• The Bulletin of The Korean Astronomical Society
• /
• v.36 no.2
• /
• pp.147.1-147.1
• /
• 2011

We investigate the chemical differentiation in F, G, K type stars with and without planets to extend the work by Kang et al. (2011) to various spectral types. Since the primordial chemical composition has been preserved in the stellar atmosphere, stellar metallicity can provide the information on the primordial material, which is the potential building block of planets. Therefore, we can explore the favored conditions for planet formation through the comparison of chemical compositions between planet-host stars (PHSs) and stars without planets. In this work, we analyze 19 F, G, and K type stars. In each spectrum, we measure equivalent widths (EWs) of Fe, Na, Mg, Al, Si, Ca, Sc, Ti, V, Cr, Mn, Co, and Ni using TAME (Tools for Automatic Measurement of Equivalent width). The abundances of these species can be derived with the measured EWs and MOOG code (Sneden 1973). Like results by precedent studies, we find that planet-host stars have abundances higher than stars without planets. The typical difference in the abundances of Na, Mn, Co and Ni is $0.4{\pm}0.2dex$. In addition, as found in Kang et al. (2011), Mn is the most different element between PHSs and comparison stars.

• Korean Institute of Interior Design Journal
• /
• v.15 no.2 s.55
• /
• pp.37-47
• /
• 2006

The purpose of this study was to provide basic data for better design of Pharmacy after introducing the new system of separation of dispensing from prescribing medicine. To analyze characteristics of interior design in pharmacy and to measure worker satisfaction, a survey was conducted with 255 workers who serve at any Pharmacies located in Busan, Korea. For data analysis, descriptive statistics, t-test, One-way ANOV A were performed with the SPSS Win program(Ver. 10.0). The major findings were as follows: 1) As a result of analyzing the role and functions of the pharmacist is to be classified into many items such as entrance, a waiting room, a dispensary, a medication & consultation area, a drug storage and a worker's room. 2) Natural substances should be used more widely instead of using chemical substances for the pharmacy interior design as finishing materials 3) Pharmacy worker's satisfaction with dispensary is specially low among the total satisfaction which is :slightly higher than the average. 4) The degree of satisfaction between pharmacy workers from different groups varied depending on work hours, and especially long time(over 10hrs) workers showed dissatisfaction. Pharmacy managers need to consider the option of expanding convenience facilities. 5) According to the satisfaction analysis for each pharmacy conditions, the group who worked in 30-pyeong spaces were most satisfied. Since the 30-pyeong space is most standardized space research should be conducted.

• Korean Journal of Construction Engineering and Management
• /
• v.24 no.4
• /
• pp.60-73
• /
• 2023

The need for adopting automation technologies to improve inefficiencies in interior finishing modeling work is increasing during the Building Information Modeling (BIM) design stage. As a result, the use of visual programming languages (VPL) for practical applications is growing. However, undefined or incorrect space designations in BIM models can hinder the development of automated finishing modeling processes, resulting in erroneous corrections and rework. To address this challenge, this study first developed a rule-based automated interior finishing detailing module for floors, walls, and ceilings. In addition, an automated space integrity checking module with 86.69% ACC using the Multi-Layer Perceptron (MLP) model was developed. These modules were integrated into a design automation module for interior finishing, which was then verified for practical utility. The results showed that the automation module reduced the time required for modeling and integrity checking by 97.6% compared to manual work, confirming its utility in assisting BIM model development for interior finishing works.

• Journal of Digital Convergence
• /
• v.9 no.4
• /
• pp.191-200
• /
• 2011

Smart work is a new paradigm of the way of working for knowledge workers. We propose a model which determines the levels of smart work. As the determinants, we identify freedom from both space and time. As an extension of the model by adding a new determinant of the mobilization of social intelligence, we show that a new smart work model, smart work 2.0, can be derived. For successful implementation of smart work 2.0, we also provide strategic suggestions, along with the implication of the study and future research direction.

• Journal of Families and Better Life
• /
• v.24 no.5 s.83
• /
• pp.89-99
• /
• 2006

The purpose of this study was to devise guidelines for the kitchen workspace of the aged by examining current usage. To achieve this objective, surveys were conducted and measurement were taken between June 15 and lune 30, 2005. The data were gathered from 50 women over 65- years-old who live in the downtown and suburbs of Seoul, Korea. The collected data were processed using SPSS 12.0 for Microsoft Windows and resulted in the following conclusions: The kitchen for the aged needs to be laid out in ㄱ-shape and the refrigerator needs to be positioned prominently. The height of the work counter is relative to the user's height (${\times}0.49{\sim}056$). and the length varies depending on the available space of the house and the type of work counter needed: however it was found that it should be at least 270cm Concerning the depth of the work counter, the standard sizes (60cm) currently on the market did not cause any inconvenience. It was found that the sink must be designed to allow for some space at the bottom so as to ensure comfortable sedentary work. Also, an electrical oven was preferred over a gas-fuelled one. Finally, the height of the upper cabinet should be relative to the user's height at ${\times}0.85{\sim}1.0$ from the floor to the bottom of the cabinet.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.4 no.4
• /
• pp.767-773
• /
• 2000

As computer systems and communication technologies develop rapidly, CSCW(Computer Supported Collaborative Work) system appears nowadays, through which it is available to work on virtual space without any restriction of time and place. Most of CWCS systems depend on a special network and groupware. The systems of graphics and CAD are not so many because they are specified by hardware and application software. In this paper, we propose a web-based collaborative CAD system, which can be jointly worked on Internet WWW being independent from any platforms. It can create and modify 3D objects easily using VRML and Java 3D API, and it can send, print, and store them. The interactive work for designing objects can be also carried out through chatting with each other. This system is executed in the environment of Client/server architecture. Clients connect to the CAD sewer through Java applet on WWW. The server is implemented by Java application, and it consists of three components : connection manager which controls the contact to users, work manager which keeps viewing in concurrency and provides virtual work space sharing with others, and solid modeler which creates 3D object.

• Journal of the Korean Association of Geographic Information Studies
• /
• v.10 no.4
• /
• pp.111-121
• /
• 2007

Diagnosis and Prediction of urban industrial structure is a key subject for establishment of sustainable urban development plan. By this time, studies of industry-related urban spatial structure have been concentrated on measurement of space distribution by industry type mainly using data about urban industries or total worker numbers. Now, status of workers become an important issue so this study analyzed qualitative change of urban industrial structure in the view of space using work status classification system. For that, data for work status in 1994 and 2004 were collected in towns and villages, and space analysis units were coincided based on change data between 1994 and 2004. Then, it analyzed spatial distribution pattern of employment through qualitative standard called work status using GIS. The analysis results by work status type of Busan industrial structure in GIS circumstance were as below. First, traditional labor intensive industries met a limit and service and wholesale/retail sale industries went to be poor livelihood. Therefore, Busan's employment rate should be decreased and worker numbers were statistically increased, however, irregular and non-wage workers were suddenly increased. So, it was determined that the quality of employment in Busan area came down. Second, a traditional downtown area has dwindled; on the other hand, employment has been increased in new town or new industrial complex and in the area developed services rather than the manufacturing industry. It is expected that the result of this study may be meaningful as data to prepare for longterm industrial development plan through qualitative evaluation called work status as well as to make behavior pattern of industrial structure which is basis of urban development.

• The Journal of Art Theory & Practice
• /
• no.1
• /
• pp.49-70
• /
• 2003

What is an exhibition? Is it of the system which is designed to serve Art Works in their representation, or is it a place where the artistic presentation could be considered as art work itself? After modernist era, the role of exhibitional space might have been shifted from those two principle raison d'$\^{e}$tre of exhibitional space into another, a new one. What Deleuze would call it as he borrowed the term from Spinozian philosophy : the Affectional Space. This new type of exhibitional space has been announced since 1969 when a Harald Szeeman, young independent curator and art critic from Swiss, has organized his brilliant exhibition "When Attitudes become Form" in Bern. For sure, these intensities in curatorial practices have been existing before like some early 20th century exhibitional efforts by Marcel Duchamp, El Lissitzky, Yve Klein, etc. It has influenced much on many of, otherwise most of contemporary art exhibiting practices. And now it seems to be necessary to give it a conceptual idea which could enlighten better the new paradigm of exhibitional practices that we try to clarify. I would propose the idea of that new exhibitional space as "space of non-organic becoming". This idea is inspired by Deleuze's ever famous philosophical work Thousand Plateaus, which, with Folds by the same author, has contributed to many contemporary and aesthetical debating issues. What is "affect"? Explaining about Spinoza's principle concepts, Deleuze defines it as a kind of durations or variations which are constituted by different levels of perfection. One perfection is precedented or followed by certain perfection bigger or lesser through lived transitions or passages. So each time it actualizes and reflects the state of All as a cut of Reality while each state of affections, images or ideas can not be separated from the duration which binds it to the precedent state and extends it to following one. Affect is also a term of changes. One affects at the same time it is affected. Exhibitional space as affect (or affectional space) is distinguished from representational and presentational space in the way it attributes movement, produces arrangements and generates new factors of artistic creation including those which are outside of ever accepted artistic elements. The concepts of affectional space are used especially to enlighten contemporary situation of artistic and curatorial processes. Art is no more limited to be seen as mere objects of aesthetical admiration, nor as art vis-$\`{a}$-vis art relationship apart from the whole. It includes possibilities and virtuality that appear in the imperceptible and undescribable manners if delimited in given language. As once noticed by Kuhn, we might be living in a paradigmatically shifting world, not only in Art but also in Life. And we need to express it more with Art as moving and affectional nods than as just a clean window or a distinct manual book.

• Journal of Korean Society for Geospatial Information Science
• /
• v.20 no.4
• /
• pp.105-115
• /
• 2012

Today, the domestic construction area has changed from the ground development area to the underground space development area. In addition, the problems of sprawling development and environmental pollution in the process of developing underground space have become significant. In the circumstances, it is expected that the use of underground space information, which helps to understand underground space, will be on the sharp rise. However, the underground information in Korea is separately established and managed by each institution, and it is difficult to use the information in an integrated way. Therefore, at the time when the information on underground space is integrated, it is required to perform the integrated DB standardization in order to establish the integrated infrastructure of underground space information. In this work, this researcher studied a plan of using the standardization of the integrated infrastructure of underground space information. As a result, this work suggested standardization of each geologic stratum, standardization of unit systems, and standardization of the connection of underground space information regarding the standardization contents of underground space information integration. To examine its availability, this researcher conducted a questionnaire survey with experts of each institution. As a result, the suggested plan was found to be have high availability.

• Journal of Astronomy and Space Sciences
• /
• v.29 no.2
• /
• pp.233-244
• /
• 2012

The Korea Astronomy and Space Science Institute and the Department of Astronomy at the University of Texas at Austin are developing a near infrared wide-band high resolution spectrograph, immersion grating infrared spectrometer (IGRINS). The compact white-pupil design of the instrument optics uses seven cryogenic mirrors, including three aspherical off-axis collimators and four flat fold mirrors. In this study, we introduce the optomechanical mount designs of three off-axis collimating mirrors and one flat slit-viewer fold mirror. Two of the off-axis collimators are serving as H and K-band pupil transfer mirrors, and are designed as system alignment compensators in combination with the H2RG focal plane array detectors in each channel. For this reason, the mount designs include tip-tilt and parallel translation adjustment mechanisms to properly perform the precision alignment function. This means that the off-axis mirrors' optomechanical mount designs are among the most sensitive tasks in all IGRINS system hardware. The other flat fold mirror is designed within its very limitedly allowed work space. This slit-viewer fold mirror is mounted with its own version of the six-point kinematic optics mount. The design work consists of a computer-aided 3D modeling and finite element analysis (FEA) technique to optimize the structural stability and the thermal behavior of the mount models. From the structural and thermal FEA studies, we conclude that the four IGRINS mirror mounts are well designed to meet all optical stability tolerances and system thermal requirements.