• Journal of Electrical Engineering and Technology
• /
• v.13 no.4
• /
• pp.1715-1723
• /
• 2018

This work investigates the performance of fully complex- valued radial basis function network(FC-RBF) and complex extreme learning machine (CELM) based neural approaches for classification of power quality disturbances. This work engages the use of S-Transform to extract the features relating to single and combined power quality disturbances. The performance of the classifiers are compared with their real valued counterparts namely extreme learning machine(ELM) and support vector machine(SVM) in terms of convergence and classification ability. The results signify the suitability of complex valued classifiers for power quality disturbance classification.

• 전기의세계
• /
• v.28 no.1
• /
• pp.73-82
• /
• 1979

There are a great number of papers on the Townsend discharge in gases, and many of them are concerned with the effect of the cathode. It has been regarded that there are two kinds of effect of the electrodes, especially of the cathode; (a) the effect caused by the difference of the cathode material and (b) the effect by the change of the cathode surface state even in the same material. Both of them may change the secondary coefficient following after the change of the work function, and the atter may further change the primary ionization coefficient as foreign atoms on the surface may be dseorbed in sparks to decrease the purity of the gas. Thus the two effects must be investigated independently to study the roles of the cathode in gas discharges. In this report the effect of the cathode material on the sparking voltage is described. The experiment is also carried out under the condition that the desorption of impurities from the cathode be negligible. From these the new correlativity between the work function of the cathode and the sparking voltage is obtained. In addition, the interesting character of the minimum point of the Paschen's curve can be found.

• Journal of the Korean Graphic Arts Communication Society
• /
• v.11 no.1
• /
• pp.103-122
• /
• 1993

A cause and counterplan of the increase in dark decay rate of$\varepsilon$-CuPc/PVCz photoreceptor which is consist of the carrier generation layer (CGL) of$\varepsilon$type copper phthalocyanine ($\varepsilon$-CuPc) thin film by an aqueous coating method and the carrier transport layer (CTL) of polyvinylcarbazol (PVCz) by spin coating, are studied in this paper. Electrochemical deposition of CGL was accompanied by an increase in work function of the aluminium substrate during the processes and the enhanced work function 5.3 eV rose above the ionization potential 5.16 eV of $\varepsilon$-CuPc. This resulted in the increased injection of holes from substrate into CGL and a fast dark decay rate. Improved photoreceptor, an electron-transport $\varepsilon$-CuPc/TNF photoreceptor, led to lowing of dark decay rate and increasing of photosensitivity. The carrier generation efficiency (ηg), carrier injection efficiency (ηi) and xerographic gain (G) of the $\varepsilon$-CuPc/TNF photoreceptor were obtained by XTOF method and PIDC.

• Journal of Korea Multimedia Society
• /
• v.11 no.6
• /
• pp.869-874
• /
• 2008

The work of creating character motion needs the higher professional technology and sense and the creating work of realistic and natural motion possess the most part of production term. In this paper we introduce the easy and convenient 3D animation authoring tool which makes the motion based on whole-body inverse kinematics and motion editing function. The proposed 3D animation authoring tool uses the forward kinematics using quaternion and whole-body inverse kinematics to determine the rotation and displacement of skeleton. Also, it provides the motion editing function using multi-level B-spline with quasi-interpolant. By using the proposed tool, we can make 3D animation easily and conveniently.

• Proceedings of the Korean Institute of Surface Engineering Conference
• /
• 2012.05a
• /
• pp.215-215
• /
• 2012

본 연구에서는 화학적 도핑 방법 및 플라즈마 표면 처리방법을 이용하여 그래핀 내 Electron & Hole carrier 들의 농도를 변화시켜, 전계효과에 따른 Graphene Field Effect Transistors (GFETs) 소자의 전기적 특성 변화를 확인 하였으며, 전기적 특성 결과 중에 Dirac-point (DP) 이동에 따른 그래핀 $E_F$ (Fermi-energy) level 변화를 계산 및 유추 하였으며, Ultraviolet Photoelectron Spectroscpy (UPS)를 이용하여 실제적으로 He 소스 광전자를 그래핀 샘플 표면에 입사하여 나오는 전자들의 Kinetic Energy($E_K$) 결과를 이용하여 Work function (WF) 변화를 확인 및 검증하였다.

• Bulletin of the Korean Chemical Society
• /
• v.12 no.5
• /
• pp.574-582
• /
• 1991

The CO molecules adsorbed on Ni(111) surface is studied in the cluster approximation employing EH method with self-consistent charge iteration. The effect of CO coverage is simulated by allowing the variation of valence state ionization potentials of each Ni atom in model cluster according to the self-consistent charge iteration method. The CO coverage dependent C-O stretching frequency shift, adsorption site conversion, and metal work function change are attributed to the charge transfer between metal surface and adsorbate. For CO/Ni(111) system, net charge transfer from Ni surface to chemisorbed CO molecules makes surface Ni atoms be more positive with increasing coverage, and lowers Ni surface valence band. This leads to a weaker interaction between metal surface valence band and Co $2{\pi}^{\ast}$ MO, less charge transfer to a single CO molecule, and the bule shift of C-O stretching frequency. Further increase of coverage induces the conversion of 3-fold site CO to lower coordination site CO as well as the blue shift of C-O stretching frequency. This whole process is accompanied by the continuous increase of metal work function.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.36 no.5
• /
• pp.482-487
• /
• 2023

A carbon-based hybrid resistor was fabricated using carbon nanotube (CNT) paste as an adhesive layer to establish electrically continuous ohmic contacts between CNT sheets and different CNT sheet or copper based metal alloy plates, and its electrical properties were evaluated. CNT sheets were fabricated using vacuum filtration with a CNT solution dispersed in isopropyl alcohol (IPA) solvent. The electrical characteristics of these carbon-based hybrid resistors were investigated. The CNT paste fulfilled the requirements for forming ohmic contacts between CNT sheets and metal alloy plates, which was attributed to the lowest work function difference and excellent wettability at the interface.

• Korean Journal of Construction Engineering and Management
• /
• v.14 no.1
• /
• pp.133-143
• /
• 2013

BIM can be utilized variously in construction management(CM) in the respect that it helps to manage comprehensively the construction information and make reliable decisions, but the adoption of BIM is insufficient in the CM area. The purpose of this study is to develop work process models and their guides in order to utilize BIM effectively in CM work at construction stage. This study defined BIM functions as 'BIM converting design', 'Model review', 'Data extraction', 'Automatic estimate', '4D simulation', 'Drawing creation', 'Engineering sector linkage analysis' through literature search, and generated CM works applicable to BIM by analyzing the CM work and process. This study developed BIM-based CM work process models by reconstructing the existing work process in connection with BIM function through an analysis on the relationship between BIM function and CM work, and reconstructing the role of each project participants. In order to improve the usefulness of the developed models, guides that described the BIM works of project participants were prepared through interviews and case studies. To validate the utilization of the models, a comparative analysis on the BIM process of precedent studies was also made and a survey was conducted on experts. This study can contribute to increasing the utilization of BIM in the CM area and can be helpful for CM companies to develop an in-house BIM guide. In the future, it will be necessary to make an assessment on the models from a business perspective through case applications and constantly update BIM-based CM work process model in consideration of the expansion of CM work due to the application of BIM.

• Therapeutic Science for Rehabilitation
• /
• v.11 no.4
• /
• pp.41-53
• /
• 2022

Objective : The purpose of this study is to identify and analyze the vocational rehabilitation evaluation tool for the mentally disabled. Methods : For literature search, the Pubmed database was used, and for the analysis, the development year, evaluation method, number of items, scale, and evaluation items were analyzed. In the analysis method, each evaluation item was divided into four categories: function, internal factor, environment, and mental symptom, and the evaluation elements of each evaluation tool were identified. Results : When searching Pubmed through search terms, 161 documents were retrieved. According to the selection method, Griffiths Work Behavior Scale (GWBS), Occupational Functioning Scale (OFS), Social and Occupational Functioning Assessment Scale (SOFAS), Work Ability Index (WAI), Work Behavior Inventory (WBI), Work Environment Impact Scale (WEIS), and Work and Social Adjustment Scale (WSAS) were screened. The evaluation items of all evaluation tools included job-related functional evaluation. According to the purpose of each evaluation tool, internal factors, environment, and mental symptoms were measured. Conclusion : Occupational skills are skills in which various functions such as physical, cognitive, social skills, and coping skills act in a complex way. Therefore, it is necessary to include the four factors analyzed in this study: function, internal factors, environment, and psychiatric symptoms.

• 한국전산유체공학회:학술대회논문집
• /
• 2009.11a
• /
• pp.71-76
• /
• 2009

The research to predict the resistance performance of the ship using the CFD analysis is increasing. For the CFD numerical analysis the computational mesh, which is proper to computational model, has to be made before the analysis is begun. In the parametric study, even though the deformation of each case is not very sharp, the whole computational mesh should be regenerated according to the conventional way. Hence, lots of effort is needed to repeated mesh generation work. To solve these problems, the automatic mesh generation method using the macro function of commercial CAD program and mesh generation program is introduced in this study. First, in the CAD program, by using the macro function and putting the deformation rate of bow and stern in lengthwise, the repeated modeling work is performed automatically. Next, the generated geometries are read by the mesh generation program and the proper mesh for the geometry is created automatically also using the macro function. The hybrid mesh which has unstructured grid near the bow and stern and structured grid in the remaining part of domain is used. The verification of the developed method is done by applying the method to predict the resistance performance of the podded propulsion cruise ship of the Daewoo Shipbuilding & Marine Engineering (DSME) in the cases of different length of bow and stern and pod set in different position. The author believes that the introduced method can help to make the database to optimize the resistance performance of the ship in various cases can be constructed without difficulty.