Objectives: Recent research indicates a potential association between workplace violence and an increased risk of cardiovascular disease (CVD) in the working-age population. However, the relevant evidence in the United States is sparse. Thus, this study was conducted to explore the possible relationship between workplace violence and CVD among United States workers. Methods: We utilized cross-sectional data from the 2015 National Health Interview Survey, which included a representative sample of 18 380 workers, to investigate the associations between workplace violence and the prevalence of CVD using logistic regression. Workplace violence was determined based on self-reported threats, bullying, or harassment at work over the past 12 months, supplemented with additional information regarding frequency. CVD included all forms of heart disease and stroke. Results: A total of 1334 workers reported experiences of workplace violence, and 1336 workers were diagnosed with CVD. After adjustment for covariates, participants who reported any instance of workplace violence had significantly higher odds of having CVD (odds ratio [OR], 1.76; 95% confidence interval [CI], 1.35 to 2.30) than those who reported no such violence. Furthermore, the highest odds of CVD (OR, 1.80; 95% CI, 1.23 to 2.63) were observed among those frequently exposed to workplace violence. Even occasional exposure to workplace violence was associated with 74% excess odds of CVD. Conclusions: Our study indicates an association between workplace violence and CVD in United States workers, exhibiting a dose-response pattern.
To improve the vibration control performance and applicability of traditional particle tuned mass damper (PTMD) and realize the significant characteristic of lightweight design, this study proposes a novel particle tuned mass inerter system (PTMIS) by introducing inerter system (IS) to the PTMD. In the study, the motion equation of single degree of freedom (SDOF) structure attached with PTMIS is established first, then the variation law of the system's vibration reduction performance (VRP) is discussed through parameter analysis, and it is compared with the PTMD to analyze its VRP advantages. Finally, its vibration reduction (VR) mechanism from the perspective of core control force and energy analysis is explored, and its cavity relative displacement from the application perspective is analyzed. The results show that the PTMIS can remarkably improve the vibration control effectiveness of the PTMD. The reason is that the inerter can store energy and transfer the energy to the cavity and particles, which further stimulates the interaction between the two parts, thereby improving the nonlinear energy consumption effectiveness. Also, the IS can amplify the damping element's energy dissipation efficiency. In addition, the PTMIS can effectively reduce the working stroke of the PTMD, and through the analysis of the lightweight characteristics of the PTMIS, it is found that its lightweight advantage can reach nearly 100%.
Kim, Kyungwon;Yun Ahn;Hyunjoo Kang;Kim, Kyung-A;Eunmi Shin;Kim, Hee-Seon;Song, Ok-Young
Journal of Community Nutrition
/
제3권2호
/
pp.110-119
/
2001
This study was designed to assess the needs for nutrition education and educational materials for older adults. Two cross-sectional surreys were conducted. The first survey, conducted by personal interviews, was part of the large-scale elderly nutrition study. Subjects were adults aged 50 and over, recruited from 6 large cities and 8 middle-sized cities(n = 1,850). The second survey, done by mail survey using open-ended questions, was conducted with dietitians working at public health centers or hospitals(n = 53). Adults aged 50 and over were interested in topics such as healthly eating(32.1%), hypertension/stroke and diet(22.1%), osteoporosis and diet(11.4%), and diabetes and diet(9.2%). Television and radio(58.2%), health professionals(12.2%) and friends(7.9%) were common sources of nutrition information. Preferred topics of nutrition education and sources of nutrition information were different by general characteristics of subjects, suggesting that nutrition education or educational materials be planned considering the characteristics of subjects. About 70% of subjects indicated that they sometimes use or do not use nutrition information in daily lives, suggesting the need to provide more practical information. Among 53 facilities responding to the second survey, 73.6% provided nutrition education for older adults. Common topics for nutrition education included diabetes(39.3%), hypertension and stroke(19.1%) and general nutritional management(11.2%). These were consistent to the topics preferred by older adults. As materials In elderly education, dietitians wanted primarily to use leaflets and slides. Boards, booklets and posters were other commonly cited materials. For contents of elderly educational materials, dietitians mentioned the nutritional management for age-related diseases(33.8%), general nutritional management for older adults(25.4%) and practically applicable information(19.7%). They also suggested that nutrition education materials for the elderly should use larger print and attractive pictures, and be easily understood, as well as presenting simple, specific and practical information. These results provide baseline information for developing nutrition education and educational materials for older adults.
The MEMS (Micro Electro Mechanical Systems) process is used in a micro/nano pattern manufacturing method. This method is based on the lithography technology. But the MEMS process has some problems such as complicated process, long processing time and high production costs. Many researchers are doing research in substitute manufacturing method to work out a solution to these problems. In this paper, we apply a dieless incremental forming technology to a substitute method of MEMS process. This dieless forming technology is using in the commercial scale sheet forming such as a prototype of automobile sheet parts. 5-axes CNC (Computerized Numeric Control) method are applied in this system to get a micro-scale dieless forming results. These 5-axes system are composed of precision AC servo motor stages (4-axes) and PZT actuator (1-axis). A PZT actuator is used in a precision actuating axis because it can be operated in the nano scale stroke resolution. This micro dieless incremental forming system has the advantage of minimization in manipulating distance and working space. As equipment and tools become smaller in size, minute inertia force and high natural frequency can be obtained. Therefore, high precision forming performance can be obtained. This allows the factory to quickly provide the customer with goods because the manufacturing system and process are reduced. To construct this micro manufacturing system, many technologies are necessary such as high stiffness frame, high precision actuating part, structural analysis, high precision tools and system control. To achieve the optimal forming quality, the micro dieless forming system is designed and made with high stiffness characteristic.
텔레비전의 가스 스프링은 롱 스트로크 (200 ~ 300mm, TV 상승 변위) 하에서 작동 할 때 피스톤 속도의 제어가 가능하다. 이 원리에 의해서 사용자는 높낮이 조절이 가능하다. 먼저 피스톤의 흐름 해석을 수행하였다. 정확한 관형 단면을 위한 피스톤 속도 조절기술을 조사하였다. 유동률 제어 및 높낮이 작용을 위한 피스톤 구조를 제안되었다. 본 연구는 대형 텔레비전 스탠드를 통해 50 인치 이상 TV의 가스 스프링의 개발을 위한 것이다. 최적 피스톤 로드 제어를 위한 중공축(외경 19.9mm, 내경 13.9mm)에 질소 개스(0.3m/s)를 주입하였다. 그 결과, 유동율이 증대함에 따라 피스톤 로드의 압력강하는 외력의 변화 없이 증대되었다. 결과적으로, 가스스프링을 통한 변위의 제어는 가능하다.
This paper is concerned with the analysis on the surface expansion of AA 2024 and AA 1100 aluminum alloys in backward extrusion process. Due to heavy surface expansion appeared usually in the backward can extrusion process, the tribological conditions along the interface between the material and the punch land are very severe. In the present study, the surface expansion is analyzed especially under various process conditions. The main goal of this study is to investigate the influence of degree of reduction in height, geometries of punch nose, friction and hardening characteristics of different aluminum alloys on the material flow and thus on the surface expansion on the working material. Two different materials are selected for investigation as model materials and they are AA 2024 and AA 1100 aluminum alloys. The geometrical parameters employed in analysis include punch corner radius and punch nose angle. The geometry of punch follows basically the recommendation of ICFG and some variations of punch geometry are adopted to obtain quantitative information on the effect of geometrical parameters on material flow. Extensive simulation has been conducted by applying the rigid-plastic finite element method to the backward can extrusion process under different geometrical, material, and interface conditions. The simulation results are summarized in terms of surface expansion at different reduction in height, deformation patterns including pressure distributions along the interface between workpiece and punch, comparison of surface expansion between two model materials, geometrical and interfacial parametric effects on surface expansion, and load-stroke relationships.
본 논문은 방사성시설에서 원격취급 작업을 위해 사용되는 서보조작기와 같은 장비의 이송을 위해 개발된 텔레스코픽 튜브를 갖는 천정이동장치의 설계에 관해 소개한다. 천정이동장치는 z-방향으로 신장, 수축이 가능한 텔레스코픽 튜브, 전력 및 신호 케이블의 관리를 위한 케이블 시스템, 횡행 움직임과 서보구동부 모듈수납을 위한 트롤리 시스템으로 이루어져 있다. 천정이동장치의 작업환경은 설계에 기하학적인 제약을 주게 되는데, 시설의 높이가 낮고 텔레스코픽 튜브의 수축시 길이가 짧아야하며 스트로크는 커야한다는 요구사항을 갖는다. 텔레스코픽 튜브 어셈블리는 위 제약조건을 만족하도록 비선형계획법을 풀어 최적의 치수를 선정하였다. 텔레스코픽 모션으로 발생하는 케이블 길이의 변화를 수용할 수 있는 케이블 시스템을 소개하였고, 또한 천정이동장치 시스템의 충분한 구동을 위한 서보구동부의 선택지침을 소개하였다.
상지 운동기능 장애인의 재활치료에 대한 지속적인 관심과 훈련의 정량적인 평가가 요구되고 있다. 이러한 문제를 해결하기 위해서 햅틱 장치를 개발했다. 피험자가 햅틱 장치의 손잡이를 움직일 때, 가상의 힘을 제시하여 그들의 동작에 대해 어시스트력이나 항력을 제시할 수 있다. 개발한 상지 운동훈련 프로그램과 시스템의 유효성을 검토하기 위해, 5 명의 운동기능 장애인을 대상으로 직선동작 훈련 프로그램을 수행할 때의 손잡이 위치, 수행 속도, 손잡이의 오차 및 상지의 EMG 신호를 측정하였다. 5 명의 피험자의 손잡이의 궤적 및 EMG 활동이 유사함을 보였다. 이러한 결과는 가상 현실의 힘을 손잡이에 제시함으로써 EMG 활동이 증가하였다고 볼 수 있다. 본 실험의 결과, 객관적이며 정량적인 상지 재활치료 시스템의 개발 및 평가 방법이 시사되었다.
An experimental study is conducted to evaluate and compare the use of BiodieseDI Fuel supplements at blend ratio of 10/90(BDF10) and 20/80(BDF20), in four stroke, direct injection diesel engine located at the authors' laboratory. especially this Biodiesel is produced from Rape oil at the authors' laboratory. The tests are conducted using each of the above fuel blends, in the engine working at a speed of 1800rpm and at a various loads. In each test, specific fuel consumption, exhaust emissions such as nitrogen oxides(NOx), carbon monoxide(CO) and Soot are measured. The results of investigation at various operating conditions are as follows (1) Specific fuel consumption is increased average 1.52%, maximum 1.84% at load 25% in case of BDF10, and average 1.98%, maximum 2.80% at load 25% in case of BDF20. (2) CO emission is decreased average 5.14%, maximum 6.09% at load 0% in case of BDF10, and average 7.75%, maximum 9.13% at load 0% in case of BDF 20. (3) NOx emission is increased average 2.97%, maximum 3.74% at load 0% in case of BDF10, and average 3.84%, maximum 4.67% at load 0% in case of BDF20. (4) Soot emission is decreased average 9.36%, maximum 10.85% at load 75% in case of BDF10, and average 11.99%, maximum 13.95% at load 75% in case of BDF20.
Purpose: This study was performed to evaluate the outcomes of the home care nursing program conducted jointly by thirty two catholic churches and C hospital in Seoul. Method: The subjects included 173 patients who registered for the program during a 4 month-period from November 1, 2004 to February 28, 2005 and received home care services for more than 4 times and 32 professional nurses participating in the program. Using the concept of medical outcome study (MOS), the structure, process, outcome elements were analyzed. Result: 1) A Catholic homecare nursing center and nurses of the C hospital played a central role in providing nursing care, and each church operated its own vehicle from its own office. Home care nurse's job satisfaction was 2.8 out of total score of 4. The major illness was cerebrovascular disease including stroke followed by skeletomuscular disease including degenerative arthritis cancer, and diabetes. Among reasons for accessing the home care nursing program, hypertension management was most prevalent. More than half of the registration was done through catholic churches. Most people who referred the patient to the program was through the church. Most patients received home care nursing 1-2 times a week for 30 to 60 minutes in average and the most frequent type of service provided was basic nursing. 3) The most frequent reason for terminating home care services was death. The change in PPS(Palliative Performance Scale) level from the time of registration and after 4 visits was the same in 45%, decreased in 30%, and improved in 25%. Patient satisfaction was very high, showing 3.4 out of total score of 4. Conclusion: These results proved that the home care nursing program was highly appreciated by subjects and nurses were providing professional care. Thus the two parties involved in the program were actively supporting the program to fulfill their mission. However, several areas needed to be improved such as relating with local community, relating with family doctor, and issue of improving the working conditions for home care nurses.
본 웹사이트에 게시된 이메일 주소가 전자우편 수집 프로그램이나
그 밖의 기술적 장치를 이용하여 무단으로 수집되는 것을 거부하며,
이를 위반시 정보통신망법에 의해 형사 처벌됨을 유념하시기 바랍니다.
[게시일 2004년 10월 1일]
이용약관
제 1 장 총칙
제 1 조 (목적)
이 이용약관은 KoreaScience 홈페이지(이하 “당 사이트”)에서 제공하는 인터넷 서비스(이하 '서비스')의 가입조건 및 이용에 관한 제반 사항과 기타 필요한 사항을 구체적으로 규정함을 목적으로 합니다.
제 2 조 (용어의 정의)
① "이용자"라 함은 당 사이트에 접속하여 이 약관에 따라 당 사이트가 제공하는 서비스를 받는 회원 및 비회원을
말합니다.
② "회원"이라 함은 서비스를 이용하기 위하여 당 사이트에 개인정보를 제공하여 아이디(ID)와 비밀번호를 부여
받은 자를 말합니다.
③ "회원 아이디(ID)"라 함은 회원의 식별 및 서비스 이용을 위하여 자신이 선정한 문자 및 숫자의 조합을
말합니다.
④ "비밀번호(패스워드)"라 함은 회원이 자신의 비밀보호를 위하여 선정한 문자 및 숫자의 조합을 말합니다.
제 3 조 (이용약관의 효력 및 변경)
① 이 약관은 당 사이트에 게시하거나 기타의 방법으로 회원에게 공지함으로써 효력이 발생합니다.
② 당 사이트는 이 약관을 개정할 경우에 적용일자 및 개정사유를 명시하여 현행 약관과 함께 당 사이트의
초기화면에 그 적용일자 7일 이전부터 적용일자 전일까지 공지합니다. 다만, 회원에게 불리하게 약관내용을
변경하는 경우에는 최소한 30일 이상의 사전 유예기간을 두고 공지합니다. 이 경우 당 사이트는 개정 전
내용과 개정 후 내용을 명확하게 비교하여 이용자가 알기 쉽도록 표시합니다.
제 4 조(약관 외 준칙)
① 이 약관은 당 사이트가 제공하는 서비스에 관한 이용안내와 함께 적용됩니다.
② 이 약관에 명시되지 아니한 사항은 관계법령의 규정이 적용됩니다.
제 2 장 이용계약의 체결
제 5 조 (이용계약의 성립 등)
① 이용계약은 이용고객이 당 사이트가 정한 약관에 「동의합니다」를 선택하고, 당 사이트가 정한
온라인신청양식을 작성하여 서비스 이용을 신청한 후, 당 사이트가 이를 승낙함으로써 성립합니다.
② 제1항의 승낙은 당 사이트가 제공하는 과학기술정보검색, 맞춤정보, 서지정보 등 다른 서비스의 이용승낙을
포함합니다.
제 6 조 (회원가입)
서비스를 이용하고자 하는 고객은 당 사이트에서 정한 회원가입양식에 개인정보를 기재하여 가입을 하여야 합니다.
제 7 조 (개인정보의 보호 및 사용)
당 사이트는 관계법령이 정하는 바에 따라 회원 등록정보를 포함한 회원의 개인정보를 보호하기 위해 노력합니다. 회원 개인정보의 보호 및 사용에 대해서는 관련법령 및 당 사이트의 개인정보 보호정책이 적용됩니다.
제 8 조 (이용 신청의 승낙과 제한)
① 당 사이트는 제6조의 규정에 의한 이용신청고객에 대하여 서비스 이용을 승낙합니다.
② 당 사이트는 아래사항에 해당하는 경우에 대해서 승낙하지 아니 합니다.
- 이용계약 신청서의 내용을 허위로 기재한 경우
- 기타 규정한 제반사항을 위반하며 신청하는 경우
제 9 조 (회원 ID 부여 및 변경 등)
① 당 사이트는 이용고객에 대하여 약관에 정하는 바에 따라 자신이 선정한 회원 ID를 부여합니다.
② 회원 ID는 원칙적으로 변경이 불가하며 부득이한 사유로 인하여 변경 하고자 하는 경우에는 해당 ID를
해지하고 재가입해야 합니다.
③ 기타 회원 개인정보 관리 및 변경 등에 관한 사항은 서비스별 안내에 정하는 바에 의합니다.
제 3 장 계약 당사자의 의무
제 10 조 (KISTI의 의무)
① 당 사이트는 이용고객이 희망한 서비스 제공 개시일에 특별한 사정이 없는 한 서비스를 이용할 수 있도록
하여야 합니다.
② 당 사이트는 개인정보 보호를 위해 보안시스템을 구축하며 개인정보 보호정책을 공시하고 준수합니다.
③ 당 사이트는 회원으로부터 제기되는 의견이나 불만이 정당하다고 객관적으로 인정될 경우에는 적절한 절차를
거쳐 즉시 처리하여야 합니다. 다만, 즉시 처리가 곤란한 경우는 회원에게 그 사유와 처리일정을 통보하여야
합니다.
제 11 조 (회원의 의무)
① 이용자는 회원가입 신청 또는 회원정보 변경 시 실명으로 모든 사항을 사실에 근거하여 작성하여야 하며,
허위 또는 타인의 정보를 등록할 경우 일체의 권리를 주장할 수 없습니다.
② 당 사이트가 관계법령 및 개인정보 보호정책에 의거하여 그 책임을 지는 경우를 제외하고 회원에게 부여된
ID의 비밀번호 관리소홀, 부정사용에 의하여 발생하는 모든 결과에 대한 책임은 회원에게 있습니다.
③ 회원은 당 사이트 및 제 3자의 지적 재산권을 침해해서는 안 됩니다.
제 4 장 서비스의 이용
제 12 조 (서비스 이용 시간)
① 서비스 이용은 당 사이트의 업무상 또는 기술상 특별한 지장이 없는 한 연중무휴, 1일 24시간 운영을
원칙으로 합니다. 단, 당 사이트는 시스템 정기점검, 증설 및 교체를 위해 당 사이트가 정한 날이나 시간에
서비스를 일시 중단할 수 있으며, 예정되어 있는 작업으로 인한 서비스 일시중단은 당 사이트 홈페이지를
통해 사전에 공지합니다.
② 당 사이트는 서비스를 특정범위로 분할하여 각 범위별로 이용가능시간을 별도로 지정할 수 있습니다. 다만
이 경우 그 내용을 공지합니다.
제 13 조 (홈페이지 저작권)
① NDSL에서 제공하는 모든 저작물의 저작권은 원저작자에게 있으며, KISTI는 복제/배포/전송권을 확보하고
있습니다.
② NDSL에서 제공하는 콘텐츠를 상업적 및 기타 영리목적으로 복제/배포/전송할 경우 사전에 KISTI의 허락을
받아야 합니다.
③ NDSL에서 제공하는 콘텐츠를 보도, 비평, 교육, 연구 등을 위하여 정당한 범위 안에서 공정한 관행에
합치되게 인용할 수 있습니다.
④ NDSL에서 제공하는 콘텐츠를 무단 복제, 전송, 배포 기타 저작권법에 위반되는 방법으로 이용할 경우
저작권법 제136조에 따라 5년 이하의 징역 또는 5천만 원 이하의 벌금에 처해질 수 있습니다.
제 14 조 (유료서비스)
① 당 사이트 및 협력기관이 정한 유료서비스(원문복사 등)는 별도로 정해진 바에 따르며, 변경사항은 시행 전에
당 사이트 홈페이지를 통하여 회원에게 공지합니다.
② 유료서비스를 이용하려는 회원은 정해진 요금체계에 따라 요금을 납부해야 합니다.
제 5 장 계약 해지 및 이용 제한
제 15 조 (계약 해지)
회원이 이용계약을 해지하고자 하는 때에는 [가입해지] 메뉴를 이용해 직접 해지해야 합니다.
제 16 조 (서비스 이용제한)
① 당 사이트는 회원이 서비스 이용내용에 있어서 본 약관 제 11조 내용을 위반하거나, 다음 각 호에 해당하는
경우 서비스 이용을 제한할 수 있습니다.
- 2년 이상 서비스를 이용한 적이 없는 경우
- 기타 정상적인 서비스 운영에 방해가 될 경우
② 상기 이용제한 규정에 따라 서비스를 이용하는 회원에게 서비스 이용에 대하여 별도 공지 없이 서비스 이용의
일시정지, 이용계약 해지 할 수 있습니다.
제 17 조 (전자우편주소 수집 금지)
회원은 전자우편주소 추출기 등을 이용하여 전자우편주소를 수집 또는 제3자에게 제공할 수 없습니다.
제 6 장 손해배상 및 기타사항
제 18 조 (손해배상)
당 사이트는 무료로 제공되는 서비스와 관련하여 회원에게 어떠한 손해가 발생하더라도 당 사이트가 고의 또는 과실로 인한 손해발생을 제외하고는 이에 대하여 책임을 부담하지 아니합니다.
제 19 조 (관할 법원)
서비스 이용으로 발생한 분쟁에 대해 소송이 제기되는 경우 민사 소송법상의 관할 법원에 제기합니다.
[부 칙]
1. (시행일) 이 약관은 2016년 9월 5일부터 적용되며, 종전 약관은 본 약관으로 대체되며, 개정된 약관의 적용일 이전 가입자도 개정된 약관의 적용을 받습니다.