• Journal of the Korean Wood Science and Technology
• /
• 제21권3호
• /
• pp.74-81
• /
• 1993

This experiment was carried out to investigate the reaction of hydration of paper sludge during the setting of portland cement in a paper sludge, wood-cement-water mixturte. The percentage of paper sludge per cement is 7.5%, 15%, 30% respectively. The result indicated that the sludge of 7.5% had the most effect on reaction of hydration, and the sludge of 15% had moderately inhibitory effect but there is still possibility to make sludge-cement board. Paper sludge of 30%, Pinus koraiensis Sieb. et Zucc and Populus euramericana Guinier were proved to have the worst inhibitory effect on cement hydration, so pretreatment will be needed before making board with paper sludge-cement mixture.

• Journal of the Korean Wood Science and Technology
• /
• 제13권3호
• /
• pp.49-53
• /
• 1985

The effects of pre-treatments, the hot water extraction of wood meal and the addition of chemical ($CaCl_2$) to wood-cement water system on the properties of wood-cement composite such as modulus of rupture (MOR), modulus of elasticity (MOE), water sorption ratio and swelling ratio of resulting boards were studied in this experiment. The wood meals through 0.83mm(20 mesh) and retained on 0.42mm(35 mesh) screen were prepared from Pinus densiflora S. at Z. and Larix leptolepsis G. For hot water extraction, 500 grams of wood meal for each species were heated to boiling with 1,500ml of distilled water in 2-liter beaker for 6 hours. Every 2 hours, the wood meals were washed with boiling distil1ed water and reheated to boiling again. After 6 hours boiling, the boiled wood particles were collected by pouring this particles on 200 mesh screen. The collected particles then washed twice with hot distilled water and dried for 24 hours in an oven at $109{\pm}20^{\circ}C$. A mixture of 663.4 grams of cement with 331.7 grams of wood meal based on oven-dry weight were dry-mixed in a plastic vessel. The mixture was kneaded with 497.6ml of distilled water in the ratio of 1.5ml of water to a gram of wood meal. To add calcium chloride to the mixture as an accelerator, $CaCl_2$ 4% solution by weight per volume, was added to pine-or larch-cement board in the ratio of 3% to cement weight. To set wood-cement board, this mixture was clamped at 30cm ${\times}$ 30cm, in thickness of 1.5cm for 3 days at room temperature, declamped and then placed at open condition for 17 days. The target density was 1.0. The four specimens sized to 5cm in width and 28cm in length were used for MOR and MOE test for each treatment. After MOR test, the tested specimens were cut to the size of 5cm ${\times}$ 5cm for water sorption and swelling test. The twenty specimens used to measure the water sorption ratio (soaking 24 hours) and ten of these were used for swelling ratio measurement The results obtained were as follows: 1) Larch was not suitable for wood-cement boards because larch-cement board developed no strength, but pine showed 97.9kg/$cm^2$ by hot water extraction. 2) To increase MOR, hot water extraction was more effective than the addition of $CaCl_2$ in pine and larch because the $CaCl_2$ addition was seemed to speed up the ratio of cement hydration without reacting with the wood substances. 3) The water sorption ratio was lowered by the addition of $CaCl_2$ to wood-cement system because the chemical additive accelerated the rate of cement hydration. 4) In pine-cement board, the swelling ratio from 0.37 to 0.42 percent was observed in length and the swelling ratio from 0.88 to 2.0 percent in thickness. As a rule, the swelling ratio of wood-cement board was very low and the swelling ratio in thickness was higher than in length.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2003년도 학술.기술논문발표회
• /
• pp.73.1-76
• /
• 2003

Recently, as the alternatives to preserve environment such as effective usage of wastes or unusable resources are drawing attentions, researches and measures for the two tasks, which are reuse of waste wood and development of eco-friendly materials, are being examined and established in various fields. However, they are still insufficient. Therefore, in this study, for the efficient application of waste woods and eco-friendly effects, mortar was produced using sawdust as the waste wood and mineral material cement for combination, in order to produce inorganic boards using waste woods. which were made when sawing. This study attempted to suggest a basic material about the physical properties of mortar, which used waste woods, after examining the features of wood mixture rate, water-cement rate, consolation according to the mixture rate of the setting accelerator, specific gravity, compression intensity, and bending intensity as experiment factors.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2003년도 학술.기술논문 발표회
• /
• pp.73-76
• /
• 2003

Recently, as the alternatives to preserve environment such as effective usage of wastes or unusable resources are drawing attentions, researches and measures for the two tasks, which are reuse of waste wood and development of eco-friendly materials, are being examined and established in various fields. However, they are still insufficient. Therefore, in this study, for the efficient application of waste woods and eco-friendly effects, mortar was produced using sawdust as the waste wood and mineral material cement for combination, in order to produce inorganic boards using waste woods, which were made when sawing. This study attempted to suggest a basic material about the physical properties of mortar, which used waste woods, after examining the features of wood mixture rate, water-cement rate, congelation according to the mixture rate of the setting accelerator, specific gravity, compression intensity, and bending intensity as experiment factors.

• Journal of Forest and Environmental Science
• /
• 제37권1호
• /
• pp.79-89
• /
• 2021

Cement bonded boards of 10 mm in thickness were produced from the mixture of Gmelina arborea sawdust and corn cob particles. The strength and dimensional stability of cement bonded composites produced from these two mixtures were examined. A total of thirty experimental boards were produced at density level of 1,000 kg/㎥ with cement to fibre ratio of 2.5:1 and 3:1 and five (5) blending proportions of G. arborea sawdust to corn cob particles of 100:0; 75:25; 50:50; 25:75 and 100:0. The effect of the cement to fibre ratio and blending proportion on the Water Absorption (WA), Thickness Swelling (TS), Modulus of Rupture (MOR), and Modulus of Elasticity (MOE) were determined. The result indicates that as the mixing ratio of cement to fibre and blending proportion of maize cob (75%) to G. arborea (25%) increased, the thickness swelling, water absorption decreased, whereas the MOR and MOE increased. It also shows that most dimensionally stable and flexural strength boards were produced at the highest level of mixing ratios (3:1) and blending proportion of G. arborea to corn cob 25:75. However, the analysis of variance shows that TS and WA were significantly different, whereas, MOE and MOR were not significantly affected by mixing ratios and blending proportions. Finding of this study has shown that maize cob particles are suitable for cement bonded board production.

• 농업과학연구
• /
• 제9권1호
• /
• pp.250-259
• /
• 1982

낙엽송(落葉松)은 몇가지의 세멘트경화장해물질(硬化障害物質)을 함유(含有)하고 있기 때문에 목질(木質)세멘트판(板)의 제조(製造)에 부적합(不適合)한 수종(樹種)으로 알려져 왔다. 따라서 본(本) 연구(硏究)는 국산(國産) 낙엽송재(落葉松材)의 플레이크를 이용(利用)한 목질(木質)세멘트판(板) 재질(材質)에 미치는 전처리(前處理) 및 첨가제(添加劑)의 효과(效果)를 구명(究明)하고자 실시(實施)되었다. 보드의 재질(材質)을 향상(向上)시키기 위(爲)하여 냉수처리(冷水處理) 및 0.1, 0.5, 2.0%NaOH 용액(溶液)에 원료(原料)flake를 전처리(前處理) 시켰으며, $CaCl_2$, $Al_2Cl_3$ 및 $Na_2SiO_4$ 등(等)의 첨가제(添加劑)를 목질(木質)-세멘트혼합시(混合時)에 첨가(添加)시켰다. 본(本) 연구(硏究)에서 얻어진 결과(結果)는 다음과 같다. 1. 0.1%처리(處理)에서의 휨강도(强度)와 박리강도(剝離强度)는 냉수처리(冷水處理)에 비(比)하여 현저(顯著)한 강도증가효과(强度增加效果)를 나타냈다. 2. 휨강도(强度)는 0.1% 이상(以上)의 NaOH처리(處理)와 3% $CaCl_2$ (세멘트 대비(對比)) 첨가조건(添加條件)에서 JIS A-5417의 $60kg/cm^3$ 규격(規格)을 만족(滿足)시켰으며, 각(各) 첨가제(添加劑)는 공(共)히 0.5% 처리농도(處理濃度)에서 최대치(最大値)를 나타냈다. 3. 박리강도(剝離强度)는 0.1% 이상(以上)의 NaOH 처리(處理)에서 $CaCl_2$ 및 $Al_2Cl_3$의 첨가(添加)로 강도증가효과(强度增加效果)를 보였다. 4. NaOH처리농도(處理濃度)가 증가(增加)됨에 따라 팽창률(膨脹率)이 감소(減少)하여 치수안정상태(安定狀態)를 나타낸다. 5. 0.1% 이상(以上)의 NaOH처리(處理)에서 $Al_2Cl_3$, $CaCl_2$ 등(等)의 염화물(鹽化物)을 첨가(添加)시켰을 때 9.0~10.5%의 함수율(含水率)을 평형상태(平衡狀態)로 유지(維持)하였다. 6. 비중(比重)은 휨강도(强度) 및 박리강도(剝離强度) 등(等)의 강도적(强度的) 성질(性質)과 밀접(密接)한 관계(關係)가 있는 것으로 나타났다.