• 펄프종이기술
• /
• 제29권4호
• /
• pp.18-27
• /
• 1997

This study was performed to obtained the optimal delignified condition of exploded wood on the acid hydrolysis with sulfuric acid. Wood chips of pine wood(Pinus desiflora), oak wood(Quercus serrata) and birch wood (Betula platyphylla var. japonica) were treated with a high pressure steam (20-30kgf/$\textrm{cm}^2$, 2-6 minutes). The exploded wood was delignified with sodium hydroxide and sodium chlorite, and then hydrolyzed with sulfuric acid. The result can be summerized as follows ; In the exploded wood treated with sodium hydroxide, the optimal concentration of sodium hydroxide was 1% as content of lignin in the exploded wood. Lignin content of exploded wood treated with sodium chlorite was lower then that sodium hydroxide. The maximum reducing sugar yield of exploded wood treated with 1% sodium hydroxide was lower than non-treated exploded wood. In the case of sodium chlorite treated, the maximum reducing sugar yield was hgher than non-treated exploded wood. Sugar composition of acid hydrolysis solution was composed of xylose and glucose residue, and the rate of glucose residue was increased in high pressure condition.

• Journal of the Korean Wood Science and Technology
• /
• 제25권4호
• /
• pp.92-98
• /
• 1997

To make good use of chitosan forming complex with heavy metals in wood preservative treatment, woods impregnated with chitosan and copper sulfate were prepared. Amounts of leached copper, decay resistance, anti-mold efficacy, iron corrosion rates, moisture regain rates and degradation pattern in chitosan pre-treated and untreated wood were compared. After leaching test, amounts of leached copper from chitosan pre-treated wood had a much smaller than chitosan untreated wood, and good decay resistance was retained even after leaching test. From these results, it was proved that chitosan-copper complex formed in wood played and important role for decay durability. In chitosan pre-treated wood, damage values by test molds became remarkably smaller, but the growth of test molds was not perfectly inhibited. Distinct differences in iron corrosion rates between chitosan pre-treated and untreated woods was not recognized but chitosan pre-treated wood showed the lower moisture regain rates than chitosan untreated wood because of water insoluble chitosan membrane formed in wood. After leaching test, the tracheid walls in the wood treated with 2.0% copper sulfate only were eroded by the fungal attacks, but those in the wood pre-treated with chitosan remained almost intact.

• 한국신재생에너지학회:학술대회논문집
• /
• 한국신재생에너지학회 2007년도 춘계학술대회
• /
• pp.713-716
• /
• 2007

Interests have been focused to the renewable energy because energy cost of fossil fuel increased and global climate change caused by CO2 evolution became severe. To overcome these problems, it is essential to develop the energy conversion technologies of renewable resources. Therefore, production and utilization state of wood and woody waste was firstly investigated and then various technologies (pyrolysis, gasification, and combustion) converting the wood and woody waste to energy were summarized. Some case studies of woody waste utilization in europe was introduced with the policy of EU countries. Economical aspect of woody waste was compared with the current fossil fuels and the energy policy of wood and woody waste was suggested.

• 한국가구학회지
• /
• 제21권3호
• /
• pp.248-252
• /
• 2010

This study is carried out to introduce the concept of Kagome structure as the new trial for the furniture design and the feasibility of its utilization in furniture industry. Kagome means originally the two dimensional bamboo-basket woven pattern that is composed of interlaced triangles whose lattice points each have four neighboring points, which was used in traditional bamboo craft design like 'Jukbuin(bamboo-wife)'. Its unique truss structure has been widely used by many kinds of the domain of science and engineering in mechanical and architectural industry with some merits, i,e, material utilization efficiency and robust strength. Here we tried to introduce two dimensional and three dimensional form of Kagome which are supposed to be a furniture design elements. Authors think these Kagome design could be realized with domestic lumber of inferior properties. Both of them would be used as a decorative element or mechanical supporter in furniture design.

• Journal of the Korean Wood Science and Technology
• /
• 제41권5호
• /
• pp.399-405
• /
• 2013

This study demonstrates the utilization of light microscopy and Fast Fourier Transform-Peak Finding (FPF) method for microfibril angle (MFA) measurement from unstained sections of red pine (Pinus densiflora). To obtain an image with optimal contrast and resolution for MFA measurement, effects of numerical aperture (NA) of condenser lens and color filters were investigated. About 60% of NA of the maximum condenser NA produced an image with optimal contrast, but a color filter with short wavelength range (DAPI) created images with improved resolution. Manual angle measurement and the FPF method were applied to the image with optimal contrast for MFA measurement. The experimental results from the FPF method were considered to be more repeatable and less subjective than those from the manual angle measurement.

• Journal of the Korean Wood Science and Technology
• /
• 제48권4호
• /
• pp.458-471
• /
• 2020

Effect of pre-treatment and compression ratio on specific gravity (SG) and dimensional stability improvement of three lesser-used wood species from natural forest area of North Kalimantan Province, Indonesia had been investigated. Hot soaking at 80℃ for 3 hours within 2 and 5% of boron solution was applied as pre-treatment, while compression ratio applied was 20 and 40% from the initial thickness. Densification was conducted using hot pressing machine at 30 kg/㎠ of pressure and 160℃ of temperature for 15 minutes. Specific gravity was measured gravimetrically, while dimensional stability was evaluated through thickness swelling and water absorption as the indicator. Results show that SG of densified wood was influenced by wood species and compression ratio, but not by pre-treatment applied; while dimensional stability was influenced by wood species, compression ratio, and pre-treatment. Specific gravity and water absorption of densified wood was improved significantly. Specific gravity increased 28.86-63.03%, while water absorption decreased 12.80-15.89%. Thickness swelling of 20% densified wood was lower than that of 40% densified wood.

• 한국가구학회지
• /
• 제24권1호
• /
• pp.79-87
• /
• 2013

The objective of this study was to increase the utilizability of domestic thinning and small diameter wood as applying in pattern design which can be applied in interior decoration, wood craft and wood furniture, and in developing the designs of furniture and household items. Then we investigated the physical and mechanical characteristics of Acer mono wood by pressurization and heat treatment. Color change is clear, and the wood density is increased with increasing pressing rate. The compressive and bending strengths are decreased as heating time is increased after pressing. However, shrinkage is improved after pressing and heating.

• 한국가구학회지
• /
• 제25권2호
• /
• pp.96-103
• /
• 2014

The objective of this study was to increase the utilizability of domestic thinning and small diameter wood as applying in pattern design which can be used in interior decoration, wood craft and wood furniture, and in developing the designs of furniture and household items. We investigated the physical and mechanical characteristics of Betula platyphylla Wood by pressurization and heat treatment. Color change is clear, and the wood density is increased with increasing pressing rate. The compressive strength, modulus of rupture and modulus of elasticity in bending strength are decreased as heating time is increased after pressing. However, shrinkage is improved after pressing and heating.

• Journal of the Korean Wood Science and Technology
• /
• 제34권3호
• /
• pp.15-21
• /
• 2006

목질펠릿을 탄화하여 탄화물의 이용가능성을 알아보기 위하여 밀도, 수율, 원소조성, 발열량, 메틸렌블루흡착량 등의 특성을 분석하였다. 목질펠릿은 현사시, 일본잎갈나무, 잣나무, 소나무, 졸참나무의 수피를 포함한 톱밥을 이용하여 제조하였다. 목질펠릿으로부터 $0.5{\sim}0.7g/cm^3$의 고밀도 탄화물을 얻을 수 있었으며, 탄화온도가 증가하면 탄화물의 탄소함량과 발열량이 증가하였다. 목질펠릿으로부터 얻어진 탄화물의 메틸렌블루 흡착 특성은 목재의 것과 거의 유사하였다.

• Journal of the Korean Wood Science and Technology
• /
• 제13권2호
• /
• pp.45-49
• /
• 1985