조지훈은 해방 이후 한용운에 대한 인식을 주도적으로 생산한 논자이다. 그는 한용운을 민족시인으로, 그의 시를 저항적 민족시의 한 전형으로 평가함으로써 한용운에 대한 현재적 인식의 시각과 방법을 제시하였다. 여기에서는 조지훈이 남긴 세 편의 '한용운론'을 분석하면서, 한용운에 대한 조지훈의 인식이 어떻게 논리화되었는지 살펴보았다. 이를 위해 시인론과 작품론에 대한 인식을 분리하고, 각각의 인식이 조지훈의 역사인식 및 문학인식과 어떤 정합성을 갖는지에 대해 추적해 보았다. 그 결과, 조지훈이 한용운의 생애와 작품을 파악하는 인식의 근저에는 정신사로서의 세계인식이 전제되어 있었다는 점, 절대가치로 상정된 민족이 이질적인 차이들을 봉합하는 논리였다는 점, 민족정신과 시의 결합이 시인지사론(詩人志士論)과 민족시의 논리로 표출되었다는 점을 파악할 수 있었다. 또한 그의 논리에는 인권과 민족주권의 결합, 민족과 선(禪)의 결합으로 인한 논리적 균열이 내재해 있으며, 시인의 사명에 대한 다른 가능성이 충분히 논리화되지 못한 채 미완인 채로 논의가 끝나버렸음을 밝혔다.
Background: Emerging reports suggest the potential for adverse health effects from exposure to emissions from some additive manufacturing (AM) processes. There is a paucity of real-world data on emissions from AM machines in industrial workplaces and personal exposures among AM operators. Methods: Airborne particle and organic chemical emissions and personal exposures were characterized using real-time and time-integrated sampling techniques in four manufacturing facilities using industrial-scale material extrusion and material jetting AM processes. Results: Using a condensation nuclei counter, number-based particle emission rates (ERs) (number/min) from material extrusion AM machines ranged from $4.1{\times}10^{10}$ (Ultem filament) to $2.2{\times}10^{11}$ [acrylonitrile butadiene styrene and polycarbonate filaments). For these same machines, total volatile organic compound ERs (${\mu}g/min$) ranged from $1.9{\times}10^4$ (acrylonitrile butadiene styrene and polycarbonate) to $9.4{\times}10^4$ (Ultem). For the material jetting machines, the number-based particle ER was higher when the lid was open ($2.3{\times}10^{10}number/min$) than when the lid was closed ($1.5-5.5{\times}10^9number/min$); total volatile organic compound ERs were similar regardless of the lid position. Low levels of acetone, benzene, toluene, and m,p-xylene were common to both AM processes. Carbonyl compounds were detected; however, none were specifically attributed to the AM processes. Personal exposures to metals (aluminum and iron) and eight volatile organic compounds were all below National Institute for Occupational Safety and Health (NIOSH)-recommended exposure levels. Conclusion: Industrial-scale AM machines using thermoplastics and resins released particles and organic vapors into workplace air. More research is needed to understand factors influencing real-world industrial-scale AM process emissions and exposures.
본 연구는 미투 운동 이후 시작된 문화예술계 성 인권 보호 제도의 흐름을 점검하고 이에 대한 개선 방향을 제안하는 것을 목표로 한다. 그동안 정부에서는 '범정부 합동 대책', '문화예술계 성희롱·성폭력 특별조사단 권고', '문화체육관광부 성희롱·성폭력 예방대책위원회의 1·2차 권고', '문화비전 2030'를 발표하고, 이를 토대로 문화예술계의 성 인권 보호 제도를 설계했다. 이후 시행된 제도는 구체적으로 피해자 보호, 가해자 제재, 예방·방지책 마련, 법적 근거 및 제도 틀 개선의 4가지 범주로 분류할 수 있었다. 하지만 정부의 다각적인 노력에도 불구하고 현장에서는 제도의 실효성이 높지 않다는 비판이 끊임없이 제기됐다. 피해 당사자의 목소리로 말미암아 성평등 문화정책이 진척을 이룬지 2년이 흐른 지금, 현장에서 진정한 변화를 만들어내기 위해서는 현행 제도의 진단과 개선 방향에 관한 논의가 필요한 시점이다. 이를 위해 정부 발간자료 등을 기반으로 한 문헌 연구와 정책 기획·실행 단계의 주요 행위자 9명과의 인터뷰 내용을 바탕으로 한 면접 분석연구를 진행했다. 인터뷰 내용 분석에는 질적 연구 분석 프로그램인 MAXQDA를 활용했다. 연구 결과 제도의 범주별로 각각 5~10가지 문제점이 드러났다. 문제 해결을 위해 인터뷰이들이 제시한 개선 방향에서는 긴밀한 연관 관계가 확인됐다. 이는 성 인권 보호를 위한 제도가 유기적으로 연결되어야 효과를 낼 수 있음을 시사한다.
사이버 공간에서 이루어지는 전투 행위가 군의 주요 임무체계 및 무기체계에 어떠한 영향을 미치는지를 평가할 수 있어야 한다. 사이버공격에 의한 임무영향을 사이버 M&S로 분석하기 위해서는 대상이 되는 임무체계와 사이버전 요소를 모델로 구축하고, 시뮬레이션을 위한 시나리오를 저작하여야 한다. 사이버전에 의한 임무영향 분석 관련 연구는 미국을 중심으로 많은 연구가 수행되었으며, 기존의 연구에서는 물리전장과 사이버전장에 대해 별개로 시나리오를 저작하였다. 임무영향 분석의 정확도를 높이기 위해서는 물리전장 모델과 사이버전장 모델을 결합한 시뮬레이션 환경을 구축하고, 임무 시나리오와 사이버공격/방어 시나리오를 통합해서 저작할 수 있어야 한다. 또한 물리전장과 사이버전장은 업무영역이 상이함을 고려하여 시나리오를 효율적으로 저작할 수 있는 방법이 필요하다. 본 논문에서는 임무체계 정보를 이용하여 시나리오 저작에 필요한 자료를 사전에 작성하고, 선작업된 자료를 이용하여 통합시나리오를 저작하는 방법을 제안한다. 제안한 방법은 시나리오 저작도구의 설계에 반영하여 개발하고 있으며, 제안 방법을 입증하기 위해 대화력전 분야의 통합시나리오 저작을 수행하였다. 향후, 제안한 방법을 반영한 시나리오 저작도구를 활용하면 임무영향 분석을 위한 통합시나리오를 짧은 시간에 쉽게 저작할 수 있게 될 것이다.
Objectives: This study was intended to investigate the revision status of the occupational exposure standards for aluminum at home and abroad; to investigate worker exposure at domestic aluminum manufacturing and handling workplaces; to conduct social and economic evaluation for the revision of domestic aluminum exposure limits. Methods: We investigated the current status of occupational exposure limits for aluminum at home and abroad, and analyzed supporting data. An exposure survey was conducted targeting domestic aluminum manufacturing and handling workplaces. Based on these, revised aluminum occupational exposure limits were proposed. Results: The major aluminum exposure limits at home and abroad show a notable difference. The toxicity of aluminum, which was revealed through animal experiments and epidemiological investigations. The average concentration of aluminum in the air at 12 workplaces was 0.016 mg/m3, and the maximum was 0.0776 mg/m3. When total dust and respiratory dust were measured side by side and simultaneously for the same process, 12.1% of the total mass concentration of aluminum dust was respiratory dust. As a result of measuring and comparing the size distribution of dust with an optical particle counter in real time, 48.1% of the total dust in the form of welding fume and pyro-powder was respiratory dust. Based on the literature review and workplace survey, three proposals for changing the aluminum exposure limit were proposed. Proposal (1): For all types, 10 mg/m3 is unified as the exposure limit except for soluble salts and alkyls. Proposal (2): 1(R) mg/m3 as the exposure limit for all forms except soluble salts and alkyl. Proposal (3): 1(R) mg/m3 for pyro-powder and welding fume, and 10 mg/m3 for metal dust, aluminum oxide, and insoluble compounds as exposure standards. A pyro-powder was defined as dry aluminum powder of 200 mesh size (74 ㎛) or smaller (larger size classified as metal dust). Reason for setting: In the workplace survey, the ratio of respiratory dust to total dust was analyzed to be about 1:10, so it was judged that the domestic standard and the ACGIH standard were compatible. Conclusions: In all scenarios according to the revision of the exposure standard, the B/C ratio was greater than 1 or only benefits existed, so it was evaluated as sufficiently reasonable as a result of the socio-economic evaluation.
A study was carried out from October 1977 to September 1978 in order to develope health care delively system which will meet to rural area in Korea. For the study objective a model of health care delivery system of Myun (township) area was developed which is adopted the net-work of village health voluntary worker who will play the role of bridge for communication related with health and illness between families or village people and health subcenter, and :he model health care delivery system net-work was set in the area of Soodong Myun, Yangju Gun. which is the rural health demonstration area of Ewha Womans University since 1972. The activities and attitude of 22 village health voluntary workers were observed and analized. during the study period. The results are as follows; 1. For the field activities of village health voluntary workers. a guide line which is described with specific behavioral objectives was developed and used for not only training of the workers but also evaluation of their field activities. 2. During the study period, the number of 971 village people were served primary health care service by village health voluntary worker and the service was classified largely into symptomatic medications (92%) and preventive measures (8%). 3. Comparative percentage of the number of 894 symptomatic cases cared by village health voluntary workers to 5,695 cases of patient treated by Soodong Health Subcenter during the same period was 15.7%. 4. Annual utility rate of village health voluntary worker by Myun total people was 16.1% but utility rate by Rie was varied from 38.2% to 2.8% which shown there were considerable differences in each Rie. In order to settle the village health care service, the obstructive factors of utility should be detected and their counter measure must be taken. 5. As the health need of village people increases, it is expected that the supplement of drug excluding present sit basic drugs is inevitable, but considering the ability of village health voluntary worker, the selection of additional drugs and education, plan should be carefully studied. 6. It is desirable that a financial resource for supplementary purchase of first aid kit, drugs and materials whould be alloted from village public fund like Saemaeul Women's Club fund, which has already practiced in a few villages in the study area. 7. As pointed out by village health voluntary workers, in order to improve the village health, village leaders should be in the center of it and the cooperation of whole village people is a core of healthful village development, and it is reasonable that the health subcenter backs up these voluntary health activities by village people in techniques. 8. It seems effective that a supplementary education for village health voluntary worker be accomplished by a planned education through regular meetings like worker's monthly meeting and irregular post guide when Myun Health Workers can handle the problems found during the round trip of villages. 9. It is desirable that village health voluntary workers, who are recommended by a civil voluntary organization like Saemael Woman's Club, are charged by natural villagc unit, are given a function of village health care service and used through basic education at health subcenter. 10. It is advisable that the village health voluntary worker's service is compensated not by a form of money, but by other way such as an exemption of medical fee of worker herself or her families in health subcenter can be one method. 11. Daily health activities of each village health voluntary worker should be reported to health subcenter by biweekly or monthly in order to get not only for basic data of the program but also for evaluation the program. It is recomandable that the report form should be simple and clear enough for village health voluntary worker to fill it effectively. 12. Village health care service should be developed into a Saemaeul Movement in which village people actively participate. For this, the appointed function of village health voluntary worker should be absorbed into those of living Environment Betterment Section or Family Planning Section of Saemaeul Women's Club or it is desirable that establish a new section, Village Health Promoting Section and make it involve the appointed functions of those sections mentioned above.
현재 국내에도 건물의 특성에 알맞은 가변적이며 대공간 확보가 가능하고 사용부재의 두께가 수mm에서 100mm에 이르는 극후판 두께의 건축 철골구조의 건축물 및 Box형 강재교량으로 구축되는 사례가 증가하면서 철골부재의 제작 및 가공기술이 예전보다 더욱 향상되고 구조물로서의 품질관리에 대한 신뢰성의 요구도 증가되고 있는 실정이다, 그러나 국내의 철골조 건축부재의 구조설계는 설계사대로 각기 이루어지고 해당 부재는 공장별로 제작진행되어 그 기술수준에는 보이지 않는 상당한 격차가 있다고 보여지며 업체별로 경제성 등을 고려하여 기본적이며 일반적 철골제작기법을 간결하게 적용하는 것에 머물러 고도한 선진적인 기술의 채용은 대부분 주저할 수 밖에 없는 상황이다 또한, 중소규모의 빌딩 건축물들의 철골조 설계적용을 고려해볼 때 수많은 접합부의 표준화를 비롯하여 구조체 전체의 표준화 및 내$\cdot$외장재까지 포함된 시스템건축의 건축물설계와 부재의 제작 및 설치기술 개발경향도 엿보이고 있는 가운데 특히, 철골부재의 공장제작과 현장설치의 보다 경제적이고 짧은 공기내에 완전한 품질을 확보할 수 있는 부재간의 접합부 설계에 대한 연구검토는 철골분야에 종사하는 업계는 물론 현장 관계자에게도 의미있는 일일 것이다. 본 논문에서는 철골조 건축물의 특성을 알아보고 철골구조물 공장제작 및 현장설치공기를 최대한 단축할 수 있는 철골기둥과 기둥, 기둥과 큰보부재 접합부 변경사례 및 Box Column의 용접자동화, 로봇화에 의한 철골기둥 부재제작사례와 금후 철골구조물 제작상의 문제점과 대응방안에 대하여 서술하고자 한다.
Recently the request of the patients to participate in the medical courses has been expanding due to the elevated sense of right on the people's health, merchandised medical treatment by mass supply, human right declaration of the patients, generalized medical informations by the mass media and the change of human relation between the medical personnels and the patients. Under these phenomena the patients have been in the thought of solving such accidents only by regulation of the laws which they think to be all powerful, Such trends are same in the area of nursing service. Also today the accident by the nurses have been increasing by the area of the nurses having been expanded and their independent roles having been increased. Such nursing accidents are the important subject which the professional occupation of the nurse has been facing but legal protective capability of the nurses has been very weak. Therefore this study has examined the degree of the experience of the nursing accident that happens in the clinical nursing scenes in the general hospital to provide the basic materials for the protection and the counter measures of the nursing accident. The following is the conclusion based by the above examination. 1) The experience degree of the whole nursing accidents has been appeared as 1.90 in average. And the degree according to service area has been 1.77 in the area of supervising management of patients, 1.54 in the area of the same management of patients by head-nurses, 1.84 in the area of doctors' treatment performances, 14 in the enforcement and education areas of the nursing technology, 2.04 in the area of observing patients and judgement and 2.07 in the area of nursing records and maintaining confidentials. Accordingly there has been higher degree of accidental experiences in the independent service areas of the patients than in the dependent ones directed by the doctors. 2) The perception of the nurses showed that the cause of the nursing accident has been due to the heavy work of the nurses with the 60.4% of the response rate, the highest rate. They report the accident to the head nurse first by 2/3 nurses after accident. And the hour of the accident has been frequently happened regardless of service hours with 48.1% in response rate, the highest rate, and the nursing accident happens in the night more than the daytime with the rate of 37.5% at night while 14. 4% daytime. 3) The nurses are in the perception that the patients are responsible for the accident with 48.2% response rate while 43.9% rate in response showed that it has been caused by many people. They are in the perception that 41.7% when the nursing power was lacking, 46.7% lower recognition of actual state about indivitual patient in the section of technical speciality and 35.8% when the patients were not cooperative and 37.8% when the wards were dirty and in disorder. 4) the attitude of the patients after the various nursing accidents has been violent words in 72.7%, violence in 17.4% and 3.9% in attending the court by the sue of the patient's side(18 nurses). 5) The action of the hospital has been : requesting the submission of the story of the accident in 22.8%, the report of the accidents in 14.4%, thus the written statement disposal was most, 4.5% was the transfer to the other departments when the accident was larger or the patients' guardians protested strongly and 0.6% of the dismissals of the nurses. 6) In regard to the responsiblity of the nurse accidents, 78.9% was the highest rate of supplying the nursing manpowers, 48.4% of mutual cooperation of the medical personnels, 37.2% of strengthening the education for the nurses and hospital facilities reformation in 32.7%. 7) The review of relation between the general characters of the object of the study and the degree of experience of nursing accidents showed the significant differences in ages (F=4.04, p=0.000).
It is understood that drum speed of threshers and the moisture content of paddy grains to be threshed, respectively, have a signific:mt effect upon rice recoveries. Threshing under an increased drum speed would give a high performance rate, which is the general practice in custom work threshing in association with the use of semiauto-t hreshers. In the connection, however, it may result in the promotion of grain cracks and brokens of the rice product after milling. No reference or determination for an opti mum drum speed of the thresher is made available for various grain moisture contents at the time of the threshing operation and for different rice varieties especially for the Tongil rice varieties. This study was Conducted to find out and determine effects of the drum speeds on grain losses. The grain loss was quantified in terms of recovery rates of rice grains after treatments. Samples of each of all treatments were taken from the grain sampling plate placed in the grain conveyor of threshers. The grain sample plate was specially provided for this experiment. The brown-rice, milling, and head-rice recJveries were tes ted in the laboratory mill, respectively. Two rice varieties, Akibare and Suweon 251, each with five levels of different moist\ulcornerure contents at harvest and six levels of different drum speeds of threshers, were selected and used for treatments in this experiment. Two conditions of materials were tested in the thresher. One condition was to thresh the experimental material immediately after cutting, referred to as the wet-material thr eshing in this study. The other was to thresh the experimental :material, dried to contain about 15-16 percent of the grain moisture under the shocking operation. This is referred to as the dry-material threshing in this study. In additioon, field measurements for the grain moistures and drum-sdeeds under actual operation practices of the traditional field threshing, were conducted with a view to comparing with results of the experimental treatments. The results of the study may be summarized as follows: 1. For threshing treatments of Japonica-type rice variety (Akibare) , the effect of drum speeds and levels of grain moisture at cutting upon brown-rice, milling, and head-rice recoveries were found statistically significant. No significant difference in these recovery rates was noticed regardless of whether the material was threshed right after cutting or after drying by the shocking operation. 2. For the Tongil-sister rice variety(Suweon 251), milling recovery for the varied drum-speed and the grain~moisture level at cutting was found statististically significant. Th milling recovery was much significant when associated with the wet-material thres\ulcornerhing compared to the dry-material threshing. 3. The optimum peripheral velocity to be maintained at the edge of teeth on the thr\ulcorneresher drum was determined and may be recommanded as that of about 12 to 13 meters per second in view of the maximum recovery rate of the milled rice. 4. The effect of the drum speed on the qualitative loss of the milled rice was much greater in the case of the Tongil variety than Japonica. This effect was also greater by the wet-material threshing than by the dry-material threshing. Therefore, to apply the wet-material threshing operation for the Tongil variety, in particular, it should be very important to introduce the kind of threshing technology which would maintain the drum speed at optimum. 5. A field survey for the actual drum speed of threshing operations for 50 threshers indicated that average peripheral velccity was 12.76m/sec., and that the range was from 10.50 to 14.90m/sec. Approximately, more than 30% of the experimented and measured threshers were being operated at speeds which exceeded the optimum speed determined and assessed in this study. Accordingly, it should be highly desirable and important to take counter-measures against these threshing practices of operational overspeed.
It is understood that drum speed of threshers and the moisture content of paddy grains to be threshed, respectively, have a signific:mt effect upon rice recoveries. Threshing under an increased drum speed would give a high performance rate, which is the general practice in custom work threshing in association with the use of semiauto-t hreshers. In the connection, however, it may result in the promotion of grain cracks and brokens of the rice product after milling. No reference or determination for an opti mum drum speed of the thresher is made available for various grain moisture contents at the time of the threshing operation and for different rice varieties especially for the Tongil rice varieties. This study was Conducted to find out and determine effects of the drum speeds on grain losses. The grain loss was quantified in terms of recovery rates of rice grains after treatments. Samples of each of all treatments were taken from the grain sampling plate placed in the grain conveyor of threshers. The grain sample plate was specially provided for this experiment. The brown-rice, milling, and head-rice recJveries were tes ted in the laboratory mill, respectively. Two rice varieties, Akibare and Suweon 251, each with five levels of different moist?ure contents at harvest and six levels of different drum speeds of threshers, were selected and used for treatments in this experiment. Two conditions of materials were tested in the thresher. One condition was to thresh the experimental material immediately after cutting, referred to as the wet-material thr eshing in this study. The other was to thresh the experimental :material, dried to contain about 15-16 percent of the grain moisture under the shocking operation. This is referred to as the dry-material threshing in this study. In additioon, field measurements for the grain moistures and drum-sdeeds under actual operation practices of the traditional field threshing, were conducted with a view to comparing with results of the experimental treatments. The results of the study may be summarized as follows: 1. For threshing treatments of Japonica-type rice variety (Akibare) , the effect of drum speeds and levels of grain moisture at cutting upon brown-rice, milling, and head-rice recoveries were found statistically significant. No significant difference in these recovery rates was noticed regardless of whether the material was threshed right after cutting or after drying by the shocking operation. 2. For the Tongil-sister rice variety(Suweon 251), milling recovery for the varied drum-speed and the grain~moisture level at cutting was found statististically significant. Th milling recovery was much significant when associated with the wet-material thres?hing compared to the dry-material threshing. 3. The optimum peripheral velocity to be maintained at the edge of teeth on the thr?esher drum was determined and may be recommanded as that of about 12 to 13 meters per second in view of the maximum recovery rate of the milled rice. 4. The effect of the drum speed on the qualitative loss of the milled rice was much greater in the case of the Tongil variety than Japonica. This effect was also greater by the wet-material threshing than by the dry-material threshing. Therefore, to apply the wet-material threshing operation for the Tongil variety, in particular, it should be very important to introduce the kind of threshing technology which would maintain the drum speed at optimum. 5. A field survey for the actual drum speed of threshing operations for 50 threshers indicated that average peripheral velccity was 12.76m/sec., and that the range was from 10.50 to 14.90m/sec. Approximately, more than 30% of the experimented and measured threshers were being operated at speeds which exceeded the optimum speed determined and assessed in this study. Accordingly, it should be highly desirable and important to take counter-measures against these threshing practices of operational overspeed.
이메일무단수집거부
본 웹사이트에 게시된 이메일 주소가 전자우편 수집 프로그램이나
그 밖의 기술적 장치를 이용하여 무단으로 수집되는 것을 거부하며,
이를 위반시 정보통신망법에 의해 형사 처벌됨을 유념하시기 바랍니다.
[게시일 2004년 10월 1일]
이용약관
제 1 장 총칙
제 1 조 (목적)
이 이용약관은 KoreaScience 홈페이지(이하 “당 사이트”)에서 제공하는 인터넷 서비스(이하 '서비스')의 가입조건 및 이용에 관한 제반 사항과 기타 필요한 사항을 구체적으로 규정함을 목적으로 합니다.
제 2 조 (용어의 정의)
① "이용자"라 함은 당 사이트에 접속하여 이 약관에 따라 당 사이트가 제공하는 서비스를 받는 회원 및 비회원을
말합니다.
② "회원"이라 함은 서비스를 이용하기 위하여 당 사이트에 개인정보를 제공하여 아이디(ID)와 비밀번호를 부여
받은 자를 말합니다.
③ "회원 아이디(ID)"라 함은 회원의 식별 및 서비스 이용을 위하여 자신이 선정한 문자 및 숫자의 조합을
말합니다.
④ "비밀번호(패스워드)"라 함은 회원이 자신의 비밀보호를 위하여 선정한 문자 및 숫자의 조합을 말합니다.
제 3 조 (이용약관의 효력 및 변경)
① 이 약관은 당 사이트에 게시하거나 기타의 방법으로 회원에게 공지함으로써 효력이 발생합니다.
② 당 사이트는 이 약관을 개정할 경우에 적용일자 및 개정사유를 명시하여 현행 약관과 함께 당 사이트의
초기화면에 그 적용일자 7일 이전부터 적용일자 전일까지 공지합니다. 다만, 회원에게 불리하게 약관내용을
변경하는 경우에는 최소한 30일 이상의 사전 유예기간을 두고 공지합니다. 이 경우 당 사이트는 개정 전
내용과 개정 후 내용을 명확하게 비교하여 이용자가 알기 쉽도록 표시합니다.
제 4 조(약관 외 준칙)
① 이 약관은 당 사이트가 제공하는 서비스에 관한 이용안내와 함께 적용됩니다.
② 이 약관에 명시되지 아니한 사항은 관계법령의 규정이 적용됩니다.
제 2 장 이용계약의 체결
제 5 조 (이용계약의 성립 등)
① 이용계약은 이용고객이 당 사이트가 정한 약관에 「동의합니다」를 선택하고, 당 사이트가 정한
온라인신청양식을 작성하여 서비스 이용을 신청한 후, 당 사이트가 이를 승낙함으로써 성립합니다.
② 제1항의 승낙은 당 사이트가 제공하는 과학기술정보검색, 맞춤정보, 서지정보 등 다른 서비스의 이용승낙을
포함합니다.
제 6 조 (회원가입)
서비스를 이용하고자 하는 고객은 당 사이트에서 정한 회원가입양식에 개인정보를 기재하여 가입을 하여야 합니다.
제 7 조 (개인정보의 보호 및 사용)
당 사이트는 관계법령이 정하는 바에 따라 회원 등록정보를 포함한 회원의 개인정보를 보호하기 위해 노력합니다. 회원 개인정보의 보호 및 사용에 대해서는 관련법령 및 당 사이트의 개인정보 보호정책이 적용됩니다.
제 8 조 (이용 신청의 승낙과 제한)
① 당 사이트는 제6조의 규정에 의한 이용신청고객에 대하여 서비스 이용을 승낙합니다.
② 당 사이트는 아래사항에 해당하는 경우에 대해서 승낙하지 아니 합니다.
- 이용계약 신청서의 내용을 허위로 기재한 경우
- 기타 규정한 제반사항을 위반하며 신청하는 경우
제 9 조 (회원 ID 부여 및 변경 등)
① 당 사이트는 이용고객에 대하여 약관에 정하는 바에 따라 자신이 선정한 회원 ID를 부여합니다.
② 회원 ID는 원칙적으로 변경이 불가하며 부득이한 사유로 인하여 변경 하고자 하는 경우에는 해당 ID를
해지하고 재가입해야 합니다.
③ 기타 회원 개인정보 관리 및 변경 등에 관한 사항은 서비스별 안내에 정하는 바에 의합니다.
제 3 장 계약 당사자의 의무
제 10 조 (KISTI의 의무)
① 당 사이트는 이용고객이 희망한 서비스 제공 개시일에 특별한 사정이 없는 한 서비스를 이용할 수 있도록
하여야 합니다.
② 당 사이트는 개인정보 보호를 위해 보안시스템을 구축하며 개인정보 보호정책을 공시하고 준수합니다.
③ 당 사이트는 회원으로부터 제기되는 의견이나 불만이 정당하다고 객관적으로 인정될 경우에는 적절한 절차를
거쳐 즉시 처리하여야 합니다. 다만, 즉시 처리가 곤란한 경우는 회원에게 그 사유와 처리일정을 통보하여야
합니다.
제 11 조 (회원의 의무)
① 이용자는 회원가입 신청 또는 회원정보 변경 시 실명으로 모든 사항을 사실에 근거하여 작성하여야 하며,
허위 또는 타인의 정보를 등록할 경우 일체의 권리를 주장할 수 없습니다.
② 당 사이트가 관계법령 및 개인정보 보호정책에 의거하여 그 책임을 지는 경우를 제외하고 회원에게 부여된
ID의 비밀번호 관리소홀, 부정사용에 의하여 발생하는 모든 결과에 대한 책임은 회원에게 있습니다.
③ 회원은 당 사이트 및 제 3자의 지적 재산권을 침해해서는 안 됩니다.
제 4 장 서비스의 이용
제 12 조 (서비스 이용 시간)
① 서비스 이용은 당 사이트의 업무상 또는 기술상 특별한 지장이 없는 한 연중무휴, 1일 24시간 운영을
원칙으로 합니다. 단, 당 사이트는 시스템 정기점검, 증설 및 교체를 위해 당 사이트가 정한 날이나 시간에
서비스를 일시 중단할 수 있으며, 예정되어 있는 작업으로 인한 서비스 일시중단은 당 사이트 홈페이지를
통해 사전에 공지합니다.
② 당 사이트는 서비스를 특정범위로 분할하여 각 범위별로 이용가능시간을 별도로 지정할 수 있습니다. 다만
이 경우 그 내용을 공지합니다.
제 13 조 (홈페이지 저작권)
① NDSL에서 제공하는 모든 저작물의 저작권은 원저작자에게 있으며, KISTI는 복제/배포/전송권을 확보하고
있습니다.
② NDSL에서 제공하는 콘텐츠를 상업적 및 기타 영리목적으로 복제/배포/전송할 경우 사전에 KISTI의 허락을
받아야 합니다.
③ NDSL에서 제공하는 콘텐츠를 보도, 비평, 교육, 연구 등을 위하여 정당한 범위 안에서 공정한 관행에
합치되게 인용할 수 있습니다.
④ NDSL에서 제공하는 콘텐츠를 무단 복제, 전송, 배포 기타 저작권법에 위반되는 방법으로 이용할 경우
저작권법 제136조에 따라 5년 이하의 징역 또는 5천만 원 이하의 벌금에 처해질 수 있습니다.
제 14 조 (유료서비스)
① 당 사이트 및 협력기관이 정한 유료서비스(원문복사 등)는 별도로 정해진 바에 따르며, 변경사항은 시행 전에
당 사이트 홈페이지를 통하여 회원에게 공지합니다.
② 유료서비스를 이용하려는 회원은 정해진 요금체계에 따라 요금을 납부해야 합니다.
제 5 장 계약 해지 및 이용 제한
제 15 조 (계약 해지)
회원이 이용계약을 해지하고자 하는 때에는 [가입해지] 메뉴를 이용해 직접 해지해야 합니다.
제 16 조 (서비스 이용제한)
① 당 사이트는 회원이 서비스 이용내용에 있어서 본 약관 제 11조 내용을 위반하거나, 다음 각 호에 해당하는
경우 서비스 이용을 제한할 수 있습니다.
- 2년 이상 서비스를 이용한 적이 없는 경우
- 기타 정상적인 서비스 운영에 방해가 될 경우
② 상기 이용제한 규정에 따라 서비스를 이용하는 회원에게 서비스 이용에 대하여 별도 공지 없이 서비스 이용의
일시정지, 이용계약 해지 할 수 있습니다.
제 17 조 (전자우편주소 수집 금지)
회원은 전자우편주소 추출기 등을 이용하여 전자우편주소를 수집 또는 제3자에게 제공할 수 없습니다.
제 6 장 손해배상 및 기타사항
제 18 조 (손해배상)
당 사이트는 무료로 제공되는 서비스와 관련하여 회원에게 어떠한 손해가 발생하더라도 당 사이트가 고의 또는 과실로 인한 손해발생을 제외하고는 이에 대하여 책임을 부담하지 아니합니다.
제 19 조 (관할 법원)
서비스 이용으로 발생한 분쟁에 대해 소송이 제기되는 경우 민사 소송법상의 관할 법원에 제기합니다.
[부 칙]
1. (시행일) 이 약관은 2016년 9월 5일부터 적용되며, 종전 약관은 본 약관으로 대체되며, 개정된 약관의 적용일 이전 가입자도 개정된 약관의 적용을 받습니다.