• 한국정보디스플레이학회:학술대회논문집
• /
• 2008.10a
• /
• pp.1617-1620
• /
• 2008

The effects of the temporal and permanent bright image stickings were examined under variable panel working gas pressure in the 42-in. ac-PDP with a high Xe (11 %) content. In the cells with and without temporal and permanent bright image stickings, the display luminance, firing voltage, and Vt closed curve were measured relative to the working gas pressure. With a decrease in the working gas pressure, the temporal bright image sticking was observed to be reduced, whereas the permanent bright image sticking was observed to be deteriorated.

• Journal of the Korean Society of Industry Convergence
• /
• v.21 no.2
• /
• pp.53-62
• /
• 2018

This study propose a new approach to control the optimal working path of vertical type articulated robot with translation joint for trimming working process automation in forging manufacturing process. The basic structure of the proposed robotic joints controller consists of a Proportional-Intergral controller and a Proportional-Derivative controller in parallel. The proposed control scheme takes advantage of the properties of the fuzzy PID controllers. The proposed method is suitable to control of the trajectory and path control in cartesian space for vertical type articulated robot manipulator. The results illustrates that the proposed fuzzy computed torque controller is more stable and robust than the conventional computed torque controller. The reliability is varified by simulation test for vertical type s articulated robot with seven joints including one trqanslation joint.

• Journal of Korean Society of Occupational and Environmental Hygiene
• /
• v.25 no.2
• /
• pp.236-243
• /
• 2015

Objectives: This study sought to examine the association between long working hours and depressive symptoms among interns and residents in South Korea. Methods: We analyzed a cross-sectional survey of 1,661 interns and residents from the 2014 Korean Interns & Residents Survey. Total working hours during the preceding week was assessed and classified into five categories(i.e. less than 60 hours, 60-79 hours, 80-99 hours, 100-119 hours, and 120-168 hours). Depressive symptoms during the previous week were measured by using ten items from the Center for Epidemiologic Studies Depression Scale questionnaire. Multivariate negative binomial regression was applied to examine the association between long working hours and depressive symptoms after adjusting for potential confounders, including medical specialty and training year. All analyses were performed using STATA/SE version 13.0. Results: 86%(N=1,429) of interns and residents worked 60 hours or more per week. Compared to the "less than 60 hours" group, long working hours for interns and residents were significantly associated with depressive symptoms: "60-79 hours"(PR: 1.56, 95% CI: 1.05, 2.32), "80-99 hours"(PR: 2.27, 95% CI: 1.54, 3.33), "100-119 hours"(PR: 2.62, 95% CI: 1.76, 3.89), and "120-168 hours"(PR: 3.28, 95% CI: 2.21, 4.86). Conclusions: This study found that long working hours were prevalent among interns and residents in South Korea, and it was associated with depressive symptoms.

• Journal of Korean society of Dental Hygiene
• /
• v.18 no.2
• /
• pp.153-164
• /
• 2018

Objectives: The purpose of this study is to analyze the descriptive correlation of the commission intended to provide effective working practices to enhance job satisfaction and organizational engagement by examining the work environment of the dental hygienist. Methods: After the IRB approval, the subjects were dental hygienists working for dental hospitals and clinics in Busan from May 1st to May 31th of 2017. And the final 153 questionnaires were analyzed to SPSS 23.0 for windows, SPSS Inc. Chicago, IL. USA. The data was analyzed using average standard deviation, t-test, one-way ANOVA and multiple regression analysis. Results: The average working environment of the subjects was found to be $3.37{\pm}0.53$ points with the average job satisfaction of the subjects of $3.29{\pm}0.50$ points and the average organizational commitment of the subjects of $3.25{\pm}0.59$ points. As the working conditions of the working environment are higher, it revealed that the higher the working environment, the better the job satisfaction. Conclusions: In conclusion, this study showed that the ability to support managers' abilities, leadership, and dental hygienists is the most influential factor in job satisfaction and organizational involvement. Also, hospital administrators are encouraged to provide excellent work and leadership skills to enhance both the quality of work and that of work ethic.

• The Journal of the Korea Contents Association
• /
• v.19 no.12
• /
• pp.647-659
• /
• 2019

The purpose of this study was to investigate the influence of children's elementary school entrance to working conditions of employed mothers. The data from 4th to 8th wave of Panel Study on Korean Children (PSKC) were used for analysis. Specifically, we examined changes in wages, working hours and regular employment of employed mothers after their children entered elementary schools. We adopted Heck selection model for unbalanced panel data after controlling sample selection bias, and compare results of analysis for unbalanced and balanced panel data. The results showed that children's elementary school entrance reduces employed mothers' wage, working hours and regular employment. These results indicate that mother tend to leave regular job and could not entry into decent job when their children are in elementary school.

• Tribology and Lubricants
• /
• v.27 no.5
• /
• pp.240-248
• /
• 2011

Mechanical face seal installed in primary heat transport pump used for heavy water reactor prevents leakage of working fluid using thin working fluid film between primary seal ring and mating ring. If the leakage of working fluid exceeds the allowable volume, serious accident can be happened by the trouble of primary heat transport pump. The thinner fluid film exists between primary seal ring and mating ring, the less working fluid leaks out. On the other hand, if the thickness of fluid film is not enough, the life of mechanical face seal will be reduced by friction and wear. Therefore appropriate design is necessary to maximize the performance and life of mechanical face seal. In this study, numerical analysis using finite volume method was conducted to investigate the performance of mechanical face seals which have same deep straight groove and 11 different net coning values. As results, equilibrium clearance between primary seal ring and mating ring, leakage volume of working fluid, friction torque on sealing surface and stiffness of working fluid film were obtained. With increasing net coning value, equilibrium clearance and leakage volume increase, and friction torque and stiffness of fluid film decrease.

• Tribology and Lubricants
• /
• v.26 no.4
• /
• pp.230-239
• /
• 2010

Mechanical face seal installed in boiler feedwater pump prevents leakage of working fluid using thin fluid film between stator and rotor. If the leakage of working fluid exceeds the allowable volume, serious malfunction of boiler feedwater pump will be happen. The thinner fluid film exists between stator and rotor, the less working fluid leaks out. However, if the thickness of fluid film is not enough, the wear of seal face will be increased. And it causes the decrease in life of mechanical face seal. Therefore appropriate design is necessary to maximize the performance and life of mechanical face seal. In this study, numerical analysis using finite volume method was conducted to investigate the static characteristics of wavy mechanical face seals which have 4 different wavy surface profiles on rotor. As a result, opening force, leakage volume of working fluid and friction torque were obtained. For the same minimum film thickness, the static characteristics of mechanical face seal were affected by the wavy surface profile which can change the thickness of working fluid film and pressure distribution.

• Human Ecology Research
• /
• v.56 no.4
• /
• pp.361-375
• /
• 2018

This study recognizes the changes of the father's role and the importance of family mealtimes as well as examines the individual, family and social contexts surrounding the father's family mealtime. This study analyzed the trend of the father's family mealtime frequency and factors affecting them in order to explore the current conditions of their father's work and family balance through family mealtimes. Data from 492 fathers who have school aged children were collected through an online survey. The overall trend of the frequency of father's family meals showed an average of 2.4 breakfasts and an average of 3.2 dinners per week. The frequency of the father's family meals showed statistically significant differences according to the father's age, children's school age, dual income, weekly working hours, working flexibility, leaving on-time and the priority of work and family. The analysis of hierarchical linear regressions was conducted to determine factors affecting the frequency of father's family mealtime to show that the frequency of father's family mealtime was best explained by father's working conditions and perception variables. Working conditions such as working hours, leaving work on time, working flexibility were significant variables in regards to the father's family mealtime frequency. The father's perception towards parental efficacy, wife's support, and work-family priority were significant factors in regards to the father's family mealtime frequency. This study is meaningful in that it provides basic data on policy making for the compatibility of the father's work and family.

• Journal of Fisheries and Marine Sciences Education
• /
• v.14 no.2
• /
• pp.229-248
• /
• 2002

The primary objective of this study is to firstly survey and analyze the working environment and actual condition, secondly know their problems, and then provide the basic data about how to improve their working conditions. The specific study items for getting the goal above is as follows: 1. How does the industrial company connect with highschool vocational education well? 2. How does the mechanical technical highschool graduate apply with industrial field? The result of study is as follows: 1. In case of employment's information and the industrial educationed cooperation, the workers who has the working history in less than 5 years takes short to find the job. National high school graduates and those who get the job through the school and the teacher changed their job at short period compared to other. 2. There was no benefit about the same major's worker at industrial field. The workers admitted that there is the exemption fo military service and the certification's allowance, only for which is related to their job. The longer the workers stay their job, the more they had the chance to get the exemption of military service. National highschool were carried out the curriculum well as planed especially for their major subjects. Whereas, the public and private highschools weren't. The seniors of their job and the coworkers are very helpful for learning the actual knowledge. The workers said that the school's curriculum and club activity weren't effective applying with their working field. 3. The study says that the important things of their job is the knowledge of their major. Those who 80% answered that the worker must improve the knowledge of their major to be a good engineer. Learning from their senior in working field was very helpful. The question above was ranked as the first. 4. The answer says that the new changed job's pay is more than the previous job. That is, the reason of leaving the job is the pay gap. The most dissatisfaction and problems in present job was the environment of working and the working condition. 5. Regarding to asking next year's plan, the answer says that keeping the job was ranked as the first. That answer means that they conservative.

• Korean Journal of Agricultural Science
• /
• v.38 no.1
• /
• pp.101-108
• /
• 2011

In forest work, working conditions are very hard to improve. The proper distribution of work time and good posture is believed to bring about direct improvements such as accident prevention. On this, this study has analyzed forest workers' posture and their working hours in order to improve their working conditions in stone channel work. Authors has chosen several core elements of stone channel work to focus on, which include stone masonry, excavation of bed, moving stone, directing work, choosing stone, and breaking stone. The ratio of real working time over total working time was shown as 84.6%. As for the time ratio of each elemental work over the real working time, the stone masonry was 60.4%, the directing work was 15.1%, moving stone was 12.1%, choosing stone was 7.1%, breaking stone was 3.3%, and excavation of bed was 2.0%. According to the analytical results provided by OWAS, the ratio of category III (Work posture has a distinctly harmful effect on the musculoskeletal system) has shown that moving stone turned out 65.2%, choosing stone was 61.5%, stone masonry was 46.1%, breaking stone was 14.3%, excavation of bed was 12.5% and directing work was 6.8%. Furthermore, the ratio of category IV (Work posture with an extremely harmful effect on the musculoskeletal system) has shown that excavation of bed turned out 37.5%, breaking stone was 28.6%, stone masonry was 27.3%, choosing stone was 7.7%, moving stone was 6.1% and directing working was 4.5%. These results are expected to be utilized for the improvement with respect to both working methods in the stone channel work and the workers' working posture.