven fabric and non-dripped vinyl bags was high and acidity showed a reverse result. Coloring extent was developed rapidly with non-woven fabric and non-dripped vinyl than paper bag. During initial state of coloring, coloring was rapid with Maekban-Stone mixed non-woven fabric and non-dripped vinyl + non-woven fabric bag. This was rapid with non-woven fabric bag as long appropriate maturation period. Abnormal berry rate was 5.4-7.0% with paper and non-woven fabric bags but brought about as much as 16.6-100% with non-dripped vinyl and it's mixed bags. Appearance quality was the best with index 9.0 for non-woven fabric bag. Maekban-Stone mixed non-woven fabric but non-dripped vinyl performance 50% white painting bag was the least, showing index 1.0. The time consumed for maturation determination was reduced to 74-93% with non-woven fabric and non-dripped vinyl bag compared with 17.4h/10a with paper bag.

• Fibers and Polymers
• /
• v.7 no.1
• /
• pp.79-84
• /
• 2006

This paper deals with the grey fabric deformation during relaxation. It investigates the effect of twist direction and twist liveliness on the 2/2 twill weave woven fabric distortion, during relaxation This experimental work shows that twist liveliness increases the natural tendency of the twill weave woven fabric to skew. In addition when the twist direction of the warp and weft is opposite to each other the bias curling occurs too.