• 한국건설관리학회논문집
• /
• 제9권3호
• /
• pp.126-135
• /
• 2008

본 연구는 설계프로젝트 업무 수행에 있어 지침이 되는 발주자 요구사항의 체계적 관리를 지원하기 위한 정보관리 시스템개발을 목적으로 한다. 먼저, 국내외 발주자관리 업무 현황을 분석하여 개선방향을 도출한 후, 이를 바탕으로 세 가지 실행방안을 설정하고 구체화하였다. 첫 번째 실행방안은 설계자의 발주자대상 업무 체계화로, 정보 중심의 발주자관리 업무프로세스를 정의하였다. 두 번째는 발주자 요구사항 관리로, 발주자 주요관심 요구사항 항목을 설정하였다. 세 번째는 발주자 요구사항 사례정보 관리로, 초기 발주자 요구사항 수집을 지원하기 위하여, 발주자 주요관심항목과 그에 따른 범위를 설정하고, D/B활용방안을 제안하였다. 최종적으로, 이를 지원하기 위한 통합화 시스템안을 개발 제안하였다. 발주자요구사항의 체계적 관리를 통하여 발주자 요구정의의 신뢰도 향상과 발주자 관련 정보 활용도 증진에 기여 할 것이다.

• Advances in aircraft and spacecraft science
• /
• 제5권3호
• /
• pp.363-383
• /
• 2018

One-dimensional (1D) models of incompressible flows, can be of interest for many applications in which fast resolution times are demanded, such as fluid-structure interaction of flows in compliant pipes and hemodynamics. This work proposes a higher-order 1D theory for the flow-field analysis of incompressible, laminar, and viscous fluids in rigid pipes. This methodology is developed in the domain of the Carrera Unified Formulation (CUF), which was first employed in structural mechanics. In the framework of 1D modelling, CUF allows to express the primary variables (i.e., velocity and pressure fields in the case of incompressible flows) as arbitrary expansions of the generalized unknowns, which are functions of the 1D computational domain coordinate. As a consequence, the governing equations can be expressed in terms of fundamental nuclei, which are invariant of the theory approximation order. Several numerical examples are considered for validating this novel methodology, including simple Poiseuille flows in circular pipes and more complex velocity/pressure profiles of Stokes fluids into non-conventional computational domains. The attention is mainly focused on the use of hierarchical McLaurin polynomials as well as piece-wise nonlocal Lagrange expansions of the generalized unknowns across the pipe section. The preliminary results show the great advantages in terms of computational costs of the proposed method. Furthermore, they provide enough confidence for future extensions to more complex fluid-dynamics problems and fluid-structure interaction analysis.

• 사회복지연구
• /
• 제44권1호
• /
• pp.5-31
• /
• 2013

본 연구는 대도시 남성노숙인 시설에서 알코올 의존 노숙인들을 위한 치료공동체 프로그램을 수료하고 현재 회복 중인 6인의 회복 체험에 대한 현상학적 연구이다. 드러난 회복의 의미는 다음과 같다. 첫째 공간적 회복이다. 이들은 자신들이 누워있던 거리를 떠나 공동체에 터를 잡으면서 자신을 바라보는 새로운 시선에 둘러싸이게 된다. 둘째, 신체적 회복으로 눕던 자세에서 벗어나 몸을 일으키면서 이들은 자신의 몸과 마음의 움직임의 주체가 된다. 셋째, 연구참여자들의 시간적 회복은 과거와 현재를 수용하고 미래를 품는 현상으로 드러난다. 넷째, 관계의 회복으로 연구참여자들은 관계망을 통해 사회 내에서 자신의 자리를 만들어 간다. 이들의 사회내에서의 자리는 지위라기보다는 관계망 속에 존재한다. 이러한 연구결과를 토대로 알코올 의존 노숙인에 대한 개입을 위한 실천 함의를 도출하였다.

• 한국정보통신학회:학술대회논문집
• /
• 한국해양정보통신학회 2009년도 춘계학술대회
• /
• pp.108-111
• /
• 2009

최첨단 과학 기술의 발달에 의해 영상의 영역은 타 영역간의 상호의사소통을 더욱 원활하게 만들었으며, 이러한 영역간의 교류는 영역간의 새로운 결합을 촉진시켰다. 이러한 발전과 함께 공공 디자인의 활성화로 인해 영상의 영역은 공공의 의미로 환경디자인의 영역까지 확장되고 있다. 이러한 흐름으로 국내에서도 빛을 이용한 미디어아트를 water-front의 환경에 도입하여 지역의 아이덴티티를 강화하고 관광객들에게 특별한 인상을 남기고 있다. 그러나 국내의 환경디자인 분야에서는 영상의 영역에 대한 연구는 아직 미비한 실정이며, 지속적인 표현 개발의 필요성이 절실하다. 다양한 표현 기법 개발연구를 위해 미디어아트 활용이 영상 표현 기법의 대안으로 작용하길 기대한다.

• Geomechanics and Engineering
• /
• 제11권1호
• /
• pp.1-39
• /
• 2016

The finite element method (FEM), discrete element method (DEM), and Discontinuous deformation analysis (DDA) are among the standard numerical techniques applied in computational geo-mechanics. However, in some cases there no possibility for modelling by traditional finite analytical techniques or other mesh-based techniques. The solution presented in the current study as a completely Lagrangian and mesh-free technique is smoothed particle hydrodynamics (SPH). This method was basically applied for simulation of fluid flow by dividing the fluid into several particles. However, several researchers attempted to simulate soil-water interaction, landslides, and failure of soil by SPH method. In fact, this method is able to deal with behavior and interaction of different states of materials (liquid and solid) and multiphase soil models and their large deformations. Soil indicates different behaviors when interacting with water, structure, instrumentations, or different layers. Thus, study into these interactions using the mesh based grids has been facilitated by mesh-less SPH technique in this work. It has been revealed that the fast development, computational sophistication, and emerge of mesh-less particle modeling techniques offer solutions for problems which are not modeled by the traditional mesh-based techniques. Also it has been found that the smoothed particle hydrodynamic provides advanced techniques for simulation of soil materials as compared to the current traditional numerical methods. Besides, findings indicate that the advantages of applying this method are its high power, simplicity of concept, relative simplicity in combination of modern physics, and particularly its potential in study of large deformations and failures.

• 태양에너지
• /
• 제15권2호
• /
• pp.25-37
• /
• 1995

유입관성에 의한 유체혼합뿐 아니라 입구온도의 변화까지 고려된 성층축열조의 충전과정 모델에 대하여 해석적 근사해를 제시하였다. 해석모델은 깊이가 일정한 완전혼합 및 압출유동영역으로 구성되며, 입구온도의 변화는 중첩의 원리에 근거하여 계단함수로 근사화하였다. 완전혼합영역의 과도온도를 구한 후 함수형태에 따라 구분하고, 각각을 경계조건으로 하는 압출유동영역의 온도분포를 잘 정의된 함수의 항으로 유도하였다. 결과적으로 이들의 일차결합이 압출유동영역에 대한 최종해이다. 근사해의 타당성 및 결과의 유용성은 입구온도가 선형적으로 증가하는 경우에 대한 엄밀해와의 비교를 통하여 검증하였다. 계단수의 증가에 따라 근사해는 엄밀해로 급속히 접근하며, 유한한 수의 계단에 의한 근사해도 광범위한 혼합깊이에 대하여 엄밀해와 잘 일치한다. 또한, 혼합깊이가 클수록 소수의 계단에 의한 근사해로도 의미있는 예측결과를 얻을 수 있었다.

• 반도체디스플레이기술학회지
• /
• 제18권4호
• /
• pp.69-74
• /
• 2019

The aim of this work is to investigate the effect of the microtip length in a slot-die head on coating of a fine poly(3,4-ethylenedioxythiophene):poly(4-styrenesulfonate) (PEDOT:PSS) stripe. To this end, we have employed a meniscus guide with a 150-㎛-wide microtip and performed roll-to-roll slot-die coatings by varying its length between 500 ㎛ and 50 ㎛. When the microtip length is 150 ㎛ or shorter, we have observed three unexpected phenomena; 1) though the solution spreads much wider than the microtip width, yet the coated stripe width is almost the same as the microtip width, 2) the stripe width decreases, but the stripe thickness is rather increased with increasing coating speed at a fixed flow rate, 3) we obtain stripes much narrower than the microtip width at high coating speeds. It is due to the fact that 1) the meniscus is not well controlled by a short microtip, 2) the main stream of solution from the outlet is very close to the substrate and thus the distributed solution along the head lip merges with the main stream, and 3) the solution is not spread over the entire microtip end at high coating speeds, causing a tiny wobble in the meniscus. Using the 150-㎛-wide and 250-㎛-long microtip, we have fabricated 153-㎛-wide and 94-nm-thick PEDOT:PSS stripe at the maximum coating speed of 13 mm/s. To demonstrate its applicability in solution-processable organic light-emitting diodes (OLEDs), we have also fabricated an OLED device with the fine PEDOT:PSS stripe and obtained strong light emission from it.

• Safety and Health at Work
• /
• 제5권4호
• /
• pp.234-237
• /
• 2014

Background: Inhalation of asbestos fibers can lead to adverse health effects on the lungs. This study describes lung function profiles among individuals with nonmalignant asbestos-related disorders (ARDs). Methods: The study population was from the Workers' Compensation (Dust Diseases) Board of New South Wales, Sydney, Australia. Lung function measurements were conducted in males with asbestosis (n = 26), diffuse pleural thickening (DPT; n = 129), asbestosis and DPT (n = 14), pleural plaques only (n = 160) and also apparently healthy individuals with a history of asbestos exposure (n = 248). Standardized spirometric and single-breath diffusing capacity for carbon monoxide ($DL_{CO}$) measurements were used. Results: Mean age [standard deviation (SD)] was 66.7 (10.3) years for all participants. Current and ex-smokers among all participants comprised about 9.0% and 54.8%, respectively. Median pack-years (SD) of smoking for ex- and current-smokers were 22.7 (19.9). Overall 222 participants (38.6%) and 139 participants (24.2%) had forced expiratory volume in 1 second ($FEV_1$) and forced vital capacity (FVC) measurements < 80% predicted, and 217 participants (37.7%) had $FEV_1/FVC$ results < 70%. A total of 249 individuals (43.8%) had DLCO values < 80% predicted and only 75 (13.2%) had DLCO/VA results < 80% predicted. A total of 147 participants (25.6%) had peak expiratory flow (PEF) measurements < 80% predicted. The presence of ARDs lowered the lung function measurements compared to those of healthy individuals exposed to asbestos. Conclusion: Lung function measurement differs in individuals with different ARDs. Monitoring of lung function among asbestos-exposed populations is a simple means of facilitating earlier interventions.

• Nuclear Engineering and Technology
• /
• 제42권6호
• /
• pp.620-635
• /
• 2010

In this paper we describe current activities on the project Multi-Scale Modeling and Analysis of convective boiling (MSMA), conducted jointly by the Paul Scherrer Institute (PSI) and the Swiss Nuclear Utilities (Swissnuclear). The long-term aim of the MSMA project is to formulate improved closure laws for Computational Fluid Dynamics (CFD) simulations for prediction of convective boiling and eventually of the Critical Heat Flux (CHF). As boiling is controlled by the competition of numerous phenomena at various length and time scales, a multi-scale approach is employed to tackle the problem at different scales. In the MSMA project, the scales on which we focus range from the CFD scale (macro-scale), bubble size scale (meso-scale), liquid micro-layer and triple interline scale (micro-scale), and molecular scale (nano-scale). The current focus of the project is on micro- and meso-scales modeling. The numerical framework comprises a highly efficient, parallel DNS solver, the PSI-BOIL code. The code has incorporated an Immersed Boundary Method (IBM) to tackle complex geometries. For simulation of meso-scales (bubbles), we use the Constrained Interpolation Profile method: Conservative Semi-Lagrangian $2^{nd}$ order (CIP-CSL2). The phase change is described either by applying conventional jump conditions at the interface, or by using the Phase Field (PF) approach. In this work, we present selected results for flows in complex geometry using the IBM, selected bubbly flow simulations using the CIP-CSL2 method and results for phase change using the PF approach. In the subsequent stage of the project, the importance of effects of nano-scale processes on the global boiling heat transfer will be evaluated. To validate the models, more experimental information will be needed in the future, so it is expected that the MSMA project will become the seed for a long-term, combined theoretical and experimental program.

• 분석과학
• /
• 제34권5호
• /
• pp.212-224
• /
• 2021

The intent of the present work was to develop a simple, sensitive, accurate, precise, rapid and economical UV- spectrophotometric and reverse phase high pressure liquid chromatographic method for the simultaneous estimation of Spironolactone and Furosemide in bulk and combined tablet dosage forms. UV-Spectrophotometry was carried out by simultaneous equation method using 0.02 M potassium dihydrogen phosphate buffer pH 3.5: Acetonitrile (50:50) v/v as a solvent. The linearity range was 2-14 ㎍ mL^-1 for Spironolactone and Furosemide with a correlation coefficient > 0.99. The chromatographic separation was achieved on 250 mm × 4.6 mm, hypersil BDS C18 column with particle size 5 ㎛, by using an isocratic mixture of 0.02 M potassium dihydrogen phosphate buffer pH 3.5: Acetonitrile: tert butyl methyl ether (49:50:1) v/v/v as a solvent at a flow rate of 1 mL min^-1 and UV detection was carried out at 254 nm. The retention time were observed to be 3.666 and 6.661 minutes for Furosemide and Spironolactone respectively. The two developed methods were validated according to the ICH guidelines for accuracy, precision, linearity, LOD, LOQ and were found to be within the limits. It can be concluded that these two methods could be successfully used for the simultaneous estimation of Spironolactone and Furosemide in bulk and combined tablet dosage forms.