• 교육녹색환경연구
• /
• 제6권1호
• /
• pp.49-59
• /
• 2007

The purpose of this study is to propose the type and size of space which is changed working plan as comparison with basic plan. It has been compared basic plan with working plan of 12 educational facilities which was designed basic plan by a professional research organization of educational facilities. The results of this study are summarized as follows; 1) The gross area of elementary school is decreased a course of working plan. But, the meddle and high school's gross area is increased. 2) It was downed 69.28 percent by the area of classroom at the primary school. At the meddle school, 3rd classroom's area increased by 22.65 percent, while 4th classroom's area down 33.98 percent. In case of high school, the area of 4th classroom and public lecture room increased by each 28.23 and 23.17 percent.

• Journal of Biosystems Engineering
• /
• 제20권1호
• /
• pp.36-46
• /
• 1995

The number of possible working days is one of the major factors for estimating the coverage area of a combine harvester. The percentages of possible working days at 24 locations were presented by analyzing the amount of rainfall during the working periods of rice harvesting from the end of September to the end of October for past 20 years. The percentages of possible working days ranged from 75% to 85% in most cases.

• 대한산업공학회지
• /
• 제2권1호
• /
• pp.61-78
• /
• 1976

The purpose of this study is to establish the horizontal and vertical working area which is dependent on measuring value of workers, body in order to make easy and stable working environments, and then to design the size of machines, tools and instruments in production factory because of making the practical production conditions which is the most suitable to human characteristics. But there is necessity that we have to review numeric value of measurement periodically because the size of workers' body is variable according to periodic and social circumstances. The establishment of standard working area after measurement enable us to make the best working conditions and we can design standard working table, optimum size of all machines and tools in production activity. Therefore, we can also acknowledge the importance of studying on human engineering because human engineering is necessary to reduction of fatigue in working, saving workers from industrial accidents, fail-safe system, improvement of productivity with increase in efficiency and etc. Finally, this study informs us that numeric value of measurement is larger than that of Japan, but not than that of America and Germany. So we can establish standard working area which is the most suitable for Korean inherence after measurement of detailed parts for workers' body.

• 한국실내디자인학회논문집
• /
• 제32호
• /
• pp.64-71
• /
• 2002

Today, term of ‘industrial society’means the totally changing society by new technical innovation through the Industrial Revolution begun in England at the mid-nineteenth century and it made social structure centering agricultural culture change with industrial culture with expansion of goods by the massive production. Information working area has to bo a space not just for improving business efficiency in industrial society but for developing efficiency in working in harmony with the information and structural aspects based on computer and communication technology. There are two kinds of environmental elements of working space : the tangible ones are the area and the structure of working space, lights, network, layout and information machines in office, the intangible ones are a feeling of satisfaction of management and arrangement of office information machines capability of information delivery, common ownership of documents and their files, the security and connection between office workers, and harmony. According to the wave of information begun from the late twentieth century, structural layout of working area has become various by the working type through network of new developed information communication machines. But it is hard to apply them in actually.

• 가정과삶의질연구
• /
• 제14권2호
• /
• pp.127-138
• /
• 1996

The purpose of this study is to show farm women's stress under productive activity role multiple overload through family characteristic (pattern and number) and characteristic(type working time and involvement proportion) of productive activity. The outline of the study is as follow; 1. Stress by pattern and number of a family is highest in a four generation family and increases according as the number of the family increases. 2. The characteristic of productive activity : 1) Stress based on type of productive activity is highest in Type III of the most multiple overload roles. 2) in light of stress based working time area of household task activity is in inverse proportion to working time but area of farming and wage earning activity are approximately in direct proportion to it. The two-way ANOVA analysis show that stress in Type I of area of household task increases but in Type IV it decreases as working time increases 3) In stress based on involvement proportion to it. The wo-way ANOVA analysis show that stress in Type I of area of household task increases but in Type IV it decreases as working time increases. 3) In stress based on involvement proportion in three as working time increases 3). In stress based on involvement proportion in three activity areas the more the involvement proportion the less of the stress : an inverse ratio.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2005년도 ICCAS
• /
• pp.1651-1656
• /
• 2005

This paper describes a natural frequency analysis conducted to find out a suitable working area for a spring-manipulator system generating a large vibrating force with mechanical resonance. Large force generation is one of the functions that we hope for a robot. For example, a weeding robot is required to generate a large force, because some weeds have roots spreading deeply and tightly. The spring-manipulator system has a spring element as an end-effector, so it can be in a state of resonance with the elasticity of the spring element and the inertial characteristics of the manipulator. A force generation method utilizing the mechanical resonance has potential to produce a large force that cannot be realized by a static method. A method for calculating a natural frequency of a spring-manipulator system with the generalized inertia tensor is proposed. Then the suitable working area for the spring-manipulator system is identified based on a natural frequency analysis. If a spring-manipulator system operates in the suitable working area, it can sustain mechanical resonance and generate a large vibrating force. Moreover, it is shown that adding a mass at the tip of the manipulator expands the suitable working area.

• 의료ㆍ복지 건축 : 한국의료복지건축학회 논문집
• /
• 제25권2호
• /
• pp.7-16
• /
• 2019

Purpose: The courtyard in the ward can light and ventilate in the central space and corridor of the ward. It is possible to improve the disadvantages of the existing double-corridor ward. Also, there is the advantage in that patients are able to contact with nature indoors and cause positive activities. So, the purpose of this study is quantitatively analyze the floor area and the average distance of nurse working of the courtyard in ward. Methods: The subjects are converted through the same criteria setting. And it investigate and analyze the influence of the courtyard in the ward through the analysis of the spatial composition. Result: The factors that affected the floor area increase are the planning courtyard, the corridor type and the dispersion of the medical rooms. The average distance of nurse working is more influenced by the nursing management system of the hospital than by the courtyard. So, It can improve according to the position and number of nurse station. Implications: It can be used as a primary data for courtyard plan in the ward for positive patient environment plan considering the floor area, average distance of nurse working.

• Journal of Biosystems Engineering
• /
• 제40권3호
• /
• pp.178-185
• /
• 2015

Purpose: This research suggests a method of establishing criteria for working area and operating cost for a long-term lease of agricultural machinery. Methods: Eight crops were selected-three food crops and five open-field vegetables-and agricultural machines used for sowing, transplanting, and cultivation in dry-field farming were analyzed. Results: The break-even acreage for agricultural machinery under a long-term lease was found to differ by agricultural machine, ranging from 1.0 to 5.8 ha. In terms of arable land area, the break-even acreages for harvesting machinery and transplanters were 15.6 to 26.1 ha and 6.1 to 8.6 ha, respectively. The working area lessees should secure was divided into two cases: (1) 2.0 to 11.6 ha when leasing individual agricultural machines (sowing and transplanting) for a long-term period, and (2) more than 10 ha when farmers who cultivate beans, potatoes, garlic, onions, and so on lease sowing and transplanting machines as a set. When agricultural machinery was leased for a long term, the operating cost and working time were reduced by 27.6 to 74.4% and 2.5 to 21.6%, respectively, indicating considerable effect. Conclusions: A long-term lease project needs to be promoted to overcome the limitation of short-term leases of agricultural machinery. The local government should lead this project and facilitate the mechanization of dry-field farming. The department in charge of agricultural machinery lease projects needs to set the working area to cover the rate and maintenance cost for farmers who lease agricultural machinery for the long term.

• 한국산학기술학회:학술대회논문집
• /
• 한국산학기술학회 2010년도 춘계학술발표논문집 2부
• /
• pp.910-914
• /
• 2010

A collision between a barge and an oil tanker of Hebei Spirit caused the release of an estimated 12,547 tons of light crude oil into the Yellow Sea off the west coast of Taean-gun, Korea on December 7, 2007. This study was aimed to evaluate exposure conditions and acute health effects in soldiers participating in the Hebei Spirit oil spill cleanup activities and the association between these and the nature of the work and use of protection devices. The sample comprised 2,624 soldiers stratified by working area and number of working days. We divided working area into the coast of Taean-gun(highly polluted area) and other areas affected by Hebei Spirit oil spill. And we divided number of working days into 1-7 days, 8-14 days, 15-21 days and above 22 days. Data were obtained via a structured, self-administered questionnaire and included information on working area, type of working, number of working days, use of protective materials, and acute health effects. Acute health effects were classified into 5 groups: neurological, respiratory, dermatologic, ophthalmic and other symptoms. Data analysis was performed using unconditional logistic regression used to compute odds ratios and 95% confidence intervals. On logistic regression analysis, working on the coast of Taean-gun was significantly associated with increased risk of acute health problems: headache, dizziness, nausea, general fatigue, insomnia, flushed face, sore throat, dry throat, runny nose, cough, sputum, skin irritation, sore eyes, injection of conjunctiva, tear, and low back pain. Furthermore soldiers working more than 21 days were significantly associated with increased risk of acute health problems: insomnia, flushed face, sore throat, runny nose, cough, sputum, tear, low back pain and fever. Accordingly, the exposure to the oil and the subsequent cleanup efforts were suggested to inflict acute health problems on soldiers participating in the Hebei Spirit oil spill cleanup activities.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2014년도 제46회 동계 정기학술대회 초록집
• /
• pp.346.1-346.1
• /
• 2014

Porous nano crystalline $TiO_2$ is currently used as a working electrode in a dye-sensitized solar cell (DSSC). The conventional working electrode is comprised of absorption layer (particle size:~20 nm) and scattering layer (particle size:~300 nm). We inserted window layer with 10 nm particle size in order to increase transmittance and specific surface area of $TiO_2$. The electrochemical impedance spectroscope analysis was conducted to analysis characterization of the electronic behavior. The Bode phase plot and Nyquist plot were interpreted to confirm the internal resistance caused by the insertion of window layer and carrier lifetime. The photocurrent that occurred in working electrode, which is caused by rise in specific surface area, increased. Accordingly, it was found that insertion of window layer in the working electrode lead to not only effectively transmitting the light, but also increasing of specific surface area. Therefore, it was concluded that insertion of window layer contributes to high conversion efficiency of DSSCs.