• Journal of Preventive Medicine and Public Health
• /
• v.31 no.1 s.60
• /
• pp.139-156
• /
• 1998

Diving related disease including decompression sickness is an important occupational health problem and diving fishermen remain a fairly hazardous occupation in Korea. To prevent diving related disease, we investigate diving patterns, incidence of diving related diseases, and contributing factors of 433 diving fishermen of three coast interviewing and mailing questionnaire in 1996. Mean age of divers was 39.7 years, ranged from 24 to 58 years, 92.8% of these were male, and 58.4% of divers were high school graduates. Mean duration of work as a diver was 12.9 years, ranged from 2 to 40 years. It was found that 70.4% of divers were using hookah system, 22.2% of helmet, and only 2.5% SCUBA. About half of them have learned diving skills from other divers. The peak season of diving was from April to June and mean working days were 20.3 days per month during the peak season. On the average, the divers dived 5-6 times, ranged from 1 to 10 times a day with 51.1 minutes of diving time, ranged from 20 to 120 minutes, at 30 m or 40 m in depth, and 35.5 minute of interval on surface. Most divers ascended slowly making decompression stop, yet the decompression profile used was not based on any scientific knowledge except for their own experiences. It appeared that each diving system had slightly different diving patterns. There were 282(65.0%) divers that suffered from DCS in 1995 and 31.2% of divers were given recompression therapy at a medical facility since they worked as diving fishermen. Skin and musculoskeletal complaints were common symptoms of DCS and 39% of divers experienced a voiding difficulty. In univariate analysis, females have an increased frequency of DCS(93% vs 66% for males). Old age, long duration of work, helmet diving, diving time, diving depth, repetitive diving, and blow up were all contributing factors to DCS. It was found that most diving patterns exceed no decompression limit and did not use the standard decompression table. This suggests that most of divers are at high risk of developing diving related disease with prolonged dives and lengthy repetitive diving in deep depth. Considering the diving patterns and economic aspect of professional diving, the incidence of DCS among diving fishermen in Korea will not decrease in the near future. These findings suggest that periodical health surveillance for divers, and education of health and safety are important for reducing the risk of diving related disease in the population of diving fishermen.

• Journal of the Korean Society of Food Culture
• /
• v.1 no.3
• /
• pp.183-196
• /
• 1986

This study was designed to be link in the chain of the investigation on daily life and consciousness of longevous people in Korea, and to investigate the social life and daily life habit in the past of longevous people. The social life and daily life habit were surveyed on 379 subjects (male 121, female 258) of the aged who were above 80 years of age, from June to November in 1985. 1. 'Generally regular' in the rising time and bedtime between 40 and 60 years of longevous people had the highest figures of 81.8% and 63.1%, respectively. The longevous peoples of 59.4% got up by before 6 a.m., and 61.3% of these aged went to bed from 9 to 11 p.m. But there was no significant difference between male and female. 2. Of the occupation engaged in the longest term of longevous people, the self-management (86.3%) included farming, fishing and household affairs was the highest, whereas administrative position, small-scale management and white-collar worker were only 0.8%, 0.8% and 1.8%, respectively. Therefore, their work involved mainly physical labor (heavy 48.5%, light 47.2%), and mental work was only 2.8% of longevous people. It is believed that this fact was deeply related to the educational degree of them. 3. The longevous people of 58.3% retired from the occupation and household affairs abover 70 years of age, and especially 24.3% of them is including the aged above 80 years of age. 4. The longevous people of 57.2% were shared the role in the home after retirement from the occupation and household affairs, whereas 35.9% of them didn't share. Of the way in killing time in case having no role in the home, 'at home'(50.0%) was the highest, and decreased in the order of 'old people's home' (30.9%), 'ill in bed' (10.3%) and 'asylum for the aged' (8.8%). 5. The acquaintance frequency before retirement from the occupation and household affairs of longevous people showed in the order of 'wide' (38.5%), 'common' (38.0%) and 'narrow' (19.0%), and 56.5% of them had the acquaintance after retirement. 6. Only the longevous people of 38.5% had the hobby and recreation activities of 'more than once' after retirement from the occupation and household affairs, but 53.0% of them was none. Of the kinds of hobby and/or recreation, 'TV-watching' (79.2%) was the highest, and decreased in the order of 'talking with grandchild' (54.2 %), 'working at home' (35.4%), 'religion' (25.0%) and 'chess etc.' (18.1%).

• Journal of Preventive Medicine and Public Health
• /
• v.30 no.2 s.57
• /
• pp.381-391
• /
• 1997

In an epidemiological study of metal workers exposed to metalworking fluids (MWF), the prevalence time of Evolution, seasonal occurrence and clinical type of contact dermatitis were investigated. Compostional analysis of MWF with HPLC, dermatological examination and two consecutive questionnaire surveys were conducted. Study population was divided into two groups ; workers contact to cutting oil and workers contact to rust preventive oil. In the analysis of MWF, aliphatic hydrocarbons, having 12-20 carbons, was most common composition(49.04%) of cutting oil otherwise, major contents (90.99%) of the rust preventives oil were aliphatic hydrocarbons composed of 6-9 carbons. The frequency (point prevalence) of contact dermatitis(CD) was 7(12.7 per 100 subjects) in the dermatological examination of 55 workers. As the result of second survey for contact dermatitis, cumulative prevalence of oil working full-time and recent 1 year prevalence in two groups were 28.0, 16.7 and 15.1, 12.5 per 100 subjects. There were no difference in the prevalence of CD by oil, age, oil contact duration. Summer is the most common evolution season in workers exposed to cutting oil, but not in workers exposed to rust preventive oil. Major clinical type of CD was erythematous papules in both groups. It presents the importance of preventive measures that 51.1% suffer from contact dermatitis had medical care at their own expense, and 47.1% of them felt serious about their contact dermatitis. From the fact that 68.6% think cotton gloves protective apparatus, we emphasize the need for health education.

• Journal of Intelligence and Information Systems
• /
• v.19 no.2
• /
• pp.157-175
• /
• 2013

Since Korean government announced 'Smartwork promotion strategy' in 2010, Korean firms and government organizations have started to adopt smartwork. However, the smartwork has been implemented only in a few of large enterprises and government organizations rather than SMEs (small and medium enterprises). In USA, both Yahoo! and Best Buy have stopped their flexible work because of its reported low productivity and job loafing problems. In addition, according to the literature on smartwork, we could draw obstacles of smartwork adoption and categorize them into the three types: institutional, organizational, and technological. The first category of smartwork adoption obstacles, institutional, include the difficulties of smartwork performance evaluation metrics, the lack of readiness of organizational processes, limitation of smartwork types and models, lack of employee participation in smartwork adoption procedure, high cost of building smartwork system, and insufficiency of government support. The second category, organizational, includes limitation of the organization hierarchy, wrong perception of employees and employers, a difficulty in close collaboration, low productivity with remote coworkers, insufficient understanding on remote working, and lack of training about smartwork. The third category, technological, obstacles include security concern of mobile work, lack of specialized solution, and lack of adoption and operation know-how. To overcome the current problems of smartwork in reality and the reported obstacles in literature, we suggest a novel smartwork service model based on NFC(Near Field Communication). This paper suggests NFC-based Smartwork Service Model composed of NFC-based Smartworker networking service and NFC-based Smartwork space management service. NFC-based smartworker networking service is comprised of NFC-based communication/SNS service and NFC-based recruiting/job seeking service. NFC-based communication/SNS Service Model supplements the key shortcomings that existing smartwork service model has. By connecting to existing legacy system of a company through NFC tags and systems, the low productivity and the difficulty of collaboration and attendance management can be overcome since managers can get work processing information, work time information and work space information of employees and employees can do real-time communication with coworkers and get location information of coworkers. Shortly, this service model has features such as affordable system cost, provision of location-based information, and possibility of knowledge accumulation. NFC-based recruiting/job-seeking service provides new value by linking NFC tag service and sharing economy sites. This service model has features such as easiness of service attachment and removal, efficient space-based work provision, easy search of location-based recruiting/job-seeking information, and system flexibility. This service model combines advantages of sharing economy sites with the advantages of NFC. By cooperation with sharing economy sites, the model can provide recruiters with human resource who finds not only long-term works but also short-term works. Additionally, SMEs (Small Medium-sized Enterprises) can easily find job seeker by attaching NFC tags to any spaces at which human resource with qualification may be located. In short, this service model helps efficient human resource distribution by providing location of job hunters and job applicants. NFC-based smartwork space management service can promote smartwork by linking NFC tags attached to the work space and existing smartwork system. This service has features such as low cost, provision of indoor and outdoor location information, and customized service. In particular, this model can help small company adopt smartwork system because it is light-weight system and cost-effective compared to existing smartwork system. This paper proposes the scenarios of the service models, the roles and incentives of the participants, and the comparative analysis. The superiority of NFC-based smartwork service model is shown by comparing and analyzing the new service models and the existing service models. The service model can expand scope of enterprises and organizations that adopt smartwork and expand the scope of employees that take advantages of smartwork.

• The Journal of Korean Academy of Prosthodontics
• /
• v.52 no.4
• /
• pp.287-297
• /
• 2014

Purpose: The purpose of this study is to examine the impacts of infection control education on dental hygienists' perceptions for hepatitis B and their behaviors. Materials and methods: Study participants were chosen by random selection among dental hygienists working in Seoul, Korea. A total of 150 questionnaires were sent out for the survey from April 2013 to May 2013, of which 140-excluding incomplete responses-were used for the study. Chi-square tests and t-tests were used (SPSS 19.0), and post-hoc analysis was performed as well. The maximum significance level was 0.05. Results: Average 1.53 times infection control education was taken, but dental hygienists' perceptions for hepatitis B and their behaviors did not show statistical differences whether the education was done or not. Practices to prevent infection showed differences depending on categories, especially disinfection and sterilization were well performed by educated group. The most common reasons for not taking the education and noncompliance with infection prevention guidelines are lack of time and opportunity due to busy schedule. Conclusion: 1. The more highly educated, the greater number of patients per day, and the greater size of hospitals, the better infection control education was conducted. 2. Although hepatitis B is one of the most common chronic liver diseases in Korea, no significant correlation between perceptions of hepatitis B and infection control education was found. 3. Dental hygienists who received infection control education performed more efficient practices for protection against infections than those who did not.

• Journal of the korean academy of Pediatric Dentistry
• /
• v.43 no.4
• /
• pp.365-373
• /
• 2016

Composites are the most useful restorative material. However, composites have some disadvantages such as polymerization shrinkage, long working time, and susceptibility to water and contamination, which are stood out more especially when treating children. To solve these problems, bulk-fill composites have been developed. The aim of this study is to compare mechanical properties of bulk-fill and conventional composites. Bulk-fill composites (SureFil SDR flow (SDR), Tetric N-Ceram bulk fill (TBF)) and conventional composites (Filtek Z-350 (Z-350), Unifil Flow (UF), Unifil Loflo Plus (UL)) were used. The Vickers hardness tester was used to measure the microhardness of materials, and Fourier transform infrared spectroscopy was used to measure the degree of conversion. Polymerization shrinkage was measured by using a linometer. Flexural and compressive properties were measured by using the universal testing machine. Data were statistically analyzed by ANOVA and Scheffe's post hoc test. The level of significance was set to p < 0.05. Most conventional composites showed higher microhardness than bulk-fill composites. However, bulk-fill composites showed a higher top/bottom microhardness ratio than conventional composites. Bulk-fill composites showed a higher top/bottom degree of conversion ratio than conventional composites. The polymerization shrinkage was highest in UL and lowest in Z-350. The polymerization shrinkage of flowable composites was higher than that of non flowable composites. The compressive properties were highest in Z-350 and lowest in SDR and UL. In terms of flexural properties, Z-350 was the highest. However, none of the bulk-fill composites exhibited mechanical properties as good as those of conventional composites. Nonetheless, the ratio of microhardness and degree of conversion, which are important properties of bulk filling, were higher in bulk-fill composites. Therefore, the bulk-fill composites might be considered suitable restorative materials in pediatric dentistry.

• Analytical Science and Technology
• /
• v.31 no.4
• /
• pp.161-170
• /
• 2018

The epidemic of disorders associated with synthetic stimulants, such as methamphetamine (MA) and amphetamine (AP), is a health, social, legal, and financial problem. Owing to the high potential of their abuse and addiction, reliable analytical methods are required to detect and identify MA, AP, and their metabolites in biological samples. Thus, a dilute-and-shoot liquid chromatography-tandem mass spectrophotometry (LC-MS/MS) was developed for simultaneous determination of MA, 4-hydroxymethamphetamine (4HMA), AP, and 4-hydroxyamphetamine (4HA) in urine. Urine sample ($100{\mu}L$) was mixed with $50{\mu}L$ of mobile phase consisting of 0.4 % formic acid and methanol and $50{\mu}L$ of working internal-standard solution. Aliquots of $8{\mu}L$ diluted urine was injected into the LC-MS/MS system. For all analytes, chromatographic separation was performed using a C18 reversed-phase column with gradient elution and a total run time of 5 min. The identification and quantification were performed by multiple reaction monitoring (MRM). Linear least-squares regression was conducted to generate a calibration curve, with $1/x^2$ as the weighting factor. The linear ranges were 2.0-200, 1.0-800, and 10-2500 ng/mL for 4HA and 4HMA, AP, and MA, respectively. The inter- and intraday precisions were within 6.6 %, whereas the inter- and intraday accuracies ranged from -14.9 to 11.3 %. The low limits of quantification were 2.0 ng/mL (4HA and 4HMA), 1.0 ng/mL (AP), and 10 ng/mL (MA). The proposed method exhibited satisfactory selectivity, dilution integrity, matrix effect, and stability, which are required for validation. Moreover, the purification efficiency of high-speed centrifugation was clearly higher than 6-15 % for QC samples (n=5), which was higher than that of the membrane-filtration method. The applicability of the proposed method was tested by forensic analysis of urine samples from drug abusers.

• The Journal of Korean Academy of Prosthodontics
• /
• v.33 no.3
• /
• pp.584-609
• /
• 1995

The purpose of this study was to evaluate the difference of the galvanic corrosion behaviour of the titanium in contact with gold alloy, silva-palladium alloy, and nickel-chromium alloy using the immersion and electrochemical method. And the effects of galvallit couples between titanium and the dental alloys were assessed for their usefulness as materials for superstructure. The immersion method was performed by measuring the amount of metal elementsreleased by Inductivey coupled plasma emission spectroscopy(ICPES) The specimen of fifteen titanium plates, the five gold alloy, five silver-palladium, five nickel-chromium plates, and twenty acrylic resin plates ware fabricated, and also the specimen of sixty titanium plugs, the thirty gold alloy, thirty silver-palladium, and nickelc-hromium plugs were made. Thereafter, each plug of gold alloy, silver-palladium, and nickel-chromium inserted into the the titanium and acrylic resin plate, and also titanium plug inserted into the acrylic resin plate. The combination specimens uf galvanic couples immersed in 70m1 artificial saliva solution, and also specimens of four type alloy(that is, titanium, gold, silver-palladium and nickel-chromium alloy) plugs were immersed solely in 70m1 artificial sativa solution. The amount of metal elements released was observed during 21 weeks in the interval of each seven week. The electrochemical method was performed using computer-controlled potentiosta(Autostat 251. Sycopel Sicentific Ltd., U.K). The wax patterns(diameter 11.0mm, thickness,in 1.5mm) of four dental casting alloys were casted by centrifugal method and embedded in self-curing acrylic resin to be about $1.0cm^2$ of exposed surface area. Embedded specimens were polished with silicone carbide paper to #2,000, and ultrasonically cleaned. The working electrode is the specimen of four dental casting alloys, the reference electrode is a saturated calmel electrode(SCE) and the ounter electrode is made of platinum plate. In the artificial saliva solution, the potential scanning was carried out starting from-700mV(SCE) TO +1,000mV(SCE) and the scan rate was 75mV/min. Each polarization curve of alloy was recorded automatically on a logrithmic graphic paper by XY recorder. From the polarization curves of each galvanic couple, corrosion potential and corrosion rates, that is, corrosion density were compared and order of corrosion tendency was determined. From the experiments, the following results were obtained : 1. In the case of immersing titanium, gold alloy, silver-palladium alloy, and nickel-chromium alloysolely in the artificial saliva solution(group 1, 2, 3, and 4), the total amount of metal elements released was that group 4 was greater about 2, 3 times than group 3, and about 7.8 times than group 2. In the case of group 1, the amount of titanium released was not found after 8 week(p<0.001). 2. In the case of galvanic couples of titanium in contact with alloy(group 5, 6), the total amount of metal elements released of group 5 and 6 was less than that of group 7, 8, 9, and 10(p<0.05). 3. In the case of galvanic couples of titanium in contact with silver-palladium alloy(group 7, 8), the total amount of metal elements released of group 7 was greater about twice than that of group 5, and that of group 8 was about 14 times than that of group 6(p<0.05). 4. In the case of galvanic couples of titanium in contact with nickel-chromium alloy(group 9, 10), the total amount of metal elements released of group 9 and 10 was greater about 1.8-3.2 times than that of group 7 and 8, and was greater about 4.3~25 times than that of group 5 and 6(p<0.05). 5. In the effect of galvanic corrosion according to the difference of the area ratio of cathode and anode, the total amount of metal elements released was that group 5 was greater about 4 times than group 6, group 8 was greater about twice than group 7, and group 10 was greater about 1.5 times than group 9(p<0.05). 6. In the effect of galvanic corrosion according to the elasped time during 21 week in the interval of each 7 week, the amount of metal elements released was decreased markedly in the case of galvanic couples of the titanium in contact with gold alloy and silver-palladium alloy but the total amount of nickel and beryllium released was not decreased markedly in the case of galvanic couples of the titanium in contact with nickel-chromium alloy(p<0.05). 7. In the case of galvanic couples of titanium in contact with gold alloy, galvanic current was lower than any other galvanic couple. 8. In the case of galvanic couples of titanium in contact with nickel-chromium alloy, galvanic current was highest among other galvanic couples.

• Sleep Medicine and Psychophysiology
• /
• v.7 no.2
• /
• pp.96-101
• /
• 2000

Objectives: Through comparing sleep variables and autonomic activities among three shifts in shift workers, the authors intended to clarify which shift is most tolerable and to identify the characteristics of their psychological and physical problems. This study is also expected to help shift workers to adapt themselves to their work more effectively. Methods: Fifty one shift workers took part in this study. They were working in a rapidly rotating system in which they worked for 3 days in one shift with one day off between each shift. Based on a sleep diary, sleep latency (SL), sleep period time (SPT), and number of wake after sleep onset (NWASO) were estimated and compared among the three shifts. In assessing sleepiness, Epworth sleepiness scale (ESS) and visual analogue scale (VAS) were used. To evaluate mood states among the three shifts, profile of mood states (POMS) was administered. Heart rate variability (HRV), and the level of adrenaline and noradrenaline were measured to assess autonomic activities. HRV included low frequency power (LF), high frequency power (HF), and LF/HF. Results: SPT was significantly lengthened during the evening shift and SL was shortened during the night shift. The workers showed a drop in alertness at wake-up during morning shift and a drop in alertness at work during night shift. During night shift the subjects complained of physical fatigue and cognitive decline. Comparison of HRV showed that parasympathetic activity was most prominent during the evening shift. Secretion of adrenaline and noradrenaline decreased during the evening shift, though statistically not significant. Conclusion: We found that the evening shift was most tolerable among the three shifts. It is recommended that morning light exposure be done during the morning shift and nocturnal light exposure during the night shift.

• Journal of Korean Society of Forest Science
• /
• v.90 no.2
• /
• pp.197-209
• /
• 2001

TOPMODEL, semi-distributed hydrological model, is frequently applied to predict the amount of discharge, main flow pathways and water quality in a forested catchment, especially in a spatial dimension. TOPMODEL is a kind of conceptual model, not physical one. The main concept of TOPMODEL is constituted by the topographic index and soil transmissivity. Two components can be used for predicting the surface and subsurface contributing area. This study is conducted for the validation of applicability of TOPMODEL at small forested catchments in Korea. The experimental area is located at Gwangneung forest operated by Korea Forest Research Institute, Gyeonggi-do near Seoul metropolitan. Two study catchments in this area have been working since 1979 ; one is the natural mature deciduous forest(22.0 ha) about 80 years old and the other is the planted young coniferous forest(13.6 ha) about 22 years old. The data collected during the two events in July 1995 and June 2000 at the mature deciduous forest and the three events in July 1995 and 1999, August 2000 at the young coniferous forest were used as the observed data set, respectively. The topographic index was calculated using $10m{\times}10m$ resolution raster digital elevation map(DEM). The distribution of the topographic index ranged from 2.6 to 11.1 at the deciduous and 2.7 to 16.0 at the coniferous catchment. The result of the optimization using the forecasting efficiency as the objective function showed that the model parameter, m and the mean catchment value of surface saturated transmissivity, $lnT_0$ had a high sensitivity. The values of the optimized parameters for m and InT_0 were 0.034 and 0.038; 8.672 and 9.475 at the deciduous and 0.031, 0.032 and 0.033; 5.969, 7.129 and 7.575 at the coniferous catchment, respectively. The forecasting efficiencies resulted from the simulation using the optimized parameter were comparatively high ; 0.958 and 0.909 at the deciduous and 0.825, 0.922 and 0.961 at the coniferous catchment. The observed and simulated hyeto-hydrograph shoed that the time of lag to peak coincided well. Though the total runoff and peakflow of some events showed a discrepancy between the observed and simulated output, TOPMODEL could overall predict a hydrologic output at the estimation error less than 10 %. Therefore, TOPMODEL is useful tool for the prediction of runoff at an ungaged forested catchment in Korea.