• 한국ITS학회 논문지
• /
• 제3권1호
• /
• pp.13-19
• /
• 2004

본 논문에서는 낮은 위상잡음과 고신뢰성을 갖는 전압제어 발진기를 비선형 설계하였으며 그 위상잡음을 Lesson식과 비교하여 잘 일치함을 확인하였다. 전압제어 발진기의 위상잡음을 개선하기 위하여 유전체 공진기와 결합하는 마이크로 스트립 라인을 고임피던스 변환기를 이용함으로써 공진회로의 Q값이 그대로 능동소자에 전달되도록 하였다. 또한 worst case 해석 및 part stress 해석을 수행함으로써 전압제어 발진기의 신뢰도를 높였다. 제작된 전압제어 발진기는 0$\~$12 V의 제어전압에서 0.56 MHz/V의 튜닝대역을 가지고 있으며 160 mW의 DC 전력을 소모한다. 또한 -116.5 dBc/Hz @100KHz와 -96.51 dBc/Hz @10KHz의 우수한 위상잡음 특성과 7.33 dBm의 출력을 얻었다.

• 한국정보통신학회논문지
• /
• 제9권2호
• /
• pp.408-414
• /
• 2005

본 논문에서는 낮은 위상잡음을 갖는 전압제어 유전체 공진 발진기를 비선형 설계하였으며 그 위상잡음을 Lesson식과 비교하여 잘 일치함을 확인하였다. 전압제어 유전체 공진 발진기의 위상잡음을 개선하기 위하여 유전체 공진기와 결합하는 마이크로스트립 라인으로 고임피던스 변환기를 이용함으로써 공진회로의 Q값이 그대로 능동소자에 전달되도록 하였다. 전압제어 유전체 공진 발진기의 고신뢰성을 확보하기 위해 worst case 해석과 part stress 해석을 수행하였으며 이를 바탕으로 신뢰도 분석을 수행하여 위성중계기의 EOL(End of Life)에서 전압제어 유전체 공진 발진기가 정상적으로 동작할 수 있는 확률을 예측하였다. 제작된 전압제어 유전체 공진 발진기는 0-l2V의 제어전압에서 0.56MHz/V의 튜닝계수를 가지고 있으며 136mw의 DC 전력을 소모한다. 또한 -116.3dBc/Hz (a)100KHz와 -94.18dBc1Hz (a)10KHz의 우수한 위상잡음 특성과 7.33dBm 이상의 출력특성을 얻었다.

• 품질경영학회지
• /
• 제47권4호
• /
• pp.895-910
• /
• 2019

Purpose: The purpose of this study is to lighten the APU (Auxiliary Power Unit) structure of the KAAV (Korea Assault Amphibious Vehicle) through structural analysis. Methods: Commercially-available program (MIDAS.NFX) was used for finite element analysis. Frequency response analysis was performed through linear static and mode analyses to verify the structural stability according to the change of the structural materials. Results: Numerical simulation (linear static, mode and frequency response analyses) results showed that the safety factor of the APU was over 1.5 even under the worst case conditions. The APU made by aluminum structures was expected to be available in the military field, since every requirements in the KDS (Korean Defense Specifications) was fulfilled during the various tests and evaluations. Conclusion: The structural analysis was verified that the structural stability of the APU structure of the KAAV after change of the structural material.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• 제14권5호
• /
• pp.2258-2274
• /
• 2020

In this paper we first propose a new cryptosystem based on our data hiding scheme (2,9,8) introduced in 2019 with high security, where encrypting and hiding are done at once, the ciphertext does not depend on the input image size as existing hybrid techniques of cryptography and steganography. We then exploit our automata approach presented in 2019 to design two algorithms for exact and approximate pattern matching on secret data encrypted by our cryptosystem. Theoretical analyses remark that these algorithms both have O(n) time complexity in the worst case, where for the approximate algorithm, we assume that it uses ⌈(1-ε)m)⌉ processors, where ε, m and n are the error of our string similarity measure and lengths of the pattern and secret data, respectively. In searchable encryption, our cryptosystem is used by users and our pattern matching algorithms are performed by cloud providers.

• Journal of Power Electronics
• /
• 제9권5호
• /
• pp.757-771
• /
• 2009

This paper proposes a systematic approach to the modeling of the small-signal characteristics of three-phase bridge boost rectifiers under non-sinusoidal conditions. The main obstacle to the conventional synchronous d-q frame modeling approach is that it is unable to identify a steady-state under non-sinusoidal conditions. However, for most applications under non-sinusoidal conditions, the current loops of boost rectifiers are designed to have a bandwidth that is much higher than typical harmonics frequencies in order to achieve good current control for these harmonic components. Therefore a quasi-static method is applied to the proposed modeling approach. The converter small-signal characteristics developed from conventional synchronous frame modeling under different operating points are investigated and a worst case point is then located for the current loop design. Both qualitative and quantitative analyses are presented. It is observed that operating points influence the converter low frequency characteristics but hardly affect the dominant poles. The relationship between power stage parameters, system poles and zeroes is also presented which offers good support for the system design. Both the simulation and experimental results verified the analysis and proposed modeling approach. Finally, the practical case of a parallel active power filter is studied to present the modeling approach and the resultant regulator design procedure. The system performance further verifies the whole analysis.

• 항공우주기술
• /
• 제4권1호
• /
• pp.86-94
• /
• 2005

본 연구는 원격측정명령처리기 성능검증모델의 개발을 위해 수행된 설계, 해석, 제작 및 시험에 관한 것이다. CTU EQM의 각 보드별 주요 요구 규격에 따른 로직 설계를 수행하였으며 최악조건해석, 소자스트레스 해석, 신뢰도 해석, FMECA 해석 및 우주환경 및 발사환경 해석을 통해 설계의 타당성을 분석하였으며, 보드 제작 및 조립 후 수행된 기능 시험, 환경시험 및 ETB 시험을 통해 CTU EQM의 모든 성능을 확인하였다.

• 한국물환경학회지
• /
• 제33권6호
• /
• pp.640-649
• /
• 2017

The purpose of this study is the analysis of the water quality spatial characteristics for the main stream of Nakdong River in consideration of the tributary inflow. The flow and water quality (BOD, TOC, TP) data for 32 monitoring stations located in the main stream and the tributaries of Nakdong River were collected from 2003 to 2016. From the results of the flow and water quality analyses for each site, a status map of the flow and the water quality for Nakdong River was produced. The water quality of each river section was classified according to seven river-environment standards. The water quality changes in the main stream before and after the confluence were analyzed spatially. As a result, the water quality of Kumho River, in particular the Kumho B to Kumho C section, is the worst among the tributaries. In addition, the water quality grades of the lower streams such as Nam River and Miryang are worse than that of the upper streams of the Nakdong River. In the case of the main stream, the water quality grades of the sections between the Wicheon and Nam River confluences and the section from Nakbon L to Nakbon N are relatively poor.

• Journal of Astronomy and Space Sciences
• /
• 제27권3호
• /
• pp.253-262
• /
• 2010

The electrical power system (EPS) of Korean satellites in low-earth-orbit is designed to achieve energy balance based on a one-orbit mission scenario. This means that the battery has to be fully charged at the end of a one-orbit mission. To provide the maximum solar array (SA) power generation, the peak power tracking (PPT) method has been developed for a spacecraft power system. The PPT is operated by a software algorithm, which tracks the peak power of the SA and ensures the battery is fully charged in one orbit. The EPS should be designed to avoid the stress of electronics in order to handle the main bus power from the SA power. This paper summarizes the results of energy balance to achieve optimal power sizing and the actual trend analysis of EPS performance in orbit. It describes the results of required power for the satellite operation in the worst power conditions at the end-of-life, the methods and input data used in the energy balance, and the case study of energy balance analyses for the normal operation in orbit. Both 10:35 AM and 10:50 AM crossing times are considered, so the power performance in each case is analyzed with the satellite roll maneuver according to the payload operation concept. In addition, the data transmission to the Korea Ground Station during eclipse is investigated at the local-time-ascending-node of 11:00 AM to assess the greatest battery depth-of-discharge in normal operation.

• Advances in concrete construction
• /
• 제5권2호
• /
• pp.117-143
• /
• 2017

The attack of environmental aggressive agents progressively reduces the structural reliability of buildings and infrastructures and, in the worst exposition conditions, may even lead to their collapse in the long period. A change in the material and sectional characteristics of a structural element, due to the environmental damaging effects, changes its mechanical behaviour and varies both the internal stress redistribution and the kinematics through which it reaches its ultimate state. To identify such a behaviour, the evolution of both the damaging process and its mechanical consequences have to be taken into account. This paper presents a computational approach for the analysis of reinforced and prestressed concrete elements under sustained loading conditions and subjected to given damaging scenarios. The effects of the diffusion of aggressive agents, of the onset and development of the corrosion state in the reinforcement and the corresponding mechanical response are studied. As known, the corrosion on the reinforcing bars influences the damaging rate in the cracking pattern evolution; hence, the damage development and the mechanical behaviours are considered as coupled phenomena. The reliability of such an approach is validated in modelling the diffusion of the aggressive agents and the changes in the mechanical response of simple structural elements whose experimental behaviour is reported in Literature. A second set of analyses studies the effects of the corrosion of the tendons of a P.C. beam and explores potentially unexpected structural responses caused by corrosion under different aggressive exposition. The role of the different types and of the different positions of the damaging agents is discussed. In particular, it is shown how the collapse mode of the beam may switch from flexural to shear type, in case corrosion is caused by a localized chloride attack in the shear span.

• Safety and Health at Work
• /
• 제10권4호
• /
• pp.420-427
• /
• 2019

Introduction: To prevent and manage the societal and economic burden of occupational diseases (ODs), countries should develop strong prevention policies, health surveillance and registry systems. This study aims to contribute to the improvement of OD surveillance at national level as well as to identify priority actions in Turkey. Methods: The history and current status of occupational health studies were considered from the perspective of OD surveillance. Interpretative research was done through literature review on occupational health at national, regional and international level. Analyses were focused on countries' experiences in policy development and practice, roles and responsibilities of institutions, multidisciplinary and intersectoral collaboration. OD surveillance models of Turkey, Belgium and the Netherlands were examined through exchange visits. Face-to-face interviews were conducted to explore the peculiarities of legislative and institutional structures, the best and worst practices, and approach principles. Results: Some countries are more focused on exploring OD trends through effective and cost-efficient researches, with particular attention to new and emerging ODs. Other countries try to reach every single case of OD for compensation and rehabilitation. Each practice has advantages and shortcomings, but they are not mutually exclusive, and thus an effective combination is possible. Conclusion: Effective surveillance and registry approaches play a key role in the prevention of ODs. A well-designed system enables monitoring and assessment of OD prevalence and trends, and adoption of preventive measures while improving the effectiveness of redressing and compensation. A robust surveillance does not only provide protection of workers' health but also advances prevention of economic losses.