• Journal of Preventive Medicine and Public Health
• /
• v.17 no.1
• /
• pp.65-73
• /
• 1984

To assess the status of industrial injuries, a large scale textile company located around Taegu city was selected. And it was investigated from January 1981 to December 1982. After the department for workers safety was established, frequency rate of injury was 9.70 in 1981 and 4.15 in 1982, incidence rate per 1,000 workers was 27.11 in 1981 and 12.96 in 1982, and then, intensity rate was 0.33 in 1981 and 0.01 in 1982. The average duration of working loss was 36.64 days in 1981 and 3.34 in 1982. The incidence rate per 100 workers was 2.3 in annual average, 2.7 in men and 2.0 in women. The monthly incidence rate per 1,000 workers was highest as 3.6 in June; daily incidence rate, lowest as 1.8 on Sunday; and the highest as 14.7 from 10 to 12 o'clock in a day. The frequency by injured parts of body was highest as 42.3% on finger and 14.4% on the other part of hand, and the lower extremities as 14.4% followed. According to the kind of injuries, the laceration was the highest as 46.1%, the next was contusion as 15.4%, and the third was superficial injuries as 6.7%, According to the cause of injuries, the machinery accidents showed the highest as 47.1% and the accidents due to hand tool followed as 16.3%. By underlying cause of injuries, the environmental factors were 13.5% and the human factors 86.5%. The psychologic factors among human factors were the most common as 60.6%.

• Journal of Environmental Health Sciences
• /
• v.33 no.6
• /
• pp.506-512
• /
• 2007

This study was conducted to describe the exposure levels of welding fumes by the type of manufacturers, work process, welding type and the size of manufacturers, and to find out the trend of chronological changes of airborne welding fume levels. The subjects of this study were 509 manufacturers, consisting of 11 types of manufacturers, 3 work processes, 7 welding types, in Busan from January, 1997 to December, 2005. Airborne concentration of welding fume was determined by manual of National Institute for Occupational Safety and Health (NIOSH), and the data were analyzed by using SPSS 10.0 for Windows program. The mean concentration of airborne welding fume in all manufacturers was $1.29\;mg/m^3$ (Range: $0.01{\sim}3.00\;mg/m^3)$. The level of welding fume was the highest, as $1.96\;mg/m^3$, for manufactures of motor vehicles, trailers and semi-trailers, which was lower than $5.0\;mg/m^3$ of 8 hr-TWA in Korean permissible exposure limit for welding fume. There was a significant difference in the mean levels of welding fumes by work process, showing the highest in welding workshop ($1.39\;mg/m^3$), followed by pipeline welding workshop ($1.26\;mg/m^3$) and engineering workshop ($1.20\;mg/m^3$). Among welding types, the mean level of welding fume was the highest in the type of $CO_2$ & arc welding, as $1.46\;mg/m^3$, followed by $CO_2$ welding ($1.40\;mg/m^3$), shielded metal arc welding ($1.31\;mg/m^3$), spot welding ($1.27\;mg/m^3$), and so on. The highest mean level of welding fume was $1.58\;mg/m^3$ in work process of pipe line welding workshop for the manufacturers of basic iron and steel, and $2.27\;mg/m^3$ in the type of arc welding for the manufactures building ship and boats. By the size of manufacturers, the mean concentration of welding fume for manufactures in small scale with less than 50 workers was the highest as $1.45\;mg/m^3$ (Range: $0.07{\sim}3.00\;mg/m^3)$. The mean level of welding fume was the highest as $1.39\;mg/m^3$ both in 1997 and in 2005, showing a trend of fluctuating periodically within a range of $1.10{\sim}1.39\;mg/m^3$. The above results suggested that more effective control program for work environment producing welding fumes should be developed and applied since there were significant variations in welding fume levels by the type of manufacturers, work processes, welding types, the size of manufactures, and by year.

• Journal of Bio-Environment Control
• /
• v.31 no.2
• /
• pp.79-89
• /
• 2022

With the wide use of greenhouses, the working hours have been increasing inside the greenhouse for workers. In the closed ventilated greenhouse, the internal environment has less affected to external weather during making a suitable temperature for crop growth. Greenhouse workers are exposed to organic dust including soil dust, pollen, pesticide residues, microorganisms during tillage process, soil grading, fertilizing, and harvesting operations. Therefore, the health status and working environment exposed to workers should be considered inside the greenhouse. It is necessary to secure basic data on particulate matter (PM) concentrations in order to set up dust reduction and health safety plans. To understand the PM concentration of working environment in greenhouse, the PM concnentrations were monitored in the cut-rose and Hallabong greenhouses in terms of PM size, working type, and working period. Compare to no-work (move) period, a significant increase in PM concentration was found during tillage operation in Hallabong greenhouse by 4.94 times on TSP (total suspended particle), 2.71 times on PM-10 (particle size of 10 ㎛ or larger), and 1.53 times on PM-2.5, respectively. During pruning operation in cut-rose greenhouse, TSP concentration was 7.4 times higher and PM-10 concentration was 3.2 times higher than during no-work period. As a result of analysis of PM contribution ratio by particle sizes, it was shown that PM-10 constitute the largest percentage. There was a significant difference in the PM concentration between work and no-work periods, and the concentration of PM during work was significant higher (p < 0.001). It was found that workers were generally exposed to a high level of dust concentration from 2.5 ㎛ to 35.15 ㎛ during tillage operation.

• Korean Journal of Clinical Laboratory Science
• /
• v.50 no.1
• /
• pp.71-76
• /
• 2018

This study examined the status of the laboratory biosafety of researchers in Korea during 03 Jan 2017~25 Mar 2017. Questionnaires were given out to 500 researchers working with pathogens in the laboratory of universities and institutes. According to the results, the respondents showed a high level of awareness but not compliance on the overall biosafety rules and regulations. Regarding the Biosafety facility level, 279 (55.8%) of respondents answered "know" and 221 (44.2%) of respondents answered "no". Despite the insufficient safety equipment and biosafety plans, researchers believed that appropriate safety measures could protect the workers and that their laboratories are safe. In a study involving biosafety education, 80% of the researchers had been trained in laboratory safety and 20% had never received safety education. The need for biosafety education was 66% and the satisfaction rate of education was 46%. These results suggest that the researchers already had experience in biosafety training, but they believed that continuing education is necessary. In addition, there were opinions that the most important thing to improve the biosafety status is to strengthen the training program and education system. In conclusion, it is necessary to develop a better training system for laboratory biosafety regarding the exposure risks.

• Journal of dental hygiene science
• /
• v.5 no.2
• /
• pp.83-88
• /
• 2005

In spite of relatively low level of radiation dose used at dental clinics, long term exposure may be harmful, so radiation workers at dental clinics must be well aware of its danger. This study was radiation safety management by dental hygienists in order to take preventive measures for dental hygienists and suggest ideas to develop radiation safety training programs. For this, we contacted dental hygienists working at the local dental clinics for 4 months from December of 2003 to march of 2004 and obtained the following findings. 1. Regarding the intraoral radiographic method, the average daily photographing frequency of standard films stood at one to five pieces (47.5%), and the average weekly photographing frequency of digital radiation medicine stood at less than one piece (69.8%), and the average weekly photographing frequency of bitewing films stood at less than one piece (67.7%), and and the average weekly photographing frequency of occlusal films stood at less than one piece (95.5%), and the dentistries whose average weekly photographing frequency of pediatric films stood at one to five pieces accounted for 47.1 percent. 2. Regarding the extraoral radiographic method, the average weekly photographing frequency of panorama film stood at one to five pieces (63.7%), and less than one piece (20.9%), the average weekly photographing frequency of cephalometric film stood at less than one piece (72.3%), and one to five pieces (20.1%). 3. Concerning the radiation safety management training program, only 18.7% of total 278 surveyed attended the training progra., Attendance tendency of the training program by general characteristics showed statistically significant difference according to age (p<0.01), working experience (p<0.001), and marital status (p<0.01). 4. When asked about the protective equipments against radiation exposure, 40.6% of them said "modest", and 71.1% appeared equipped with led apron as a protective tool.

• Journal of radiological science and technology
• /
• v.36 no.3
• /
• pp.209-217
• /
• 2013

Adiponectin (AdipoN), brain-derived nerotrophic factor (BDNF) and leptin (LeP) are mainly secreted from adipose tissue and are known to be involved in regulation of the development of obese. However, there are not many studies on the association between abdominal fat and neuropeptides such as AdipoN, BDNF and LeP. The aim of this study was undertaken to investigate the association between abdominal fat thickness, neuropeptides and cardiovascular disease (CVD) risk factors. The participants in the study were 138 male employees without CVD. This study was approved by the Institutional Review Board of Occupational Safety and Health Research Institute. Written informed consent for the participants in this study was obtained from all individuals. We obtained subcutaneous fat thickness (SFT) and visceral fat thickness (VFT) by using ultrasonography and neuropeptides levels were measured with ELISA kit according to the method suggested by kit manufacturer. The mean SFT and VFT were $1.58{\pm}0.51$ and $4.52{\pm}1.44$ cm. The mean concentrations of AdipoN, BDNF and LeP were $3.14{\pm}3.52$ ng/ml, $24.11{\pm}8.52$ pg/ml and $4.27{\pm}2.38$ ng/ml, respectively. VFT were positively correlated with total cholesterol (r=0.217, p<0.05), LDL-cholesterol (r=0.271, p<0.01), triglyceride (r=0.233, p<0.05) and insulin (r=0.338, p<0.01), but was inversely correlated with HDL-cholesterol (r=-420, p<0.01). AdipoN levels were positively correlated with HDL-cholesterol (r=0.220, p<0.05) and were inversely correlated with total cholesterol (r=-0.196, p<0.05), LDL-cholesterol (r=-0.190, p<0.05), triglyceride (r=-0.199, p<0.05), SFT (r=-0.195, p<0.05) and VFT (r=-0.412, p<0.01). However, LeP levels showed a reverse trend to AdipoN. AdipoN level was significantly higher in non-obese participants (BMI<25 kg/m), but LeP concentration was significantly higher in obese participants (BMI>25 kg/m) than in non-obese. On multiple logistic regression analysis, obese were significantly associated with AdipoN (odds ratio=0.784) and LeP (odds ratio=1.494). These results suggested that AdipoN and LeP concentrations are affected abdominal fat and that dysfunction and/or declination in the production and secretion of neuropeptides might induced ultimately obese and CVD.

• Journal of Korean Society of Occupational and Environmental Hygiene
• /
• v.24 no.4
• /
• pp.509-517
• /
• 2014

Objectives: This study was conducted to investigate the patterns of exposure of welders to strong magnetic fields for extended periods of time on the basis of their daily activities as recorded in a logbook. Methods: Male workers whose main job is welding, specifically seven welders occupied with gas tungsten arc welding(GTAW), two performing shielded metal arc welding(SMAW), and ten engaged in gas metal arc welding(GMAW), were measured in terms of the degree to which they were exposed to extremely low frequency(ELF) magnetic fields over 24 hours by using an electromagnetic field meter(EMF meter), as well as based on a daily activity log. Results: The welders were exposed to $1.25{\pm}4.95{\mu}T$ of magnetic field per day on average. For those who spent more than half a day-735.26 minutes, or 51.1% of the day-at work, the figure averages $3.88{\pm}8.85{\mu}T$ with a maximum value of $221.28{\mu}T$. The subject welders spent $338.14{\pm}154.95$ minutes per day at home. During their stays at home, they were exposed to an average of $0.17{\pm}0.06{\mu}T$ with a maximum value of $3.50{\mu}T$. The maximum exposure of $221.28{\mu}T$ occurred when welders performed GMAW. The average exposure reached its highest at $17.71{\pm}6.96{\mu}T$ when conducting SMAW. Magnetic field exposure also depends upon posture: welders who sat while welding were exposed five times more than those who stood during work, and this difference is statistically significant. As for the relationship between distance from the welding power supply and maximum magnetic field exposure, maximum magnetic field exposure decreases as the distance increases. The average magnetic field exposure, in the meantime, showed no significant difference depending on distance. Conclusions: The following were observed through this study: 1) welders, while conducting jobs, are exposed to magnetic fields not only from the welding machine, but also from the surrounding base material due to the current flowing between the welding machine and base material, meaning that they are continuously exposed to a magnetic field; and 2) welders are more exposed to magnetic fields while they sit at a job compared to when they stand up.

• Journal of radiological science and technology
• /
• v.38 no.3
• /
• pp.277-286
• /
• 2015

Diagnostic radiation devices that is used in the country has reached to 78,000 units. When used for human subjects diagnostic purposes, it is subject to Medical Service Act, when used in diagnostic purposes in animal subjects, the subject to Veterinarians Act. When used for other purposes are subject to the Nuclear Safety Act. Even the same radiation devices varies the legislation that is applied depending on the intended use and object. Diversified been p rovisions a re necessary compared to t he analysis o f l egal content in o rder t o prevent confusion of the legislation is a matter to be applied. It is a qualitative study that Nuclear Safety Act, Medical Service Act and Veterinarians Act administrative procedures for the introduction of the applied diagnostic radiation devices, safety inspection, human resources management, area management and the content related to administrative punishment. The Nuclear Safety Act sub-provisions, the introduction of diagnostic radiation generating devices, there are many complex and complete requirements administrative procedures on the concept of a permit. Inspection of safety associated with the use, would be subject to periodic inspection auditing characteristics over the entire field of radiation safety management. It must receive court regular education for the safety administrator and workers. Unlike the reference of the radiation dose rate to specify the radiation controlled area there is a measurement obligation of radiation dose rate. Unlike the reference of the radiation dose rate to specify the radiation controlled area there is a measurement obligation of radiation dose rate. Quantitative difference of administrative punishment that is imposed when legislation violation has reached up to 10 times, over the entire field, the largest burden of radiation safety management at the time of application of the Nuclear Safety Act sub provisions. And it is applied differently depending on the purpose and the imaging target using the same diagnostic radiation devices. Depending on the use mainly under the current legal system, radiation can be lacking in fairness of the contents of the legislation for safety management, there is a risk of confusion. Alternatives such as centralized and standardization of legislation by diagnostic radiation devices use is expected to be necessary.

• Annals of Occupational and Environmental Medicine
• /
• v.34
• /
• pp.40.1-40.9
• /
• 2022

Background: According to the occupational accident status analysis in 2020, of 1,180 occupational deaths, 463 were caused by cardiovascular disease (CVD). Workers should be assessed for CVD risk at regular intervals to prevent work-related CVD in accordance with the rules on occupational safety and health standards. However, no previous study has addressed risk and mortality. Therefore, this longitudinal study was conducted to evaluate the relationship between 10-year cardiovascular risk of the general health checkup and mortality. Methods: The study included 545,859 participants who visited Kangbuk Samsung Total Healthcare Centers from January 1, 2002, to December 31, 2017. We performed 10-year cardiovascular risk assessment for the participants and the risk was divided into 4 groups (low, moderate, high, and very high). The study used death data from the Korea National Statistical Office for survival status as an outcome variable by December 31, 2019, and the cause of death based on the International Classification of Diseases, 10^th Revision (ICD-10) was identified. Statistical analysis was performed using Cox proportional hazards regression analysis, and the sum of the periods from the first visit to the date of death or December 31, 2019, was used as a time scale. We also performed a stratified analysis for age at baseline and sex. Results: During 5,253,627.9 person-years, 4,738 overall deaths and 654 cardiovascular deaths occurred. When the low-risk group was set as a reference, in the multivariable-adjusted model, the hazard ratios (HRs) (95% confidence interval [CI]) for overall mortality were 3.36 (2.87-3.95) in the moderate-risk group, 11.08 (9.27-13.25) in the high-risk group, and 21.20 (17.42-25.79) in the very-high-risk group, all of which were statistically significant. In cardiovascular deaths, the difference according to the risk classification was more pronounced. The HRs (95% CI) were 8.57 (4.95-14.83), 38.95 (21.77-69.69), and 78.81 (42.62-145.71) in each group. As a result of a subgroup analysis by age and sex, the HRs of all-cause mortality and cardiovascular mortality tended to be higher in the high-risk group. Conclusions: This large-scale longitudinal study confirmed that the risk of death increases with the 10-year cardiovascular risk of general health checkup.

• Journal of Korean Society of Occupational and Environmental Hygiene
• /
• v.11 no.1
• /
• pp.56-69
• /
• 2001

Objectives : This study was designed to develop and standardize a checklist for ergonomic risk factors, and to provide ergonomic guidelines for managing cumulative trauma disorders (CTDs) in automobile assembly lines. Methods : The Checklist for Ergonomic Risk Factors (CERF-1) was developed based on the results of previous studies, and then modified after performing pilot study. Information on the symptoms possibly related with CTDs was obtained using a self-reported Questionnaire from 465 automobile assembly workers. Their job conditions were examined to assess risk factors through both direct observation and video analysis. Results : Rate of detecting risky job through CERF-1 was 85.6%, and was similar to that (88.8%) by Occupational Safety and Health Adminstration(OSHA) checklist but higher than that (63.7%) by American National Standards Institute(ANSI) Z-365. Relationship of the exposure scores derived from CERF-1 with levels of symptom was greater (r=0.49) than OSHA (r=0.28) and ANSI Z-365 (r=0.22). Considering the relationship, jobs scoring higher than 16 could be classified as the Risk Job. and lower than 16 as the Low Risk Job. Sensitivity and specificity of the Risk Job were 92.5 % and 31.5 %, respectively. Odds ratio (OR) after age adjustment was 5.69 (95 % confidence interval 3.15-10.29) for the Risk Job, and these ORs were significantly different from those of the Low Risk Job. The exposure scores were Quite valid, in that the scores at the main survey were significantly correlated with those at the follow-up survey, as suggested by test-retest(r=0.88) and inter-rater reliability(r=0.80). Conclusions : The CERF-1, developed in this study, will be an efficient tool for evaluation of risk jobs for CTDs in automobile assembly lines, and can be used easily by health care providers.