• 한국소음진동공학회논문집
• /
• 제25권10호
• /
• pp.685-691
• /
• 2015

In this work, to identify effective parameter for performance of piezoelectric jetting dispenser, experimental investigation is carried out based on design of experiment. After preparing jetting dispenser using two stack-type piezoelectric actuators, basic working principle of the jetting dispenser is described. Eight operating conditions are chose as main factors and it is assumed that each factor has two levels. To reduce number of experiments for performance evaluation, the experimental sets are designed based on factional factorial design method. Experimental setup is established and the weight of single dot is measured by using precision scale. The main and interaction effects of factors are analyzed using commercial statistical program and optimal operating condition for small amount and small variation of weight of dispensed single dot are determined.

• 한국멀티미디어학회논문지
• /
• 제24권1호
• /
• pp.95-105
• /
• 2021

In the case of laptops and tablet PC's that replace desktop, it uses the Windows operating system to provide various functions depending on operating system dependency, the Windows operating system does not support real-time processing because it uses multi-level feedback queue scheduling that extends round-robin scheduling. Also, since the initial value of Local APIC Counter can not be obtained from the Windows 8, the real-time processing function provided through the existing RTiK does not work. In this paper, we calculate Local APIC Counter value by using MSR_FSB_FREQ register to support real-time processing function on tablet PC's. We designed and implemented RTiK+, which provides real-time processing function to guarantee the periodicity by calculating the operation time of accurate timer. In order to verify and evaluate the performance of the implemented the RTiK+, the period was measured by using the Read Time-Stamp Counter(RDTSC) instruction and it was confirmed that it operates normally at 1ms and 0.1ms period.

• The Journal of Asian Finance, Economics and Business
• /
• 제9권6호
• /
• pp.105-114
• /
• 2022

With the help of this study, we aim to investigate the influence of Financial Distress (FD) and information and communication technology (ICT) on the operating performance and efficiency of banks in the Indian banking sector. FD can be defined as a position in which a company or individual is not in a condition to fulfill their promise of paying their obligations on time. The term "financial distress" refers to a situation in which a corporation or individual is unable to keep their promise of paying their debts on time. In this work, panel data analysis (PDA) was used to analyze data from 33 Indian banks over ten years (2010 to 2019). According to the findings, FD has a positive and significant impact on bank operational performance and efficiency. The current study will give the banking industry a better understanding of how a bank's performance can be negatively impacted by distressing conditions that render it inefficient and ineffective. Second, it will show investors how the level of distress can have a significant impact on bank performance in the market, finally resulting in the loss of money invested.

• Nuclear Engineering and Technology
• /
• 제56권3호
• /
• pp.1081-1090
• /
• 2024

The liquid Lead-bismuth eutectic is used as the coolant for Gen-IV reactor concepts. However, due to its strong corrosive and high operating temperature, it is difficult to accurately measure the flow rate in long-term operating conditions. Venturi flowmeter is a simple structured flowmeter, which plays a very important role in the flow measurement of high-temperature liquid metals, especially since the existing flowmeters are difficult to be competent. It has the advantages of easy maintenance and stable operation. Therefore, it is necessary to study the operating conditions of the venturi flowmeter under high-temperature conditions. This work performs a series of simulations of the fluid-solid interaction between the flow liquid metal and venturi flowmeter with COMSOL software, including the dimensional sensitivity analysis of the venturi flowmeter to explore the most suitable structure and parameters for liquid heavy metal, the sensitivity analysis of the geometric parameters of the venturi tube on the varying conditions. It shows that when the contraction angle of the venturi flowmeter is 33°, the diffusion angle is 13°, the diameter of the throat is 8 mm, and the temperature of the lead-bismuth eutectic is 733.15 K, it is most suitable for the measurement in the lead-bismuth circuit.

• International Journal of Control, Automation, and Systems
• /
• 제4권6호
• /
• pp.669-681
• /
• 2006

In this work, a new method of design adaptive controllers for SISO systems based on multiple models and switching is presented. The controller selects the model from a given set, according to a switching rule based on output prediction errors. The goal is to design, at each sample instant, a predictive control law that ensures the robust stability of the closed-loop system and achieves the best performance for the current operating point. At each sample the proposed control scheme identifies a set of linear models that best characterizes the dynamics of the current operating region. Then, it carries out an automatic reconfiguration of the controller to achieve the best possible performance whilst providing a guarantee of robust closed-loop stability. The results are illustrated by simulations a nonlinear continuous and stirred tank reactor.

• 한국윤활학회:학술대회논문집
• /
• 한국윤활학회 2002년도 proceedings of the second asia international conference on tribology
• /
• pp.153-154
• /
• 2002

Wear map of silver coatings on AISI 52100 has been constructed to delineate the wear transition behavior with the change in operating conditions in various environments. Three main regimes were clearly identified: (i) elastic/plastic deformation of silver coating without failure. (ii) mild wear regime after initial failure of silver coating and (iii) severe wear regime. In the mild wear regime, the contact surfaces were covered with transfer layers of agglomerated wear particles. The transfer layer acted as a protective layer and resulted in low friction even after the initial failure of the coated films, whose characteristics were strongly dependent on both the operating and environmental conditions. Also, the existence of the critical sliding speed, above which no transfer layer was able to form, was discussed in the work.

• Journal of information and communication convergence engineering
• /
• 제8권2호
• /
• pp.205-211
• /
• 2010

In this study, a Magnetic stimulation Pulse Train control technique is introduced and applied to Flyback converter operating in discontinuous conduction mode. In contrast to the conventional pulse width modulation control scheme, the principal idea of a Magnetic stimulation Pulse Train is to achieve output voltage regulation using high and low power pulses. The proposed technique is applicable to any converter operating in discontinuous conduction. However, this work mainly focuses on Flyback topology. In this paper, the main mathematical concept of the new control algorithm is introduced and simulations as well as experimental results are presented.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2011년도 정기총회 및 추계학술대회 논문집
• /
• pp.1624-1630
• /
• 2011

Currently the train operating environment to affect track irregularity is changed rapidly such as speed-up, linear improvement and rolling stack upgrade. The recent track maintenance criteria of track irregularity was quoted from past Japan's, and the needs of revision of criteria are increased because of the rapid change in train operating environment. In case of enhance the track irregularity criteria, it secure driving safety and riding comfort but maintenance cost are increase. And also decrease ballast durability by frequent corrective work. In case of mitigate the criteria, it decrease driving safety and riding comfort, but save the maintenance cost. The study for enacting rational criteria did not carry out so far. In this study, survey the domestic and international track irregularity and case study for track irregularity inspection results and maintenance history for guideline of enacting irregularity criteria study.

• Journal of Information Processing Systems
• /
• 제9권2호
• /
• pp.189-204
• /
• 2013

The confinement problem was first noted four decades ago. Since then, a huge amount of efforts have been spent on defining and mitigating the problem. The evolution of technologies from traditional operating systems to mobile and cloud computing brings about new security challenges. It is perhaps timely that we review the work that has been done. We discuss the foundational principles from classical works, as well as the efforts towards solving the confinement problem in three domains: operating systems, mobile computing, and cloud computing. While common issues exist across all three domains, unique challenges arise for each of them, which we discuss.

• 무역상무연구
• /
• 제60권
• /
• pp.235-255
• /
• 2013

This thesis examines the problems faced in the electronic trade specialized service provider for which improvements are necessary, and suggests various ways of overcoming those problems. First, from the legal aspect, it is necessary to clarify the scope of duties as well as to expand the threshold for entrance and business areas through the amendment of related laws. Second, from the operating aspect, the e-trade specialized service provider should be able to provide convenient work spaces through user-centered interface by connecting, integrating, automating and simplifying various services scattered around through the establishment of an operating system. Third, from the institutional aspect, trade firms should be able to perform e-trade duties without difficulties by specializing and increasing the size of the e-trade specialized service provider system and strengthening job competence. For this, it is required to improve legal registration requirements to enhance the reliability of the e-trade specialized service provider system and secure its financial capacity.