• Journal of the Korean Society of Clothing and Textiles
• /
• v.32 no.7
• /
• pp.1129-1136
• /
• 2008

The gaiter is one of the personal protective equipments worn in various industrial sites. This study was performed on humans to investigate the physiological strain of wearing gaiters and to compare control gaiters that are currently on the market and new gaiters that are developed for alleviating heat stress. Experiments were conducted in a climatic chamber of WBGT $30.0\pm0.7^{\circ}C$ under five differed experimental conditions: None, Control A, Control B, New A, New B. The results were as follows. The temperature inside gaiters was significantly lower in both New A and New B than in both Control A and Control B and the difference between news and controls was 1$^{\circ}C$ (p<.01). The humidity inside gaiters in both New A and New B were higher than that in Control A, and lower than that in Control B (p<.01). The outermost surface temperature of the gaiter was the lowest in None and it increased in the following order: New B < New A < Control A < Control B. Mean skin temperature was higher by 0.14$^{\circ}C$ in wearing gaiters than in no gaiters. Skin temperatures in lower body were lower in Control than in New and skin temperature in upper body were higher in Control than in New (p<.01). Local sweat rate, total weight loss and subjective sensations did not show a significant difference according to the gaiters. It was concluded that wearing gaiters affected distribution of skin temperature and local sweat rate.

• Journal of Fashion Business
• /
• v.12 no.6
• /
• pp.11-22
• /
• 2008

The goal of this study is to provide beauticians with the fundamental material to use effectively heat permanent wave in beauty industry as well as their customer's satisfaction. It carried out an experiment with damaged hair of a woman in her late twenties to investigate the change of physical and morphological characteristics by its water content when performing heat permanent wave. After spreading 0g, 1g, 2g, 3g, and 4g of water on damaged hair respectively, heat permanent wave was treated and the change of hair was observed. The change of physical characteristic was compared through permanent wave form of hair, tensile strength and elongation. The change of morphological characteristic was observed through Scanning Electron Microscope(SEM) and Transmission Electron Microscope(TEM). The result of experiment on the physical specificity revealed that permanent wave form was the most ideal when the water content was 2g, also 3g. Though the materials with much moisture content formed the results were not satisfied. The material with 0g of water content didn't make the wave. In terms of tensile strength and elongation, tensile strength was generally reduced as per the damaged degree of hair. On the contrary, elongation was increased. It observed the changes of morphological characteristic that the damage on hair cuticle was deepen, as its moisture content was decreased, and cuticle's surface was worn away. The observation of fine structure on hair section by transmission electronic microscope also certainly showed the result that damaged hair having experience with chemical treatment had got much damaged to hair cuticle as well as hair cortex. Generally chemical treatment makes hair damaged. Under consideration of this aspect, the ultimate goal of this thesis is to minimize the damage of hair caused by chemical treatment and get the satisfaction on the hair style. According to the result of experiment, the damaged hair whose moisture content was 3g showed the best permanent wave form.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.37 no.1
• /
• pp.64-75
• /
• 2013

This study suggests basic data on optimum thermal insulation for spring wear through an investigation of subjective thermal sensation, self-health image and actual wearing conditions. A survey of university students using a self-administered questionnaire was conducted to collect data on subjective thermal sensation, self-health image, wearing conditions, demographics and physical characteristics. The variable of wearing conditions was measured as the response to the clothing they were wearing. Garment items (26 types for males and 41 types for females) were suggested and the items worn by the students were converted into the thermal insulation values for clothing. The main results are as follows. As for the body type perception, males perceived themselves as not fat while females perceived themselves as not thin. As for the health perception, males perceived themselves healthier than females. As for the climate adaptability perception, females were more sensitive to cold than males. The average thermal insulation of clothing was 0.97clo (0.34-1.95clo) with higher insulation for males than females. Students were more sensitive to the cold when their BMI was lower, their body surface area per body weight was larger, and the more they perceived themselves as not healthy. There was a significant correlation between the self-health image of sensitiveness to cold and the thermal insulation of clothing. The results were synthetically discussed in terms of environmental physiology.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.26 no.1
• /
• pp.16-23
• /
• 2015

In this paper, a bent microstrip patch antenna, which is suitable for band-type wearable devices and RF configuration, to be used in the WCDMA2100 mobile network is proposed. The proposed antenna using RF configuration which is consisted of separated Tx and Rx frequency band is designed to operate or function in WCDMA2100 Tx frequency band only and it is not strongly affected by the human body because of the conductor at the bottom side. At both flat case and bent case, the proposed antenna's maximum gain satisfies at least 5.3 dBi, and its -6 dB return loss bandwidth is wider than 20 MHz. The simulated surface absorption rate($SAR_{1g}$) result is under 0.7 [W/kg]. The proposed antenna suits in band-type wearable devices which is worn on wrists or arms.

• Proceedings of the SAREK Conference
• /
• 2008.06a
• /
• pp.189-193
• /
• 2008

Performance of refrigerant oil at the thrust-bearing and at the journal-bearing of a scroll compressor is a significant factor. This paper presents the friction and anti-wear characteristics of nano oil with a mixture of a refrigerant oil and carbon nano particles in the journal bearing of scroll compressors. The characteristics of friction and anti-wear using nano-oil is evaluated using the disk on disk tester and the journal bearing tester for measuring friction surface temperature and the coefficient of friction at the journal bearing tester. In journal bearing test, the average friction coefficient of high concentration nano-oil was decreased down to 18% compared to raw oil under 4,500 N and 3,600 rpm. It is believed that nano particles can be coated on the wear surfaces and the interaction of nano particles between surfaces can be improved the lubrication in the friction surfaces. Worn surfaces of frictional specimen were measured with straightness. carbon nano oil enhances the characteristics of the anti-wear and friction at the joural bearing of scroll compressors.

• The Research Journal of the Costume Culture
• /
• v.17 no.6
• /
• pp.992-1008
• /
• 2009

This study is to present a female high school summer blouse with high movement functionality and satisfying appearance. For the experimental research 6 subjects with closest average body shapes and their body surface was measured at beginning and after selecting a representative movement the tested uniform was worn and the appearance and movement functionality was evaluated. The results of this research are as follows. In the research with the aims to improve the sleeve designed the height in 3 types as A.H/4+3, A.H/4+2, A.H/4+1 and their evaluation showed that in the order of best appearance was A.H/4+2, A.H/4+1, A.H/4+3. In the order of best comfort was A.H/4+2, A.H/4+3, A.H/4+1 and the best order for movement functionality was A.H/4+1, A.H/4+2, A.H/4+3. Additional height types designed produced from elastic materials were A.H/4+3, A.H/4+2, A.H/4+1 and the resulting order of appearance was A.H/4+3, A.H/4+2, A.H/4+1, order of comfort was A.H/4+3, A.H/4+2, A.H/4+1 and the order of movement functionality was A.H/4+1, A.H/4+2, A.H/4+3. Integrating these results shows that in using the same concurrent materials, the experiment pattern of setting the sleeve height as A.H/4+2 was the best while in using elastic materials, the experiment pattern of setting the sleeve height as A.H/4+3 was the best.

• Journal of the Korean Society of Propulsion Engineers
• /
• v.17 no.5
• /
• pp.95-100
• /
• 2013

The important design factors for designing solid lubricating of dynamic seal are tightness, wear resistance and lubricant films. In this study, the effect factors influenced solid lubricating properties of the graphite were analyzed and wear behaviour caused for various test conditions was compared with results obtained from reciprocating wear tests. Also the optimal conditions for formation of lubricant films were investigate to evaluate wear properties of graphite materials. The repeated procedure for the formation of wear particles and lubricant films, and the dissipation of lubricant films was estimated the wear mechanisms with changes of wear depth. Therefore the lubricant film of graphite seal was generated by adhesion of wear particles on the worn surface and it was very useful in wear characteristics.

• Journal of Dental Rehabilitation and Applied Science
• /
• v.19 no.3
• /
• pp.239-245
• /
• 2003

The occurrence and pattern of tooth wear are related to cultural, dietary, occupational, and geographic factors, Excessive occlusal wear can result in pulpal exposure, occlusal disharmony, functional inability. Surface loss can be differentiated into 3 general causal categories: i) mechanical loss, which includes attrition, ii) abrasion chemical loss including erosion, and finally iii) a proposed biomechanical category described as abfraction. Considering that mechanical wear is frequently asymptomatic, patients may have parafunctional habit. Structured clinical decision analysis in fixed prosthodontics, as other branches of dentistry do, allows the practitioner to consider the patient's problems more thoroughly based on the clinical data and extenuation factors. This discipline of decision making is intended to complement the experience level and educational background of the clinician in assisting the patient through the decision process. Additionally, CDA helps the clinician define not only the pre-existing condition of the patient prior to irreversible therapy, but also better treatment strategies for the patient over an extended period. The systematic nature of decision analysis stimulates the dentists to pay further attention to those factors, which is germane to the overall complexity of the case, and exclude factors, which have little influence on its final outcome. Further implementation of computerized databases, procedural outcome probabilities based on clinical and laboratory studies and the clinical experience of those who use it, may provide quite a promising future in the field of structured and formalized clinical decision analysis.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.15 no.4 s.40
• /
• pp.417-430
• /
• 1991

The purpose of this study is to evaluate the level of seasonal adaptability of rural residents from a viewpoint of clothing weight. In this study, the 631 rural residents of both sexes and all generations were selected from 5 rural districts of Kyunggi, Kangwon, Chungnam, Chonnam and Kyungbuk province, and the survey on clothes worn by subjects carried out 4 times-once in each season-from 1989. 7 to 1990. 4. The clothing weight per a unit body surface area that is the index of clothing insulative value was calculated and the seasonal variations of clothing weight were investigated in each region, sex and age. The results of this study were as follows. 1. The clothing weight changed with the season and that increased in order of summer, autumn and spring, winter. But there was no significant difference between spring and autumn. 2. In general, the clothing weight of males was havier than that of females through out the year But the underwear clothing weight of males was lighter than that of females. 3. There were significant differences of clothing weight among age groups in the spring, autumn and winter and $14\~29$ age group had smallest clothing weight. Clothing weight increased with age above 29 years and decreased with age below 20 years. In the summer there was no significant di florence of clothing weight among age groups except that clothing weight of $14\~19$ age was significantly havier than the others. 4. The thermal sensation of the clothed body was comfortable in the spring, autumn and winter but that was warm in the summer. 5. The seasonal adaptability of rural adults from a viewpoint of clothing weight was relatively good but the children's clothing life had some problem because they wore too much.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.33 no.9
• /
• pp.1430-1440
• /
• 2009

This study is on the abstract expressionist techniques among the art activities variously expressed in modern fashion. Its significance lies in making fashion artistic through the combination of fashion and art in contributing to the development of creative fashion culture. In terms of method, documents are used to characterize the concept of abstract expressionism, the works of representative artists, and the panting techniques in relation to modem art based on existing literature. Fashion-related anthology, domestic, and foreign fashion magazines were used to analyze the abstract expressionism applied to modern fashion since 2000. According to the findings, the abstract expressionism applied to modern fashion showed artistic expressions with the abstract beauty by chance, using only the images or techniques similar to those in abstract expressionism. Expressionist works had abstract and dynamic images, as they were given a third dimension through the process of being worn on the human body. Second, details or decorative factors were excluded to ensure the maximum space for expression, modem images were displayed using the simple forms such as silhouettes (spacious or dense) and the beauty of harmony was shown that had beauty emphasized by the expression effects of textile design, the division of space, and the composition of colors. Third, the action painting techniques in modern fashion were used for textile designs printed on the surface of clothes, and the dynamic character of the design was shown by the duplication and juxtaposition of stains created by chance. The color field abstract techniques were shown through printing, texture, and dying, in addition the intense and pure abstract images were displayed by treating clothes like large screens.