• Clean Technology
• /
• v.21 no.1
• /
• pp.76-82
• /
• 2015

Volatile organic compounds (VOC) free adhesives have been interested by many scientists and engineers due to environmental regulations and the safety of industrial workers. In this work, a series of composites composed with bisphenol A epoxy resin used as solvent, dicyandiamide, and promoter were prepared to investigate the most appropriate molar ratio for steel-steel adhesion. The cured test specimen of each composite were measured with universal testing machine (UTM) to figure out mechanical properties such as tensile strength, Young’s modulus, and elongation. Furthermore, the lap shear strength of the specimen was tested with UTM while impact resistance was measured with Izod impact tester. The composite whose molar ratio of epoxy resin to curing agent is 1 : 0.9 (sample 3), showed better tensile strength, coefficient of elastic modulus, elongation, and impact strength than other composites did. The highest tanδ from dynamic mechanical analysis (DMA) was observed from sample 2 (epoxy resin: dicy = 1 : 0.7) while sample 3 showed slightly lower tanδ than that of 2. The morphology of the fracture surface of the cured composites from SEM showed that the number of subtle lines on the surface caused by impact increase as the contents of amine curing agent accrete. Furthermore, the viscosity change of sample 5 (epoxy resin: dicy = 1 : 1.3) was observed to confirm its storage stability.

• Korean Journal of Air-Conditioning and Refrigeration Engineering
• /
• v.27 no.7
• /
• pp.380-394
• /
• 2015

This article reviews the papers published in the Korean Journal of Air-Conditioning and Refrigeration Engineering during 2014. It is intended to understand the status of current research in the areas of heating, cooling, ventilation, sanitation, and indoor environments of buildings and plant facilities. Conclusions are as follows. (1) The research works on the thermal and fluid engineering have been reviewed as groups of heat and mass transfer, cooling and heating, and air-conditioning, the flow inside building rooms, and smoke control on fire. Research issues dealing with duct and pipe were reduced, but flows inside building rooms, and smoke controls were newly added in thermal and fluid engineering research area. (2) Research works on heat transfer area have been reviewed in the categories of heat transfer characteristics, pool boiling and condensing heat transfer and industrial heat exchangers. Researches on heat transfer characteristics included the results for thermal contact resistance measurement of metal interface, a fan coil with an oval-type heat exchanger, fouling characteristics of plate heat exchangers, effect of rib pitch in a two wall divergent channel, semi-empirical analysis in vertical mesoscale tubes, an integrated drying machine, microscale surface wrinkles, brazed plate heat exchangers, numerical analysis in printed circuit heat exchanger. In the area of pool boiling and condensing, non-uniform air flow, PCM applied thermal storage wall system, a new wavy cylindrical shape capsule, and HFC32/HFC152a mixtures on enhanced tubes, were actively studied. In the area of industrial heat exchangers, researches on solar water storage tank, effective design on the inserting part of refrigerator door gasket, impact of different boundary conditions in generating g-function, various construction of SCW type ground heat exchanger and a heat pump for closed cooling water heat recovery were performed. (3) In the field of refrigeration, various studies were carried out in the categories of refrigeration cycle, alternative refrigeration and modelling and controls including energy recoveries from industrial boilers and vehicles, improvement of dehumidification systems, novel defrost systems, fault diagnosis and optimum controls for heat pump systems. It is particularly notable that a substantial number of studies were dedicated for the development of air-conditioning and power recovery systems for electric vehicles in this year. (4) In building mechanical system research fields, seventeen studies were reported for achieving effective design of the mechanical systems, and also for maximizing the energy efficiency of buildings. The topics of the studies included energy performance, HVAC system, ventilation, and renewable energies, piping in the buildings. Proposed designs, performance performance tests using numerical methods and experiments provide useful information and key data which can improve the energy efficiency of the buildings. (5) The field of architectural environment was mostly focused on indoor environment and building energy. The main researches of indoor environment were related to the evaluation of work noise in tunnel construction and the simulation and development of a light-shelf system. The subjects of building energy were worked on the energy saving of office building applied with window blind and phase change material(PCM), a method of existing building energy simulation using energy audit data, the estimation of thermal consumption unit of apartment building and its case studies, dynamic window performance, a writing method of energy consumption report and energy estimation of apartment building using district heating system. The remained studies were related to the improvement of architectural engineering education system for plant engineering industry, estimating cooling and heating degree days for variable base temperature, a prediction method of underground temperature, the comfort control algorithm of car air conditioner, the smoke control performance evaluation of high-rise building, evaluation of thermal energy systems of bio safety laboratory and a development of measuring device of solar heat gain coefficient of fenestration system.

• Clean Technology
• /
• v.22 no.2
• /
• pp.122-131
• /
• 2016

Caesium radioisotopes, ¹³⁴Cs and ¹³⁷Cs which come from the atmospheric nuclear tests and discharges from nuclear power plants, are very important to study artificial radioactivity. In this work, in order to lower the minimum detection activity (MDA) we investigated environmental radioactivity according to the Environment Measurement Laboratory procedure by ¹³⁷Cs and ¹³⁴Cs which is similar to chemical and environmental behaviors of ¹³⁷Cs. The environmental soils in high mountain areas near nuclear power plant were collected, and an Ammonium Molybdophosphate (AMP) precipitation method, which showed high selectivity toward Cs⁺ ions, was applied to chemically extract and concentrate Caesium radioisotopes. Radioactivity was estimated by a gamma-ray spectrometry. In gamma energy spectrum, with an increasing of ⁴⁰K radioactivity, it increased the MDA of ¹³⁴Cs and ¹³⁷Cs. Therefore, if the natural radionuclides were removed from the soil samples, the MDA of Caesium may be reduced, and the contents of ¹³⁷Cs of in the environmental soils can effectively be estimated. In the standard soil sample of Korea Institute of Nuclear Safety, radioactivity of ⁴⁰K was removed more than 84% on average, and the MDA of ¹³⁴Cs was reduced 2 times. The content of ¹³⁷Cs was recovered over 84%. On the other hand, in environmental soils, AMP precipitation method showed removal ratio of ⁴⁰K up to 180 times, which reduced the MDA about 5 times smaller than those of Direct method. ¹³⁷Cs recovery ratio showed from 54.54% to 70.06%. When considering the MDA and recovery ratio, AMP precipitation method is effective for detection of Caesium radioisotopes in low concentration.

• Journal of Preventive Medicine and Public Health
• /
• v.22 no.3 s.27
• /
• pp.389-397
• /
• 1989

To identify the problems in child rearing practice of employed mothers in urban poor area, all of 201 women with children under 6 years old living in Yun San 3 Dong, a poor area of Pusan city, were interviewed with a questionnaire by a trained interviewer from 10th April to 10th May 1989. Among 201 women, 51 women were employed and 150 women were unemployed. Of the employed mothers 78.5% got their jobs because of economical need and 31.4% of them worker for 60-69 hours per week. Their average monthly income was 100,000-190,000 Won in 33.4% and 200,000-290,000 Won in 25.4% Breast milk was fed in 66.0% of the children of unemployed mothers while 49.0 of the children of the employed mothers were breast-fed (p<0.05). The most common reason for not breast feeding was shortage of breast milk among unemployed mothers (58.9%) but that of the employed mothers was their job(63.6%). The basic immunization for children was completed in 70.5% of children of employed mothers as compared with 82.0% of the children of the unemployed mothers were completely immunized (p>0.1). Accident experience rate of children among the employed mothers was 23.5 a and that of the children of the unemployed mothers was 17.3% . The most common cause of acident in children of the unemployed mothers was carelessness while they were playing(34.6%) but in children of the employed mothers it was traffic accident(25.0%) and falling(25.0%). Most of the traffic accidents took place while the children's brother or sister of age under 14 years were baby sitting. When the accident took place 73.1% of the unemployed mothers were just at home, but 58.3% of the employed mothers were out of home for work. In case of the employed mothers, 58.7% of their children were looked after by an adult mainly grandparents, 15.7% by the children's brothers and sisters under 14 years old, and 3.9% of the children were left alone. A majority of the unemployed mothers wanted to get a job if someone could take care of their children. To facilitate the women employment and for the safety and health of the children, good nurseries for working mothers need to be established at a cost they can afford.

• Fire Science and Engineering
• /
• v.18 no.1
• /
• pp.54-66
• /
• 2004

In this article, we are to suggest the hazard-assessing method for the underground pipelines, and find out the pipeline-maintenance schemes of high efficiency in cost. Three kinds of methods are applied in order to refer to the approaching methods of listing the hazards for the underground pipelines: the first is RBI(Risk Based Inspection), which firstly assess the effect of the neighboring population, the dimension, thickness of pipe, and working time. It enables us to estimate quantitatively the risk exposure. The second is the scoring system which is based on the environmental factors of the buried pipelines. Last we quantify the frequency of the releases using the present THOMAS' theory. In this work, as a result of assessing the hazard of it using SPC scheme, the hazard score related to how the gas pipelines erodes indicate the numbers from 30 to 70, which means that the assessing criteria define well the relative hazards of actual pipelines. Therefore. even if one pipeline region is relatively low score, it can have the high frequency of leakage due to its longer length. The acceptable limit of the release frequency of pipeline shows 2.50E-2 to 1.00E-l/yr, from which we must take the appropriate actions to have the consequence to be less than the acceptable region. The prediction of total frequency using regression analysis shows the limit operating time of pipeline is the range of 11 to 13 years, which is well consistent with that of the actual pipeline. Concludingly, the hazard-listing scheme suggested in this research will be very effectively applied to maintaining the underground pipelines.

• Journal of the Korean Arthroscopy Society
• /
• v.4 no.2
• /
• pp.159-165
• /
• 2000

Purpose : Endoscopic carpal tunnel release technique was developed and has being used to decrease postoperative morbidity and complications. The purpose of this study was to evaluate the clinical results and clinical usefulness of endoscopic carpal tunnel release using single portal technique. Methods and Materials : 18 carpal tunnel syndrome patients who were diagnosed by means of clinical symptoms, physical examination, and electrodiagnostic study had endoscopic carpal tunnel release using single portal technique with about 1 cm oblique wrist incision on 30 hands. And then they were followed-up and reviewed in the same way. Late results of operation were analysed by grading system according to patient's own assessments of relief of symptoms at the final fellow-up. The follow-up period ranged 6 to 13 months from surgery. Results : There were postoperative improvements with respect to clinical symptoms, physical examination, and electrodiagnostic study. 23 of 30 hands$(76.7\%)$ had complete resolution of symptoms. 27 hands$(90\%)$ were able to return to normal activities and work within 6 weeks, and 30 hands$(100\%)$ returned within 8 weeks. In grip strength study, 29 hands$(96.6\%)$ regained preoperative strength in 6 months. 12 of 22 hands$(55\%)$ had improvement with respect to thenar atrophy within 6 months. Late results were as follows . 23 hands$(76.7\%)$ was graded as excellent, 6 hands$(20\%)$ graded as good and 1 hand$(3.3\%)$ graded as fair, and there was no poor result. Conclusion : We think that endoscopic carpal tunnel release with single portal technique is technically safe and simple, if the surgeon takes step to stay within the safety zone based on local anatomy and selects an appropriate patient and that endoscopic carpal tunnel release does have advantages over open release. We agree that the surgeon must be prepared to perform an open technique, if technical difficulties arise, difficulty in introducing the device into the carpal tunnel is encountered, or the transverse fibers of the transverse carpal ligaments are not clearly seen.

• Korean Journal of Heritage: History & Science
• /
• v.52 no.2
• /
• pp.240-253
• /
• 2019

Archaeological heritages are precious cultural relics and public assets that must be preserved, conserved, and shared with people all over the world. Investigating archaeological heritage is valuable and plays an important role for the public good; our ancestors' cultures can be restored, and it helps with developing a clear understanding of the cultural and social aspects of a historical period as well as teaches about historical factors unreported in the literature. One of the most basic and important conditions necessary for recognizing the value and importance of archaeological heritage investigation, expertise, and quality improvement is to establish detailed criteria for investigation services and the qualification examination of archaeological heritage. Observation of detailed criteria and the qualification examination of archaeological heritage can partially demonstrate society's recognition of strengthening transparency, public property, and the objectivity of the investigation of archaeological heritage. However, the detailed criteria for investigation services and the qualification examination of archaeological heritage currently implemented as administrative rules are neither followed by all institutes in the public and private sectors nor the government. Thus, there are serious problems in terms of the effectiveness and stability of institutions. The detailed criteria for the qualification examination breach the principle of statutory reservation, the principle of statutory regulation, and regulations on the announcement and management of orders and rules. Non-compliance with compensation criteria for investigation services or with detailed criteria for the qualification examination of archaeological heritage will be one of the reasons for the failure of the investigation foundation for archaeological heritage in the future. That is, it will result in the expansion, reproduction, and repetition of a vicious cycle of conflict between developers, who are the decision-makers responsible for selecting an investigating organization for archaeological heritage and determining the cost, and investigating organizations. This includes the impractical shortening of investigation periods and reducing costs by developers, distrust of the values and the importance of investigations of archaeological heritage, a decrease in quality, accidents caused by a lack of safety, a lack of occupational ethics, and non-recruitment of new experts, etc. Therefore, it is necessary to change the structure from a vicious cycle to a virtuous cycle, and promote the enactment of regulations that will ensure effectiveness and stability in the process of attaining the goals of the institution and application of the institution, as well as the continuous advancement of work to fill the gaps with reality.

• The Korean Journal of Air & Space Law and Policy
• /
• v.33 no.2
• /
• pp.3-34
• /
• 2018

Korea's air transport industry has a 70-year history since Korea National Airline was establishment in October 1948. Korea has 9 airlines which have international air transport business licenses, and as of 2017, air transport performance(Domestic & International) is ranked 8th in the world. Through analysis of Korea's air transport industry, this paper examines the essential problems of the domestic air transport industry and what policies and laws should be supplemented, and presents an "Policy Directions for the Air Transport Industry" that can continue to grow into a global aviation leading country in the future. Analysis of aviation statistics shows that the nation's air transport industry has a very high growth rate, and national airlines continue to invest in sustainable growth. Furthermore, new companies are also trying to enter the market. As of November 2018, four companies applied for licenses for international air transport business, one for international air transport business (cargo) license, and the Ministry of Land, Infrastructure and Transport is expected to decide whether to issue the license by first quarter of 2019. While some expect price reductions and consumer benefits through competition promotion, others worry about worsening airline financial structures and reducing safety investment due to competition. To sum up the problems of the nation's air transport industry, first, low-cost airlines focus only on attracting domestic demand, and thus have a weak foundation for continued growth. Second, the rapid growth in recent years has led to the lack of aviation professionals such as pilots and technicians and the saturation of slots at major airports. Third, since the financial soundness of airlines is not systematically managed, the financial situation of airlines can quickly deteriorate and the damage can be attributed to consumers. In order for the national airlines to continue to develop, the first is to focus on the endless demand of the global aviation market and to secure international competitiveness. Second, the government should support the airline infrastructure according to the size of the air transport industry, third, we will systematically nurture aviation experts who will lead the future of the nation's air transport industry, and finally, the government will have to continuously manage the financial status of airlines to prevent consumer damage in advance. Nowadays the air transport industry has become very competitive. Not only do airlines have to work hard for the sustainable development of national airlines, but all government agencies must support our airline companies in policy to win international competition.

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.32 no.1
• /
• pp.65-73
• /
• 2019

In order to increase the production efficiency of the ship and shorten the production cycle, it is important to evaluate the accuracy of the ship components efficiently during the drying cycle. The accuracy control of the block is important for shortening the ship process, reducing the cost, and improving the accuracy of the ship. Some systems have been developed and used mainly in large shipyards, but in some cases, they are measured and managed using conventional measuring instruments such as tape measure and beam, optical instruments as optical equipment, In order to perform accuracy control, these tools and equipment as well as equipment for recording measurement data and paper drawings for measuring the measurement position are inevitably combined. The measured results are managed by the accuracy control system through manual input or recording device. In this case, the measurement result is influenced by the work environment and the skill level of the worker. Also, in the measurement result management side, there are a human error about the lack of the measurement result creation, the lack of the management sheet management, And costs are lost in terms of efficiency due to consumption. The purpose of this study is to improve the working environment in the existing accuracy management process by using the augmented reality technology to visualize the measurement information on the actual block and to obtain the measurement information And a smart management system based on augmented reality that can effectively manage the accuracy management data through interworking with measurement equipment. We confirmed the applicability of the proposed system to the accuracy control through the prototype implementation.

• Korean Journal of Heritage: History & Science
• /
• v.38
• /
• pp.329-358
• /
• 2005

The Three storied Stone pagoda in Gameunsa Temple site, one of the early staged stone pagodas, has been known as a standard for Silla stone pagodas. A stone pagoda is not only a stone art work and but also a stone structure. Most studies and investigation of the stone pagoda has done mainly based on style and chronological research according to an art historical view. However, there is not an attempt to research the stone pagoda as a stone architecture. Most Korean experts at the stone pagoda has art history in their background. Engineers who can understand the structure of the stone pagoda are very limited. More architectural and engineering approach is need to research not only art historial understanding but also safety as a structure. We can find many technical know-how from our ancestors who made stone pagodas. 1. To reduce any deformation such as relaxation and sinking of BuJae which is caused by a heavy load, the BuJae (consist of a foundation stone and lower stereobates) should be enlarged. 2. A special construction method for connection between Myonsuk and Tangjoo was invented. This unique method is not used any longer after the Three storied Stone pagoda in Gameunsa Temple site. 3. The upper BuJae and the lower BuJae are missed each other by making a difference of Okgaesuk and Okgaebatchim in size. It is done for a distribution of perpendicular load and a prevention for relaxation of BuJae. 4. The center of gravity in the BuJae is located to the center of the stone pagoda by trimming the upper surface of the Okgaebatchim into a convex shape. The man who made stone pagodas had excellent knowledge on the engineering and techniques to understand the structure of the stone pagodas. We can confirm it as follows: the enlarged BuJae, dislocated connection between upper Bujae and lower BuJae, and moving the center of gravity close to the center of the stone pagoda.