• 제목/요약/키워드: working

검색결과 19,007건 처리시간 0.05초

How effective has the Wairau River erodible embankment been in removing sediment from the Lower Wairau River?

  • Kyle, Christensen
    • 한국수자원학회:학술대회논문집
    • /
    • 한국수자원학회 2015년도 학술발표회
    • /
    • pp.237-237
    • /
    • 2015
  • The district of Marlborough has had more than its share of river management projects over the past 150 years, each one uniquely affecting the geomorphology and flood hazard of the Wairau Plains. A major early project was to block the Opawa distributary channel at Conders Bend. The Opawa distributary channel took a third and more of Wairau River floodwaters and was a major increasing threat to Blenheim. The blocking of the Opawa required the Wairau and Lower Wairau rivers to carry greater flood flows more often. Consequently the Lower Wairau River was breaking out of its stopbanks approximately every seven years. The idea of diverting flood waters at Tuamarina by providing a direct diversion to the sea through the beach ridges was conceptualised back around the 1920s however, limits on resources and machinery meant the mission of excavating this diversion didn't become feasible until the 1960s. In 1964 a 10 m wide pilot channel was cut from the sea to Tuamarina with an initial capacity of $700m^3/s$. It was expected that floods would eventually scour this 'Wairau Diversion' to its design channel width of 150 m. This did take many more years than initially thought but after approximately 50 years with a little mechanical assistance the Wairau Diversion reached an adequate capacity. Using the power of the river to erode the channel out to its design width and depth was a brilliant idea that saved many thousands of dollars in construction costs and it is somewhat ironic that it is that very same concept that is now being used to deal with the aggradation problem that the Wairau Diversion has caused. The introduction of the Wairau Diversion did provide some flood relief to the lower reaches of the river but unfortunately as the Diversion channel was eroding and enlarging the Lower Wairau River was aggrading and reducing in capacity due to its inability to pass its sediment load with reduced flood flows. It is estimated that approximately $2,000,000m^3$ of sediment was deposited on the bed of the Lower Wairau River in the time between the Diversion's introduction in 1964 and 2010, raising the Lower Wairau's bed upwards of 1.5m in some locations. A numerical morphological model (MIKE-11 ST) was used to assess a number of options which led to the decision and resource consent to construct an erodible (fuse plug) bank at the head of the Wairau Diversion to divert more frequent scouring-flows ($+400m^3/s$)down the Lower Wairau River. Full control gates were ruled out on the grounds of expense. The initial construction of the erodible bank followed in late 2009 with the bank's level at the fuse location set to overtop and begin washing out at a combined Wairau flow of $1,400m^3/s$ which avoids berm flooding in the Lower Wairau. In the three years since the erodible bank was first constructed the Wairau River has sustained 14 events with recorded flows at Tuamarina above $1,000m^3/s$ and three of events in excess of $2,500m^3/s$. These freshes and floods have resulted in washout and rebuild of the erodible bank eight times with a combined rebuild expenditure of $80,000. Marlborough District Council's Rivers & Drainage Department maintains a regular monitoring program for the bed of the Lower Wairau River, which consists of recurrently surveying a series of standard cross sections and estimating the mean bed level (MBL) at each section as well as an overall MBL change over time. A survey was carried out just prior to the installation of the erodible bank and another survey was carried out earlier this year. The results from this latest survey show for the first time since construction of the Wairau Diversion the Lower Wairau River is enlarging. It is estimated that the entire bed of the Lower Wairau has eroded down by an overall average of 60 mm since the introduction of the erodible bank which equates to a total volume of $260,000m^3$. At a cost of $$0.30/m^3$ this represents excellent value compared to mechanical dredging which would likely be in excess of $$10/m^3$. This confirms that the idea of using the river to enlarge the channel is again working for the Wairau River system and that in time nature's "excavator" will provide a channel capacity that will continue to meet design requirements.

  • PDF

선주의 책임제한과 책임보험의 보상 간의 상호관계: Realice호 사건에서 캐나다 대법원 판결을 중심으로 (Interrelationship between the Shipowner's Limitation of Liability and the Coverage of Liability Insurance: Focus on the Judgment of the Supreme Court of Canada in the Realice Case)

  • 이원정
    • 한국항만경제학회지
    • /
    • 제31권2호
    • /
    • pp.41-53
    • /
    • 2015
  • Paracomon Inc. v. Telus Communication사건('Realice호 사건')에서 Realice호의 닻이 항해과정에서 해저광섬유케이블에 얽히는 사고가 발생하자, 선주사의 대표이사이자 선장은 사용 중인 케이블을 절단해 버렸다. 케이블 소유회사는 선주에게 수리비를 청구하였고, 선주는 케이블 소유회사의 청구액을 책임보험자에게 청구하였다. 그런데 캐나다 대법원은, 선주는 1976년 해사채권에 대한 책임제한에 관한 조약('1976년 책임제한조약')에 따라 케이블 소유회사에 대한 손해배상책임을 일정 한도로 제한할 수 있으나, 케이블을 절단한 선주의 비행은 1993년 캐나다 해상보험법(Canada Marine Insurance Act)상 보험자의 면책사유인 피보험자의 고의적 불법행위(wilful misconduct)에 해당되어 책임보험자에게 보험금을 청구할 수 없다고 판결하였다. 결국 이번 판결로 선주는, 케이블소유회사에 대한 책임제한권은 인정받았으나, 책임보험자에 대한 보험금청구권은 상실하게 되었다. Realice호 사건은 국제조약상 선주에게 인정되는 책임제한과 그에 대한 책임보험의 보상 간의 상호 관계를 최초로 다루고 있다는 점에서 우리에게 시사하는 바가 크다. 따라서 본 논문의 목적은 Realice호 사건에서 대법원의 판결 이유를 분석하고, 해운 보험업계 이해와 지금까지 확립된 해상법에 기초하여 판결의 정당성을 평가하는데 있다. 본 논문은 1976년 책임제한조약의 입법 연혁을 고려할 때 선주가 책임제한권을 갖는다는 대법원의 판결은 타당하지만, 해운 및 보험업계의 이해, 제3자의 직접청구권의 도입취지, 책임제한 배제사유의 입법 과정 등을 고려할 때 책임보험자가 면책된다는 대법원의 판결은 적절하지 않다는 결론을 내린다. 끝으로, 본 논문은 이번 대법원 판결에 기초하여 2014년 세월호 사건에서 선주의 책임제한과 책임보험자의 보상 문제를 검토한다.

Recent research activities on hybrid rocket in Japan

  • Harunori, Nagata
    • 한국추진공학회:학술대회논문집
    • /
    • 한국추진공학회 2011년도 제36회 춘계학술대회논문집
    • /
    • pp.1-2
    • /
    • 2011
  • Hybrid rockets have lately attracted attention as a strong candidate of small, low cost, safe and reliable launch vehicles. A significant topic is that the first commercially sponsored space ship, SpaceShipOne vehicle chose a hybrid rocket. The main factors for the choice were safety of operation, system cost, quick turnaround, and thrust termination. In Japan, five universities including Hokkaido University and three private companies organized "Hybrid Rocket Research Group" from 1998 to 2002. Their main purpose was to downsize the cost and scale of rocket experiments. In 2002, UNISEC (University Space Engineering Consortium) and HASTIC (Hokkaido Aerospace Science and Technology Incubation Center) took over the educational and R&D rocket activities respectively and the research group dissolved. In 2008, JAXA/ISAS and eleven universities formed "Hybrid Rocket Research Working Group" as a subcommittee of the Steering Committee for Space Engineering in ISAS. Their goal is to demonstrate technical feasibility of lowcost and high frequency launches of nano/micro satellites into sun-synchronous orbits. Hybrid rockets use a combination of solid and liquid propellants. Usually the fuel is in a solid phase. A serious problem of hybrid rockets is the low regression rate of the solid fuel. In single port hybrids the low regression rate below 1 mm/s causes large L/D exceeding a hundred and small fuel loading ratio falling below 0.3. Multi-port hybrids are a typical solution to solve this problem. However, this solution is not the mainstream in Japan. Another approach is to use high regression rate fuels. For example, a fuel regression rate of 4 mm/s decreases L/D to around 10 and increases the loading ratio to around 0.75. Liquefying fuels such as paraffins are strong candidates for high regression fuels and subject of active research in Japan too. Nakagawa et al. in Tokai University employed EVA (Ethylene Vinyl Acetate) to modify viscosity of paraffin based fuels and investigated the effect of viscosity on regression rates. Wada et al. in Akita University employed LTP (Low melting ThermoPlastic) as another candidate of liquefying fuels and demonstrated high regression rates comparable to paraffin fuels. Hori et al. in JAXA/ISAS employed glycidylazide-poly(ethylene glycol) (GAP-PEG) copolymers as high regression rate fuels and modified the combustion characteristics by changing the PEG mixing ratio. Regression rate improvement by changing internal ballistics is another stream of research. The author proposed a new fuel configuration named "CAMUI" in 1998. CAMUI comes from an abbreviation of "cascaded multistage impinging-jet" meaning the distinctive flow field. A CAMUI type fuel grain consists of several cylindrical fuel blocks with two ports in axial direction. The port alignment shifts 90 degrees with each other to make jets out of ports impinge on the upstream end face of the downstream fuel block, resulting in intense heat transfer to the fuel. Yuasa et al. in Tokyo Metropolitan University employed swirling injection method and improved regression rates more than three times higher. However, regression rate distribution along the axis is not uniform due to the decay of the swirl strength. Aso et al. in Kyushu University employed multi-swirl injection to solve this problem. Combinations of swirling injection and paraffin based fuel have been tried and some results show very high regression rates exceeding ten times of conventional one. High fuel regression rates by new fuel, new internal ballistics, or combination of them require faster fuel-oxidizer mixing to maintain combustion efficiency. Nakagawa et al. succeeded to improve combustion efficiency of a paraffin-based fuel from 77% to 96% by a baffle plate. Another effective approach some researchers are trying is to use an aft-chamber to increase residence time. Better understanding of the new flow fields is necessary to reveal basic mechanisms of regression enhancement. Yuasa et al. visualized the combustion field in a swirling injection type motor. Nakagawa et al. observed boundary layer combustion of wax-based fuels. To understand detailed flow structures in swirling flow type hybrids, Sawada et al. (Tohoku Univ.), Teramoto et al. (Univ. of Tokyo), Shimada et al. (ISAS), and Tsuboi et al. (Kyushu Inst. Tech.) are trying to simulate the flow field numerically. Main challenges are turbulent reaction, stiffness due to low Mach number flow, fuel regression model, and other non-steady phenomena. Oshima et al. in Hokkaido University simulated CAMUI type flow fields and discussed correspondence relation between regression distribution of a burning surface and the vortex structure over the surface.

  • PDF

인구동태신고 및 통계조사의 개선방안 (A Study on Improvement of Vital Registration and Statistics System in Korea)

  • 신윤재
    • 한국인구학
    • /
    • 제11권1호
    • /
    • pp.58-75
    • /
    • 1988
  • 1.Objectives of the Study It is a well known fact that a prompt and reliable data on demographic information is essential in a proper planning and evaluation of any program of national or community level. Especially vital statistics are an important demographic component among demographic information. Realizing the importance of vital statistics, the government has made some efforts for years to improve the vital registration system which has a close relationship with the production of vital statistics. However, it is still observed that there are some limitations in utilizing vital registration data due to considerable amount of vital events which are never registered and registered but not in time or inaccurately, even though vital registration system in Korea has sound legal basis. In this connection, the objectives of the study is as follows :(1) To examine some problems of the vital registration system in various aspects, (2) To make improvement programme of continuous Demographic Survey as a supplementary source of vital statistics, and (3) To find out some alternatives for making it possible to produce and utilize the reliable vital statistics by developing analytical methodologies on that. 2. Current Situation of Vital Registration System All the vital events, i.e. births, deaths, marriages and divorces, are to be registered in time under the Civil Registration Law, Statistics Law and Regulation on Vital Statstics as a duty of people. Some recent tendencies in each of recent registration are summarized as below: (1) The completeness of vital registration .Out of all births which are occurred during a year, around 75% of those compared to the estimates are registered in the year of occurrence. .In case of death registration, the percentage of registration in the year of occurrene has been gradually increased from 86.2% in the year of 1980, but it is still below the level of 90% compared to the estimates. .The percentage of registration for marriages and divorces in the year of occurrence out of total registered numbers was revealed to be 69% and 73% respectively in 1985. (2) Continuous Demographic Survey .It is a kind of sample survey for the purpose of producing reliable vital statistics which could not be provided by the vital registration. .It covers about 17, 000 sample households at national level and important information for vital events are collected in every month by 323 expertized enumerators who are regular staff of the government. .Although the result of the survey seems to be more reliable than of vital registration, the reliability of the data is still bellow the acceptable level if compared with relevant information from other sources such as population census or special surveys. 3. Problems of Vital Registration System There are four major obstacles in improving vital registration system in Korea; (1) In general, policy priority is not given on any programme of improving vital registration system. It is, therefore, very difficult to formulate comprehensive programme through having cooperation from related authorities and sufficient financial assistance. (2) In all the laws related and system itself, there is substantial degree of overlap and irrationality. Registration of each vital event is maintained according to several laws and regulation such as Civil Registration Law, Statistics Law, Resident Registration Law and Regulation on Vital Statistics. However they are mutually overlapped and overall supervision can not be done systematically due to lack of co-operation among the authorities concerned. (3) The administration of vital registration system seems to be working inefficiently, because of most of civil servants who are in charge of vital registration are lacking of conception on vital statistics and also there is a certain extent of regidity in handling the works. Therefore, they are doing their jobs in a passive way. (4) A substantial proportion of vital events occurred is not registered within the legal time limit (i.e. within one month after the occurrence in case of birth and death) or not registered forever. Some of social customs and superstitution seem to be the potential causes especially in case of births and deaths. 4. Recommendations for the Improvement of Vital Statistics (1) Reporting systems such as civil registration, vital statistics and resident registration should be integrated under the single law. Also, administrative supervision, personnel and budget with regard to the registration system should be under the control of a single ministry. (2) It is necessary to simplify the procedures and methods of reporting vital events, i.e., reducing number of sheets of the form, making corrections easily, reducing registration items, etc. (3) Continuous Demographic Survey as a supplementary source of vital registration should be improved and special ad-hoc surveys should be conducted wth regular interval. (4) In-depth analysis should be done using various sources of data on vital statistics. 5. Concluding Remarks From this study, we can notice that temporary campaign and motivation programs are not sufficient to improve the quality of vital statistics. Strong intentions and continuous efforts of the government are needed for the improvement of the vital registration system. Furthermore, most of the data collected through the registration are not properly analyzed and utilized, partly due to the lack of appreciation among high-level governmental officials of the need for vital statistics. It is, therefore, requested that long-term improvement programs of vital statistics be implemented with policy priority and continuous efforts be given to this purpose as a long-term goal of development in Korea.

  • PDF

오염토양의 효과적 현장조사에 대한 주요 방법론의 검토 (Key Methodologies to Effective Site-specific Accessment in Contaminated Soils : A Review)

  • 정덕영
    • 한국토양비료학회지
    • /
    • 제32권4호
    • /
    • pp.383-397
    • /
    • 1999
  • 오염토양을 효과적으로 진단하고 경제적인 복원을 위해서는 오염토양의 오염원인, 오염정도, 주변 환경이나 인축에 대한 피해발생 유무, 오염물의 이동경로 등을 올바르게 평가하는 것이 대단히 중요하다. 이를 위해서는 오염토양과 토양내 가스, 주변 지하수 및 지표수, 침전물 등의 효율적 시료채취와 정확한 분석이 필수적이라 할 수 있다. 오염지역 토양의 오염도평가를 표준화하고 처리효율성을 높이기 위해서는 전문처리요원이 토양의 오염도와 위험성을 정확하게 판단 할 수 있도록 단순하면서도 경제적인 연속시험법을 필요로 한다. 이것은 오염토양의 조사와 복원시간 및 전치적일 기술의 진보를 가져오는데 상당한 시간절약을 꾀할 수 있다. 특히 효과적인 현장평가를 위해서는 오염특성을 포함한 많은 관련 요인들에 대한 표준화된 기준하에서 오염의 형태와 정도를 결정하는 것이 중요하다. 현장평가를 위한 일반적인 절차는 작업계획과 토양조사수준에 따라 Phase I, II, III의 단계적 방법으로 구성되어 있다. Phase I은 토양의 과거용도 및 오염물의 유입경로를 기초로 하여 현장의 환경여건을 파악하는 단계이다. Phase I에서 잠재적 오염물질에 의해 오염된 것이 확인되면 Phase II에서는 오염물의 존재여부와 존재정도를 파악하는 단계로 시료의 채취 및 분석과정이 여기에 포함된다. Phase III는 Phase I과 II의 결과를 바탕으로 오염토양을 복원하는 단계이다. 여기서 평가기준이 지역 특이적인 것인지 적당한 것인지를 결정하는 중요한 요인은 (1) 시료채취의 공간분포도와 지역의 크기, (2) 취해진 시료의 수, (3) 시료채취 방법, 그리고 (4) 자료를 분석요령 등이다. 선택된 분석방법이 추천할만한 것일지라도 정량방법의 선택여부는 현장조사방법에 대한 훈련이나 조사경험을 가진 사용자에 의해 결정되는 것이 바람직할 것이다.

  • PDF

배추 재배에 있어 경운방법에 따른 작업효율성 및 토양유실 특성 평가 (Application of Reduce Tillage with a Strip Tiller and its Effect on Soil Erosion Reduction in Chinese Cabbage Cultivation)

  • 이정태;이계준;류종수;황선웅;박석호;장용선;정영상
    • 한국토양비료학회지
    • /
    • 제44권6호
    • /
    • pp.970-976
    • /
    • 2011
  • 고랭지 배추 재배지역은 대부분 산지를 개간하여 조성한 경사 밭으로 작물이 재배되는 여름철 집중강우에 의해 많은 량의 토양이 유실된다. 특히 경사 밭 전면경운에 의한 토양교란은 작물이 아직 어린시기에 쏟아지는 강우에 직접 노출되는 경우가 많아 토양 유실 위험이 가중되고 있다. 본 연구는 경사 밭 적용 가능한 부분 경운 작업기 개발 및 개발된 작업기의 토양유실 저감 가능성, 농작업의 효율성, 작물 생산성 등을 평가하여 경사 밭 토양 보전을 위한 기초 자료로 활용 하고자 하였다. 부분 경운 작업기는 4조식으로 폭 10 cm, 깊이 10 cm 트렉터 부착형 농기계로 작물이 심겨지는 최소 부분만 (경운율 16.7%) 시비 동시 경운되도록 제작되었다. 제작된 부분 경운 작업기는 기존 관행 경운 대비 59% 작업 노력을 경감하고, 농기계 작업으로 소모되는 연료비도 74% 절감할 수 있는 것으로 평가되었다. 경운 방법에 따른 배추의 생육 특성은 정식 후 40일 생육조사 결과 ha기준 관행 24톤 대비, 부분경운 42톤으로 초기 생육량이 증가하는 경향을 보였다. 이와 같은 결과는 수확기 수량에도 영향을 주어 ha기준 관행 경운은 43톤인데 반해, 부분 경운은 67톤으로 증수되는 결과를 보였다. 부분 경운은 관행 경운에 의한 고랭지 배추 재배에 비해 유거수 및 토양 유실 경감 효과도 매우 높은 것으로 평가되었다. 특히 호밀 예취 피복 후 부분 경운에 의한 고랭지 배추 재배는 토양 유실 위험이 매우 높은 시기인 배추 생육 초기에 관행 대비 유거수 유출량은 67%, 토양 유실량은 89% 저감할 수 있는 것으로 평가되었다. 고랭지 배추 재배지의 지형적 특성과 기후조건을 고려해 볼 때, 관행 경운에 따른 토양 유실 위험에 대한 근본 대책 없이는 농업의 지속성을 유지하기가 매우 어려울 것으로 판단된다. 본 연구 결과 배추가 심겨지는 최소 부분만 경운, 미경운 부분을 호밀 잔재물로 피복할 경우 토양유실 경감 효과가 매우 높을 것으로 평가되었다. 특히 관행 경운 대비 작업 노력을 줄이면서 비료이용 효율도 높일 수 있어 에너지 절감에도 크게 기여할 수 있을 것으로 기대된다.

미드라쉬의 성서교수학적 함의와 적용 (Biblical Didactical Implications and Applications of Midrash)

  • 김인혜;고원석
    • 기독교교육논총
    • /
    • 제67권
    • /
    • pp.45-75
    • /
    • 2021
  • 본 논문은 시대적 상황 속에서 성서교육에 대한 새 패러다임을 모색하며 유대 성서해석의 옛 전통인 미드라쉬로 시선을 돌린다. 이는 오늘의 상황 속에서 현재의 성서교육이 의미 있고 효과적인 교육이 되기 위한 준거틀을 삼고자 함이다. 유대 랍비들은 성경을 대할 때 특정한 해석지침을 가지고 있었는데, 이러한 해석지침은 미드라쉬와 함께 전수되었으며, 성경을 해석하는 태도를 형성하였다. 미드라쉬는 문집이나 강론 모음집, 랍비 문학의 특정 장르, 공개적으로 전달되는 성경 주석과 설교, 그리고 성경의 특정 책에 대한 주석 행위 등을 포함하는 상당히 넓은 의미지평을 가지고 있다. 랍비들의 미드라쉬 해석지침은 성경이 들음과 배움의 자세를 요청하고 탐구의 자세를 갖게 한다는 것, 여백을 통한 탐구를 하고자 하며 상호존중과 상호소통의 중요성을 알게 하고, 오늘 나에게 도전하는 말씀이라는 성서교수학적 의미를 발견하게 한다. 한편 미드라쉬를 성서교수학적으로 적용한 비블리오드라마는 미드라쉬의 해석지침과 많은 공유점을 갖고 있다. 비블리오드라마는 성경과 참여자의 대면을 통해 서로 인격적인 만남과 성찰을 일으킴으로써 서로를 새로운 모습으로 발견하는 기회를 제공한다. 그리하여 비블리오드라마는 성경의 내용을 바르게 이해하고 인식하는데 그치는 것이 아니라 그 이해와 인식을 바탕으로 참여자의 삶에 도전하고 새로운 관점으로 참여자 자신의 삶을 돌아보게 함으로써 새로운 정체성 형성을 도모한다.

선박의 담당업무에 따른 소음노출레벨 측정에 관한 연구 (Noise Exposure Level Measurements for Different Job Categories on Ships)

  • 임명환;최상범
    • 해양환경안전학회지
    • /
    • 제27권6호
    • /
    • pp.875-882
    • /
    • 2021
  • 통상적으로 직업소음에 의한 청력손실을 최소화하기 위해서는 작업자가 8시간 동안 85 dBA 이상 소음에 노출되지 않도록 권고하고 있다. 이번 연구에서는 실습선박에서 7종류의 담당업무별 작업자들의 소음노출레벨을 측정하였다. 항해 중, 24시간 동안 작업자의 위치하는 A특성등가소음레벨(LAeq,i)과 소음장소의 지속기간(h) 및 소음기여도(Lex,24h,i)를 고려한 소음노출레벨(Lex,24h)을 측정하였다. 그 결과, 갑판사관 그룹 Lex,24h=56.1 dB, 갑판부원 그룹은 Lex,24h=58.9 dB, 실습항해사들은 Lex,24h=62.0 dB, 취사부원들은 Lex,24h=64.3 dB, 실습기관사그룹은 Lex,24h=91.1 dB, 기관사관 그룹은 Lex,24h=91.1 dB, 그리고 기관부원 그룹은 Lex,24h=95.1 dB를 나타내고 있다. 따라서 기관 업무를 담당하는 기관사들, 기관부원들 그리고 기관실습생들은 반드시 청력보호구를 착용해야함을 알 수 있었다. 소음이 심한 기관실에서 청력보호구를 착용한다면 기관사관그룹은 Lex,24h=23.1 dB, 기관부원그룹은 Lex,24h=24.4 dB 그리고 기관실습생들은 Lex,24h=21.5 dB의 소음노출레벨을 줄일 수 있을 것으로 추정된다. 또한 실습생들의 거주구역인 제2 강의실 겸 식당구역에 바닥시공을 64 mm, A-60-class 뜬바닥 구조로 개선했다면 실습항해사들의 소음노출도는 Lex,24h=4.3 dB, 실습기관사들은 Lex,24h=1.8 dB 정도 추가적인 감소가 있었을 것이다.

공간능력에 대한 신경과학적 모델 개발 및 빛과 그림자 문제 해결 과정에의 적용 (Development of Neuropsychological Model for Spatial Ability and Application to Light & Shadow Problem Solving Process)

  • 신정윤;양일호;박상우
    • 한국과학교육학회지
    • /
    • 제41권5호
    • /
    • pp.371-390
    • /
    • 2021
  • 이 연구의 목적은 공간능력 구성요소에 대한 신경과학적 모델을 개발하고, 빛과 그림자 관련 과학 과제를 해결하는 과정에서의 두뇌 활성 영역을 신경과학적 모델에 기반하여 영역 일반적 능력과 영역특수적 능력으로 구분하여 설명하는 것이다. 이를 위해 남자 대학생 24명이 공간능력 검사지 문항과 빛과 그림자 과제를 해결하는 동안의 시선이동과 EEG를 동기화하여 측정하였으며, 과제 해결 전략에 대한 사후면담과 RVP를 실시하였다. 시선 이동, 두뇌 활성 영역, 참여자의 사고 과정과 전략을 통합하여 공간능력 구성요소에 대한 신경과학적 모델을 개발하고, 빛과 그림자 관련 과제 해결 과정을 분석하였다. 연구의 결과는 다음과 같다. 첫째, 공간 시각화와 심적 회전 요소는 주로 두정엽의 활성을 필요로 했으며, 공간 방향화 요소는 전두엽의 활성을 필요로 했다. 구체적으로, 공간 시각화 요소는 문제를 탐색하는 과정에서 전두엽이 활성화되었고, 문제와 답지를 비교하는 과정에서 측두엽과 두정엽이 활성화되었다. 심적 회전 요소는 회전된 정보를 탐색하는 구간에서는 전두엽이, 심적 회전을 할 때에는 두정엽이, 문제와 답지를 비교하는 구간에서는 측두엽이 활성화되었다. 공간 방향화 요소는 문제를 탐색하는 과정과 문제와 답지를 비교하는 과정 모두 전두엽이 활성화되었다. 둘째, 빛과 그림자 과제를 해결 할 때에는 영역 일반적 기능인 공간 능력과 과학적 원리를 적용하는 영역 특수적 사고가 함께 필요하였다. 평행광의 그림자 모양 추론과 빛의 방향이 바뀔 때의 그림자 모양을 추론에서의 두뇌 활성 패턴은 공간 시각화 요소에 대한 신경과학적 모델과 유사하였다. 여러 방향에서의 그림자를 통해 원래 물체를 추론할 때에는 공간 방향화 요소, 점광원의 그림자 모양을 추론할 때에는 공간 시각화 요소에 대한 신경과학적 모델과 두뇌 활성 패턴이 유사하였다. 빛과 그림자 과제를 해결할 때 추가적으로 활성화 된 부위는 주로 연역적 추론, 작업 기억, 행동에 대한 계획 기능을 담당하는 중측두이랑, 중심앞이랑, 하전두이랑, 중전두이랑이었다. 따라서 빛과 그림자 과제를 해결하는 과정에서는 공간능력 외에도 그림자 생성 원리를 기반으로 한 연역적 추론, 빛의 진행 방향을 작업 기억에 유지시키는 것, 광원의 특징에 따른 과제 해결 과정 계획, 빛-물체-스크린의 공간적 관계 인지 등이 추가적으로 필요하다.

방사선사 직무수행을 위한 방사선사 단독법 제정에 대한 요구도 (Demand for the Radiological Technologist Independent Act for the Performance of the Duties of a Radiological Technologist)

  • 김은혜;임청환;임우택;주영철;홍동희;정홍량;문영주;김훈;정영진;최지원;윤용수;조평곤;박명환;양오남;정봉재
    • 대한방사선기술학회지:방사선기술과학
    • /
    • 제44권5호
    • /
    • pp.525-534
    • /
    • 2021
  • In order to provide high-quality medical services to the public and contribute to the improvement of public health, it is necessary to enact an independent law according to the work of radiological technologists. Therefore, this study intends to review the regulations related to radiographers in the Medical Service Technologists, etc. Act. and to present opinions and directions for enactment of individual laws for radiological technologists. An online survey was conducted to 15,000 radiological technologists working in medical institutions and education sites in Korea; 1,027 people (6.85%) responded. The questionnaire consisted of 3 questions on demographic characteristics, 5 questions on the scope of work, and 12 questions on the revision of the Medical Service Technologists, etc. Act. and the establishment of the Radiological Technologist Independent Act. Reliability and factor analysis were performed on 9 questions measured on a Likert 5-point scale in "Revision of the Medical Service Technologists, etc. Act. and the establishment of the Radiological echnologist Independent Act" among the questionnaire items. Reliability for the total 9 questions was Chronbach α=0.728. There was a high perception that the regulations related to radiological technologists were insufficient in the current Medical Service Technologists, etc. Act., and the perception that examinations performed by radiological technologists at medical institutions were included in medical practice was high. If the Radiological Technologist Independent Act is enforced, a high percentage of respondents said that they could receive legal protection through the institutionalization of the scope of work, that the status of radiological technologists would be improved, and the scope of work would be expanded. The response that the scope of work of radiological technologists should be included was the highest at 96.6%. In the analysis according to demographic characteristics, it was found that 96.7% of the respondents were agreed regardless of the factors. Radiological technologists will have to work hard to secure the public health by coping with new radiology devices, procedures and treatment methods. Therefore, as the results of this study, it is expected that the enactment and implementation of the Radiological Technologist Independent Act will contribute to the improvement of the quality of treatment for patients and to the public health.