• Journal of the Korea Furniture Society
• /
• v.28 no.1
• /
• pp.53-59
• /
• 2017

Wooden dowels are commonly used to join the particleboard members together in many types of structures, But little information is available concerning their holding properties in domestic particleboard. This study was performed to determine the withdrawal loads and strengths on the effect of diameter of dowel and hole clearance. The test block was manufactured from 15 mm thick domestic particleboard. The dowel was manufactured 6, 8 and 10 mm diameters from korean castanea, korean pine and tuliptree. Research reported here indicates that withdrawal loads increase, but withdrawal strengths decrease, as the dowel diameter increases. This study also indicates that dowel withholding load and strength for particleboard less decrease than those for domestic wood as a hole clearance decreases.

• Journal of the Korea Furniture Society
• /
• v.13 no.1
• /
• pp.9-17
• /
• 2002

Laminated lumber is an engineered wood products using stress rated, seasoned and selected lumber. Each piece of lumber is graded, and then end jointed to produce the required length. This study was carried out to investigate the possibility of wooden artifacts with laminated lumber. It is expected through this research that wooden artifacts, which have originality and local character, can be developed by making design of wooden artifacts through the use of plentiful resources around the local area. A development of new design products, an improvement of distributive structure and the achievement of international competitiveness will contribute to develop the industrial artifacts art in Korea. And, it is necessary to develop a corporation system between industrial craft companies and universities.

• Journal of the Korean Wood Science and Technology
• /
• v.52 no.3
• /
• pp.243-261
• /
• 2024

In this study, samples were collected from various ancient wooden shipwrecks, including the Shinan shipwreck and Jindo shipwreck that used iron nails, the Yeongheungdo shipwreck carrying iron artifacts, as well as the Sibidongpado shipwreck and Wando shipwreck where degradation products were not observed, all of which were salvaged by the National Research Institute of Maritime Heritage. The aim was to analyze the characteristics of degradation products generated by iron (Fe) within the salvaged wooden shipwreck materials and establish fundamental data on degradation products in waterlogged archaeological wood. The analysis revealed that sulfur (S) is generally accumulated in wood obtained from marine environments. It was observed that the content of inorganic substances such as iron and sulfur was significantly higher in the Shinan shipwreck, Jindo shipwreck, and Yeongheungdo shipwreck compared to Sibidongpado shipwreck and Wando shipwreck, which used wooden nails. This indicates that the presence of iron affects the accumulation of degradation products and suggests that iron is a factor in the corrosion of wood. Furthermore, crystallin compounds were observed within the cell walls, and higher concentrations of iron and sulfur were found in the resin ducts, rays, and radial tissues. This suggests that during desalination and consolidation treatments, warm water or polyethylene glycol (PEG) may move degradation factors into resincanals, rays, radial tissues, etc.

• Journal of the Korean Wood Science and Technology
• /
• v.42 no.5
• /
• pp.590-596
• /
• 2014

Wooden cultural heritages of Korea have been destroyed by fire in many cases. As a result, a number of methods to protect wooden cultural properties against fire were introduced. A way of protecting wooden cultural properties installations of fire equipments such as sprinkler, fire alarm system, or fire extinguisher. Another way of protecting wooden cultural properties is to treat them with flame retardants for their safety. Development of a very effective flame retardant with a good performance without affecting danchung and wood quality is required. At the same time, methods of evaluating flame retardant treated woods should be devised to assess their efficacy. In this study, combustion characteristics using cone-calorimeter, limit oxygen index, moisture absorption, iron corrosive and weathering were analyzed to evaluate the flame resistance efficacy and performance of flame retardants treated woods. The evaluation methods of flame retardants for wooden cultural heritage were suggested.

• Journal of the Korean Wood Science and Technology
• /
• v.33 no.2 s.130
• /
• pp.1-7
• /
• 2005

Tree species of wooden structural members of the Beomeo Temple were identified based on light and scanning electron microscopic characters in the present study. Of 10 structural members, 9 softwoods and 1 hardwood were identified. Among softwood members, 7 belonged to hard pine of the Sylvestris section, and the remaining 2 to hard pine of other than the Sylvestris section and hemlock of the genus Tsuga, respectively. A single hardwood member was identified as white oak of the Prinus section under the subgenus Lepidobalanus.

• Journal of the Korea Furniture Society
• /
• v.27 no.1
• /
• pp.8-14
• /
• 2016

Increasing concerns of environment need to make change furniture field to more environmentally friendly approach, such as reuse of by-products from wooden products. As it is, the methods of recycling wood for industrial purposes have the advantage of productivity and adaptability. However, the industrial way is required a certain production facility of processing wooden by-products and has possible hygienic problems due to contaminated sources. Many designers have developed their own methods for reuse of wood in unique and artistic ways. Even so, because of confined sources, it could be not enough supply. Therefore, I developed the design methodology utilizing wooden by-products from S Design Company to relieve former ways' problems. The design suggestion took materials from a safe and abundant source. The wooden leftover pieces were connected together with epoxy clay, so previous process traces of furniture are remained as a decorative factor. Moreover, the synthesized material was able to be processed by ordinary woodworking facilities without additional installations. In doing so, console table focused on a commercial purpose and dining table for an artistic objective were successfully fabricated as final suggestions. In consideration of the proposal using wooden furniture leftovers, diverse recycling designs should be investigated for future reference.

• Journal of the Korean Wood Science and Technology
• /
• v.36 no.1
• /
• pp.21-29
• /
• 2008

The deterioration of Korean traditional wooden house located in seoul was estimated. This house was attacked by termite. To estimate damage status of buildings, non-destructive methods were applied. Some of the post needed to be replaced due to low strength, estimated by nondestructive methods. The house was installed with boiler heating facility, to use office and public education. This kind of heating system changed the environmental condition of the wooden house. The termite which attacked the house was classified as Reticulitermes speratus. Because of durability of wooden house effected by environment, control of the environmental condition is essential for maintaining the wooden house. The installation of modern facility to traditional wooden house should not change the traditional structure and do not effect to durability of wooden house.

• Journal of the Korea Furniture Society
• /
• v.23 no.2
• /
• pp.207-213
• /
• 2012

It was investigated present condition and enhancement of wooden playground. Wood material is the concept of eco-friendly materials. Wood is the best material which helps children to improve their emotional and physical quality. Recently, the number of wooden playgrounds was reduced but synthetic resin material has greatly increased. It was because of the high construction cost of wooden playground. Therefore, to increase the number of wooden playgrounds, it is the most important to remind people of positive recognition about wood material.

• Journal of the Korean Wood Science and Technology
• /
• v.35 no.1
• /
• pp.51-63
• /
• 2007

The biodeterioration behaviors of wooden parts in the Janggeongpanjeon built in 15 century were investigated according to the types of wood species, positions and parts of wooden column, and environmental conditions. It was found that a high differences of deterioration in the progressing levels of wood decay, according to the types of wood species, positions and parts of wooden column, and environmental conditions. The decay levels were high in the contacted areas with stone foundation which are about up to 8~40 cm above it, although it was shown the many of wooden parts of the round columns are still good condition. In the case of decay type, it was shown the brown-rot in many of the columns at outside of building which made of hardwoods. The decay in position of the columns was most serious in the directions of east-north, west-north and north. It was also indicated that the durability of Zelkova serrata was higher than other wood species of the round columns, while it was in inferior anti-insects.

• Journal of the Korean Wood Science and Technology
• /
• v.36 no.3
• /
• pp.47-54
• /
• 2008

To make up original defects of the wooden materials for decks, and to supply the wooden material for outdoor, we fabricated preservative treated plywood(PTP). Copper azole (CUAZ-1) preservative was treated with a normal full-cell process. Bond Strength of PTP was not affected after the preservative treatment. The anti-fungal efficiency and dimensional stability were obtained from PTP. A little discoloration of the surface was detected, but the dimensional change or peel bonded area off were not observed after accelerated weathering test. Although some strength of PTP was reduced after 17 months of field exposure, the PTP should be applicable for outdoor applications.