• Korean Chemical Engineering Research
• /
• 제48권3호
• /
• pp.409-412
• /
• 2010

본 연구는 질소 분위기의 등온 열중량 분석기를 사용하여 도시 폐기물 폐목재 시료 wood, particle board, MDF의 건조특성을 측정 및 고찰하였다. 폐목재의 건조속도는 잔류 수분 분율에 대한 1차 반응속도로 잘 표현되었다. 건조 활성화 에너지는 12.72~18.31 kJ/g mol, 빈도인자는 0.2155~1.249 1/s이었다.

• Journal of the Korean Wood Science and Technology
• /
• 제26권2호
• /
• pp.6-15
• /
• 1998

A total of forty five-ply, 30- by 30-cm lauan and larch plywood sheets were manufactured in the laboratory using commercial urea and phenol resin adhesives; half of these sheets were treated with fresh concrete. Each sheet was carbonized for 2, 4, and 6hours at $400^{\circ}C$, $600^{\circ}C$, and $750^{\circ}C$, respectively, and their physical properties were measured. The yie1d of charcoal decreased as carbonization temperature and time increased. Charcoal yield was greater in plywood than in veneer, and slightly greater in plywood treated with concrete compared to untreated plywood. Plywood manufactured with phenol resin adhesive had higher pH, higher equilibrium moisture content (EMC), and greater adsorption of methylene-blue dye compared to plywood manufactured with urea resin. For concrete-treated plywood, pH was greater than 10 even when the sheets were carbonized for 2hours at $400^{\circ}C$. Although the EMC of the phenol resin plywood was higher than that of the urea resin plywood, EMC of the phenol resin was lower than that of the urea resin. The larch phenol resin plywood that was carbonized for 6 hours at $750^{\circ}C$ adsorbed more methylene-blue than did the commercia1 wood-based activated charcoal as a result of total pore volume and surface area.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2003년도 학술.기술논문 발표회
• /
• pp.73-76
• /
• 2003

Recently, as the alternatives to preserve environment such as effective usage of wastes or unusable resources are drawing attentions, researches and measures for the two tasks, which are reuse of waste wood and development of eco-friendly materials, are being examined and established in various fields. However, they are still insufficient. Therefore, in this study, for the efficient application of waste woods and eco-friendly effects, mortar was produced using sawdust as the waste wood and mineral material cement for combination, in order to produce inorganic boards using waste woods, which were made when sawing. This study attempted to suggest a basic material about the physical properties of mortar, which used waste woods, after examining the features of wood mixture rate, water-cement rate, congelation according to the mixture rate of the setting accelerator, specific gravity, compression intensity, and bending intensity as experiment factors.

• 한국가구학회지
• /
• 제18권3호
• /
• pp.205-210
• /
• 2007

Particleboard(PB) is one of the most commonly used wood-based composite materials, which can be prepared by utilizing any kind of low grade wooden materials like waste wood which contains formaldehyde itself. Therefore, PB have been of considerable interest, in issues regarding the formaldehyde emission problems. Wood wastes are carbonized by the carbonization kiln at $800^{\circ}C$. Charcoal has been known as a formaldehyde adsorber. Thus, in this study, we fabricated PBs with carbonized waste particles cores, to examine the possibility of developing less formaldehyde emitting boards. The physical and mechanical properties were evaluated by Korean Standard (KS F 3104). The moisture content of PBs ranged from 6.76 to 8.36%. Internal bond strengths decreased with the increase in the content of carbonized core particles. Formaldehyde emission showed minimum value at 25% of carbonized core particles, but the emission values increased when the amount of carbonized cote particles increased. When 25% of carbonized core particles was used, PBs met KS F 3104 standard properties.

• 한국환경과학회지
• /
• 제16권11호
• /
• pp.1225-1230
• /
• 2007

The emissions characteristics of particulate matters(PM) according to the types of wastes from industrial waste incinerator of 800 kg/hr treatment capacity were investigated. For this study, the incinerate waste are as follows; waste resin, waste wood, waste urethane, waste gunny, and waste paper. The particulate samples were collected to be emitted in stack and air pollution control(both cyclone and bag filter). In stack, the concentrations of PM were in the range of 2.61 to $26.51 mg/Sm^3$ and the major chemical species were C, Si, Cl, K, Na, Ca in all the wastes. In cyclone fly ash, the mean content of heavy metal were in the order of Fe > Zn > Pb > Cu > Mn > Cr > Ni > Cd > As > Hg and the heavy metal content of waste resin were Zn 34,197.5 mg/kg, Fe 27,587.6 mg/kg, Pb 6,055.8 mg/kg, respectively. In bag filter fly ash, the mean content of heavy metal were in the order of Zn > Pb > Fe > Cu > Mn > Cd > Cr > Ni > As > Hg and the heavy metal content of waste wood were Pb 36,405.2 mg/kg, Fe 15,762.9 mg/kg, Cu 9,989.5 mg/kg, Cd 2,230.1 mg/kg, respectively. Comparing the heavy metal content of both cyclone and bag filter, in cyclone, the Cr, Fe, Ni content were higher than in bag filter and the Cd, Cu, Hg content were lower than in bag filter.

• 유기물자원화
• /
• 제21권1호
• /
• pp.76-84
• /
• 2013

본 연구에서는 RDF와 목재펠릿 그리고 폐목재, 폐섬유, 폐비닐 각각 폐기물로 반응속도를 분석하기 위해 열중량 감량 분석, 비등온 실험, 삼성분, 화학적 조성 분석, 발열량, 활성화 에너지(E) 기울기를 실험하고 값을 구하였다.고형연료의 각각의 삼성분을 비교하였을 때 RDF가 목재펠릿 보다 수분함량이 적게 나왔으며 발열량을 통해 각각의 폐기물 고형연료에서 연소반응 속도을 비교하여 보면 폐비닐의 연소반응이 제일 크게 나타났다. RDF와 목재펠릿을 비교해보면 회분의 차이는 목재펠릿이 좋다는 것을 알 수 있지만 활성화에너지로 비교하게 되면 RDF의 효율이 다른 4가지의 연료보다 좋다는 것을 알 수 있다. RDF는 승온 속도에 따라 차이가 있지만, $320{\sim}720^{\circ}C$ 사이에서 반응이 일어나는 것을 확인 할 수 있다.

• 한국환경농학회지
• /
• 제40권4호
• /
• pp.239-247
• /
• 2021

BACKGROUND: Enormous amounts of the wood biomass wastes have been produced through various wood processing. This study characterizes the surface characteristics of biomass powders of Cornus controversa (CC) and Quercus mongolica (QM) and investigates their removal efficiency and mechanism for Pb (II) in aqueous solution on which to base potential recycling alternative of the wood biomass. METHODS AND RESULTS: Batch experiments were conducted under different conditions of Pb concentrations, temperatures, time and solid/solution ratios. Adsorption isotherm of Pb by CC and QM biomass was explained significantly by the Langmuir model, indicating Pb was likely adsorbed on the monolayer of the surfaces. The adsorption kinetics were fitted significantly to the double first-order model consisting of rapid and slow steps. The respective rate constants (k1) of CC and QM for the rapid adsorption kinetic steps were 0.051 and 0.177 min^-1, and most of the sorption reactions proceeded rapidly within 6-20 minutes. The maximum adsorption quantities (q_max) of Pb were 17.25 and 23.47 mg/g for CC and QM, respectively. Thermodynamic parameters revealed that adsorption of Pb on the biomass of CC and QM was a spontaneous endothermic reaction. CONCLUSION(S): Results demonstrate that biomass wastes of CC and QM can be used as Pb adsorbents judging from adsorption isotherm, kinetics, and thermodynamic parameters.

• Biotechnology and Bioprocess Engineering:BBE
• /
• 제9권3호
• /
• pp.223-228
• /
• 2004

Agricultural waste products, beech wood and walnut shells, were hydrolyzed at 40$^{\circ}C$ using mixed crude enzymes produced by Penicillium sp. AHT-1 and Rhizomucor pusillus HHT-1. D-xylose, 4.1 g and 15.1 g was produced from the hydrolysis of 100 g of beech wood and walnut shells, respectively. For xylitol production, Candida tropicalis IFO0618 and the waste product hydrolyzed solutions were used. The effects on xylitol production, of adding glucose as a NADPH source, D-xylose and yeast extract, were examined. Finally, a 50% yield of xylitol was obtained by using the beech wood hydrolyzed solution with the addition of 1% yeast extract and 1% glucose at an initial concentration.

• Journal of Microbiology and Biotechnology
• /
• 제24권11호
• /
• pp.1464-1472
• /
• 2014

The microbial community structures of two continuous stirred tank reactors digesting turkey manure with pine wood shavings as well as chicken and swine manure were investigated. The reactor fed with chicken/swine wastes displayed the highest organic acids concentration (up to 15.2 g/l) and ammonia concentration (up to 3.7 g/l ammonium nitrogen) and generated a higher biogas yield (up to $366ml/g_{VS}$) compared with the reactor supplied with turkey wastes (1.5-1.8 g/l of organic acids and 1.6-1.7 g/l of ammonium levels; biogas yield was up to $195ml/g_{VS}$). The microbial community diversity was assessed using both sequencing and profiling terminal restriction fragment length polymorphisms of 16S rRNA genes. Additionally, methanogens were analyzed using methyl coenzyme M reductase alpha subunit (mcrA) genes. The bacterial community was dominated by members of unclassified Clostridiales with the prevalence of specific clostridial phylotypes in each reactor, indicating the effect of the substrate type on the community structure. Of the methanogenic archaea, methanogens of the genus Methanosarcina were found in high proportions in both reactors with specific methanosarcinas in each reactor, whereas the strict hydrogenotrophic methanogens of Methanoculleus sp. were found at significant levels only in the reactor fed with chicken/swine manure (based on the analyses of 16S rRNA gene). This suggests that among methanogenic archaea, Methanosarcina species which have different metabolic capabilities, including aceticlastic and hydrogenotrophic methanogenesis, were mainly involved in anaerobic digestion of turkey wastes.

• 자원리싸이클링
• /
• 제8권4호
• /
• pp.57-63
• /
• 1999

재활용된 농업용 폐비닐과 목재부산물로부터 Wood-Polymer Composites (WPC)을 만들었으며, 또한 LLDPE 및 혼합 polyethylene으로 만들어진 WPC와 비교하였다. 접착성 향상제로 maleic anhydride를 사용하였으며, 이의 개시제로 dicumyl peroixde를 첨가하였다. 접착성 향상제로 maleic anhydride를 사용하였으며, 이의 개시제로 dicumyl peroixde를 첨가하였다. 제조된 WPC의 물성은 인장강도 시험으로 측정하였으며, 목재 및 접착성 향상제의 첨가량에 따라 분석하였다. 또한 파단면을 SEM을 이용하여 분석하였다. 목재의 양이 증가함에 따라 WPC의 신율은 감소하고, 탄성율은 증가하였다. 하지만 인장강도는 MA가 첨가된 경우에만 증가하였으며, MA 1% 첨가로 크게 증가하였지만 더 이상의 첨가는 효과가 없었다. 농업용 재활용 비닐로 제조된 WPC의 물성은 구매된 PE 수지로 제조된 WPC와 비슷한 값을 보였다.