• 한국가스학회지
• /
• 제5권1호
• /
• pp.37-44
• /
• 2001

운전절차 활성 시스템은 운전절차 합성에 필요한 시간과 노력을 줄여주고 좀더 자세하게 운전절차를 분석해 줄 뿐 아니라 인적오류를 줄여주거나 제거해주는 역할을 수행한다. 또한 운전절차를 생성하는데 필요한 전문가들의 지식을 가지고 있어 새로운 상황에 사용할 수 있도록 한다. 그러나 기존의 시스템들은 많은 한계성을 가지고 있다. 따라서 본 연구에서는 이러한 문제를 해결하기 위해 시간논리와 표현논리로 공정의 특성지식과 시간적인 제약조건을 다루는 새로운 접근방법을 제안하여 보일러 공장에 적용하여 그 유효성을 입증하였다.

• 한국압력기기공학회 논문집
• /
• 제9권1호
• /
• pp.35-39
• /
• 2013

The Operating Experience Report(OER) has written about the event and accident happened at a Nuclear Power Plant(NPP). The purpose of publishing the OER is to prevent the similar event or accident repeatedly by spreading the experience of a single plant to other plants personnel. Before initiating the analysis mentioned in this paper, 2,298 review reports for the same number of OER published from 2007 to June 2012 have been written to achieve the correct and objective statistics. The analysis introduced in this paper is performed with the various factors such as year, plant type, equipment, type of work, root-cause. The root-cause analysis is showed that the equipment problem is the major factor in domestic NPPs, but on the other hand human-error is the main part of the foreign NPPs. Moreover, while the number of the man-made event is decreasing, the equipment-made event is rapidly increasing in domestic NPPs.

• 한국안전학회지
• /
• 제33권5호
• /
• pp.21-27
• /
• 2018

The purpose of this study is to develop a SOP (Standard Operating Procedure) for a distribution board that can monitor the leakage current of a load distribution line in real time. The developed distribution board was fabricated by applying IEC 61439-1. It consists of the distribution board and an alarm device. The work process for making the distribution board was compliant with the KEMC (Korea Electrical Manufacturers Cooperative) regulations. And the AC distribution board range is 1,000 V. In addition, the voltage in DC is less than 1500 V. The distribution board receives a 3-phases and 4-wires power supply system and can supply power to the load of a maximum of 32 single or three phase distribution circuits. Also, leakage current measured on the power distribution board was used by sensors installed. The SOP of the developed distribution board consists of the installation standards for the short circuit alarm device and sensor, the surge protection device, switches and indication lamps, and other devices. The operation procedure was prepared so that each manufacturing step of the distribution board must be confirmed by the persons in charge of preparation, production, quality control and approval before moving forward to the next step.

• 한국콘텐츠학회:학술대회논문집
• /
• 한국콘텐츠학회 2009년도 춘계 종합학술대회 논문집
• /
• pp.845-850
• /
• 2009

분산 환경에서 이기종 시스템 간의 독립적이고 표준화된 환경을 지원하기 위해 RT-CORBA(Real-Time Common Object Request Broker Architecture) 기반의 오픈소스 TAO(The ACE ORB) 통신 미들웨어에 대한 연구가 활발해지고 있다. 실시간성 측면에서 TAO는 Windows나 Linux와 같은 범용 운영체제에서는 실시간성을 지원하지 않으며, VxWorks, LynxOS 등과 같은 실시간 운영체제에 의존하여 실시간성을 지원한다. 이에 본 논문에서는 실시간 운영체제인 VxWorks에 TAO 통신 미들웨어를 이식함으로써 TAO가 쓰레드 레벨의 실시간성을 지원할 수 있는 환경을 구축한다. 또한 TAO를 탑재한 범용 운영체제 Windows 및 Linux와의 통신을 통해 VxWorks로의 TAO 이식을 검증한다.

• 한국소음진동공학회논문집
• /
• 제26권7호
• /
• pp.857-864
• /
• 2016

In the present work, vibration analysis of high speed rotary bell cup model for paint atomizer application is carried out through numerical simulation. At first, eight bell cup models, considering four different cup shapes and two different cup diameters, are proposed and corresponding dynamic characteristics are investigated. To evaluate the operating stability, critical speed analysis is conducted using Campbell diagram and separation margin between operating speed and critical speed is identified. Unbalance vibration responses are also studied according to operating speed and balancing quality grade of G. Finally, the stability and adequacy of the proposed bell cup models are discussed for field application.

• 임상간호연구
• /
• 제22권1호
• /
• pp.38-45
• /
• 2016

Purpose: The purpose of this study was to understand the effects of verbal violence experience, social support, and coping patterns on job stress among operating room(OR) nurses. Methods: The participants were 214 operating room nurses in general hospitals. Data were collected from April 1st to May 1st in 2013 and were analyzed using a multiple regression. Results: The most influencing factor on job stress for OR nurses was verbal violence experience from doctor(${\beta}=.35$), and verbal violence experience from nurse (${\beta}=.27$) followed. Social support from co-workers was a significant factor in decreasing job stress (${\beta}=-.22$). Those three factors explained 43.0% (F=54.76, p<.001) of OR nurses' job stress. Conclusion: The findings of this study revealed that doctors' and nurses' verbal violence increased job stress of OR nurses and social support from co-workers was found decreasing OR nurses' job stress. The results of the study provides an necessity for developing an effective program for minimizing job stress of OR nurses caused by work place verbal violence.

• 한국유체기계학회 논문집
• /
• 제17권1호
• /
• pp.12-21
• /
• 2014

An organic Rankine cycle was analyzed to work at the optimal operating point when the heat source is fluctuated. R245fa was adopted as a working fluid, and an axial-type turbine as expander on the cycle was designed to convert the heat energy to the electricity since the turbo-type expander works at off-design points better than the positive displacement-type expander. A supersonic nozzle was designed to increase the spouting velocity because a higher spouting velocity can produce more output power. They were designed by the method of characteristics for the operating fluid of R245fa. Three different cases, such as various spouting velocities, various inlet total temperatures, and various nozzle numbers, were studied. From these results, an optimal operating cycle can be designed with the organic Rankine cycle when the available heat source as renewable energy is low-grade temperature and fluctuated.

• 제어로봇시스템학회논문지
• /
• 제15권9호
• /
• pp.946-951
• /
• 2009

The small multi-jointed robots for most education are developed with the way of firmware. But the firmware may be very difficult to develop as gradually increasing throughputs and control routines. Due to limit of firmware we try to use on RTOS, but hard to adapt on the small multi-jointed robots. It would be hard to install RTOS into the small multi-jointed robots because of the size capacity of RTOS, and lack of libraries for control of the particular hardware. Moreover, even its RTOS with many functions causes its to make overheads scheduling, TCB (Task Control Block), and task states. Also to keep maintenance of RTOS, it is composed of components for the whole structure of my proposed RTOS. Additionally, We provided with libraries of servo motor and sensor control and developed RMS (Rate Montonic scheduler) to handle tasks on real time and reduce overheads. Therefore, It is possible to work the fixed priority and task preemptive way. We show one example of the multi-jointed robot installed with my proposed RTOS, which shows to obstacle avoidance and climbing up the slope.

• 설비공학논문집
• /
• 제23권7호
• /
• pp.505-512
• /
• 2011

Recently, many researchers have analyzed the performance of the transcritical $CO_2$ refrigeration cycle in order to identify opportunities to improve the system energy efficiency. The reduction of the expansion process losses is one of the key issues to improve the efficiency of the transcritical $CO_2$ refrigeration cycle. In this study, the analytical study on the performance characteristics of $CO_2$ cycle with an ejector carried out with a variation of outdoor temperature, gascooler inlet air velocity, evaporator inlet air velocity, and evaporator inlet air temperature. As a result, the system performance could be improved over 85% by using an ejector for various operating condition because of the reduction of compressor work. Moreover, the cooling capacity increased about 18% for variable outdoor condition. Therefore, the high performance of an ejector system could be maintained for wide operating conditions and system reliability could be improved compared to that of a basic system.

• 전기학회논문지
• /
• 제60권11호
• /
• pp.2076-2082
• /
• 2011

The goal of this paper is to find an operating conditions of the single direct ethanol fuel cell such as the cell temperature, and flow rates of ethanol and oxygen. To investigate the output characteristics, the electrical current increased from 0[A] with interval of 0.001[A] every 2[s], and the cell voltage was increased until the voltage became 0.05[V]. Related to the effect of the cell temperature, the output characteristics both voltage and power were increased upto 80[$^{\circ}C$] according to the increase of the current density, but those were decreased over that temperature. In addition, the optimal flow rate of ethanol in anode was identified as of 2[mL/min] due to the dependence of generation rate such as the hydrogen ion and electron. And the flow rate of oxygen in cathode was desirable to about 300[sccm/min], it might be affected by the chemical reaction rate of the water formation among hydrogen ion, electron, and oxygen. Consequently, the fundamental conditions were identified in this work, and it will be carried out to find the best conditions of membrane by the effect of the plasma surface treatment, and the effect of other catalysts except for a platinum.