• Tribology and Lubricants
• /
• 제22권3호
• /
• pp.144-148
• /
• 2006

The experimental investigation was performed to find the associated changes in characteristics of fretting wear with various water temperatures. The fretting wear tests were carried out using the zirconium alloy tubes and the grids with increasing the water temperature. The tube materials in water of $20^{\circ}C,\;50^{\circ}C\;and\;80^{\circ}C$ were tested with the applied load of 20 N and the relative amplitude of $200{\mu}m$. The worn surfaces were observed by SEM, EDX analysis and 2D surface profiler. As the water temperature increased, the wear volume was decreased, but oxide layer was increased on the worn surface. The abrasive wear mechanism was observed at water temperature of $20^{\circ}C$ and adhesive wear mechanism occurred at water temperature of $50^{\circ}C,\;80^{\circ}C$. As the water temperature increased, surface micro-hardness was decreased, but wear depth and wear width were decreased due to increasing stick phenomenon. Stick regime occurred due to the formation of oxide layer on the worn surface with increasing water temperatures

• Tribology and Lubricants
• /
• 제27권4호
• /
• pp.193-197
• /
• 2011

Friction behavior of nanoporous anodic aluminum oxide(AAO) film was investigated. A 60 ${\mu}m$ thick AAO film having nanopores of 45 nm diameter with 105 nm interpore-diatance was fabricated by mild anodization process. The AAO film was then saturated with paraffinic oil. Reciprocating ball-on-flat sliding friction tests using 1 mm diameter steel ball as the counterpart were carried out with normal load ranging from 0.1 N to 1 N in an ambient environment. The morphology of worn surfaces were analyzed using scanning electron microscopy. The friction coefficient significantly increased with the increase of load. The boundary lubrication layer of paraffinic oil contributed to the lower friction at relatively low load (0.1 N), but it is less effective at high load (1 N). Plastic deformed layer patches were formed on the worn surface of oil-enriched AAO at relatively low load (0.1 N) without evidence of tribochemical reaction. On the other hand, thick tribolayers were formed on the worn surface of both oil-enriched and as-prepared AAO at relatively high load (1 N) due to tribochemical reaction and material transfer.

• Tribology and Lubricants
• /
• 제26권1호
• /
• pp.14-20
• /
• 2010

Tribological properties of nanoporous structured alumina film was investigated. Alumina film (AAO: anodic aluminum oxide) of $60{\mu}m$ thickness having nanopores of 45 nm diameter with 105 nm interpore-diatance was fabricated by mild anodization process. Reciprocating ball-on-flat sliding friction tests using 1 mm diameter steel ball as a counterpart were carried out with wide range of normal load from 1 mN to 1 N in an ambient environment. The morphology of worn surfaces were analyzed using scanning electron microscopy. The friction coefficient was strongly influenced by the applied normal load. Smooth layer patches were formed on the worn surface of both AAO and steel ball at relatively high load (100 mN and 1 N) due to tribochemical reaction and compaction of wear debris. These tribolayers contributed to the lower friction at high loads. Extremely thin layer patches, due to mild plastic deformation of surface layer, were sparsely distributed on the worn surface of AAO at low loads (1 mN and 10 mN) without the evidence of tribochemical reaction. Delaminated wear particles were generated at high loads by fatigue due to repeated loading and sliding.

• 한국의상디자인학회지
• /
• 제18권3호
• /
• pp.57-70
• /
• 2016

Gutnori(ritual A Comparative Study on Shaman's Costume of south coast Byeolsingut in Korea and the Guizhou Nahui in China play) refers to a play in the form of showing actual appearance of god and actual comedic gag with gutguri rhythm. In order to carry out a comparison between the shaman's costume in Korea and China, this study will delve into the types of shaman costumes that are worn in the gutnoris(mask plays) performed in Korean guts and those of China performed in Nahui. As research method, literature reviews and field surveys have been conducted concurrently. In terms of literature reviews, previous research have been studied centrally. For field surveys, Korean gut, Byeolsingut performance was observed for 2 days 1 night between 1st Feb. 2014-2nd Feb. 2014 in the south coast and Chinese Nahui in Guizhou was observed for 2 days 1 night between 25th Nov. 2014-26th Nov. 2014. By comparing Shaman's costume that is worn in Korean shamanism with that of Chinese shamanism as a partial means of understanding the uniqueness of Korean shaman's costume, the following conclusion was derived upon focusing on the common types of gutnori costumes and organizing them. As a universal trait for shaman's costumes in gutnori and nahui in Korea and China, traditional clothing were worn. A unique trait for shaman's costume in gutnori and nahui in Korea and China, deity expressions were shown in both cases using colors.

• 한국의류산업학회지
• /
• 제18권4호
• /
• pp.399-411
• /
• 2016

This research reviewed the developmental process of domestic outdoor wear and later analyzed the images given out by men's outdoor wear. The research results are as follows. First, military supplies left by American soldiers were dyed or reformed and then worn, and daily wear were mainly worn in the 1960s. Wears made from light and waterproof materials were worn and equipments were used in the 1970s. High functioning materials which allowed simultaneous breathability, waterproof and thermal insulation functions were used for wears in the 1980s. For the jacket especially, functionality was enhanced sith zippers, snaps and velcro to prevent cold air penetration in the 1990s. Florescent piping decorations and logo decorations, and prints and colors which reflected the trend, were used to emphasize fashionity and decorativeness in the 2000s. Second, Sophisticated image emphasized urban feeling with toned-down windbreaker jackets without much detail, with down jacket and pants. Casual image expressed a relaxed feeling with windbreaker jacket, shirts, jumper, vest and pants made of cotton, mesh knit and denim. Active image emphasized functionality by brightly colored windbreaker jackets, down jacket and pants. Ethnic image expressed an exotic mood with windbreaker jackets with stylized prints, with jumper, down jacket and pants. Military image showed a strong masculine feeling with jackets adorned with epaulettes, khaki colors and camouflage prints, with jumper, T-shirts, vest, shorts and pants. Avantgarde image exuded an experimental and unique feeling with jackets made of various colors and materials, such as cotton, jersey and glossy materials, with down jacket and jersey pants.

• 복식
• /
• 제60권9호
• /
• pp.58-76
• /
• 2010

In this study, the shapes of po worn by military officers who served During the period of Japanese Invasion of Korea(1592-1598) were investigated. Findings of the study can be summarized as follows. Various types of po that military officers usually wore during the period of Japanese Invasion of Korea includes jikryeong, dapho, dopo, cheolik, aekjureum, jangeui, jungchimak and bangryeongpo. Out of these types, cheolik and jungchimak were most often used by the officers. Po that were usually worn by military officers during the period of Japanese Invasion of Korea as above mentioned is characterized as no difference in length between the front and back of the costume, kalgit and a pair of coat strings which are directly attached to po. The sleeves of the costume are bean chaff-shaped in some cases and just narrowly shaped in other cases. Similarly, the outer seop of po was either double-layered or single-layered. For jikryeong and dapho, mu is usually type of outside wrinkle. For dopo, its rear kit has the inner hem whose right and left edges are usually distant, respectively by 6~16cm, from the back center of the costume. Cheolik and aekjureum usually have either fine or broad pleats. For jangeui and jungchimak, mu is usually trapezoid in shape. Among various types of po which were usually worn by military officers during the period of Japanese Invasion of Korea, most representative are jikryeong from the tombs of Bae Cheon jo, dapho from Shin Yeo Gwan, dopo from general Bak and Bae Cheon Jo, cheolik from Nam Yoo and Cho Gyeong, aekjureum from Shin Yeo Gwan, jangeui from Kim Ham, jungchimak from Bae Cheon jo and bangryeongpo from Cho Gyeong.

• 복식
• /
• 제58권9호
• /
• pp.51-67
• /
• 2008

The purpose of this study is to investigate men's coat of Jikryeongkoim style that were excavated from the tombs of the Yeosan Song family. Findings of the study can be summarized as follows. Except Dapho, all of the above mentioned coat were usually worn in the late 15th and late 16th centuries. Jikryeong and Cheolik were often worn in both of the centuries. But Aekjureum was often worn in the late 15th century and Jikryeong with no side hem and Jikryeong of Dopo style, in the late 16th century. Generally, the men's coat of Jikryeongkoim style had a short fore part and a long rear part, doubled kalgit of banmokpan style and a narrow sleeve in the late 15th century, while fore and rear parts of the same length, kalgit of ordinary style and the sleeve of bean chaff shape in the late 16th century. In both of the centuries, the coat had the outer Seop that was doubled and used short, narrow coat strings to be adjusted. Samgakmu was used to Jikryeong with no side hem and Aekjureum. Out of the coat, those which were lined or padded or quilted with cotten used Samgakmu, but those which were unlined didn't. To adjust the coat, usually, a pair of short, narrow coat strings was used. The coat had the coat strings directly stitched on them or indirectly connected to them by means of the coat string hanger.

• 한국윤활학회:학술대회논문집
• /
• 한국윤활학회 1998년도 제28회 추계학술대회
• /
• pp.300-305
• /
• 1998

A method of calculating wear amount which is based on digitally measured surface profile was suggested. The original profile of worn out profile was estimated from its adjacent surface profile by using least squares curve fitting with Fourier series. The approximated curve was well fitted to original surface profile. With this approach, more accurate calculation of the wear amount will be possible.

• 한국윤활학회:학술대회논문집
• /
• 한국윤활학회 1999년도 제30회 추계학술대회
• /
• pp.200-207
• /
• 1999

A new method for the calculation of a wear amount was suggested. The amount of wear was calculated by the comparison of worn out profile with an estimated original profile. An original profile of wear track was estimated by comparing with outside of wear track. An estimated surface profile was well fitted to the original profile assumed unknown.

• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 2007년도 춘계학술대회 논문집
• /
• pp.421-424
• /
• 2007

Dry sliding wear behavior of ultra-fine grained (UFG) plain low carbon dual phase steel, of which microstructure consists of hard martensite in a ductile ferrite matrix, has been investigated. The wear characteristics of the UFG dual phase steel was compared with that of a coarse grained dual phase steel under various applied load conditions. Dry sliding wear test were carried out using a pin-on-disk type tester at various loads of 1N to 100N under a constant sliding speed condition of 0.20m/s against an AISI 52100 bearing steel ball at room temperature. The sliding distance was fixed as 1000m for all wear tests. The wear rate was calculated by dividing the weight loss, measured to the accuracy of 10-5g by the specific gravity and sliding distance. The worn surfaces and wear debris were analyzed by SEM, EDS and profilometer. Micro-vickers hardness of the cross section of worn surfaces were conducted to analyze strain hardening underneath the contact surfaces. The wear mechanism of the UFG dual phase steel was investigated with emphasis on the unstable nature of the grain boundaries of the UFG microstructure.