• Journal of the Korean Wood Science and Technology
• /
• v.36 no.2
• /
• pp.9-20
• /
• 2008

Anatomical comparison of 3 North American species with commercial name of redcedar was executed to provide taxonomic information for prevention of confusion and establishment of sound business transaction in the wood market. Eastern redcedar (Juniperus virginiana) and southern redcedar (Juniperus silicicola) could not be separated on the basis of microstructure and ultrastructure of wood. Western redcedar (Thuja plicata), however, appeared to be obviously separated from eastern and southern redcedar in a number of microscopic and ultramicroscopic features. Useful features for separating these two groups were intercellular spaces in transverse surface, latewood width, radial intertracheid pitting, warty layer and pits with torus extensions in tracheids, ray composition, nodular end walls in ray parenchyma cells, and cross-field pitting.

• Journal of the Korean Wood Science and Technology
• /
• v.48 no.4
• /
• pp.458-471
• /
• 2020

Effect of pre-treatment and compression ratio on specific gravity (SG) and dimensional stability improvement of three lesser-used wood species from natural forest area of North Kalimantan Province, Indonesia had been investigated. Hot soaking at 80℃ for 3 hours within 2 and 5% of boron solution was applied as pre-treatment, while compression ratio applied was 20 and 40% from the initial thickness. Densification was conducted using hot pressing machine at 30 kg/㎠ of pressure and 160℃ of temperature for 15 minutes. Specific gravity was measured gravimetrically, while dimensional stability was evaluated through thickness swelling and water absorption as the indicator. Results show that SG of densified wood was influenced by wood species and compression ratio, but not by pre-treatment applied; while dimensional stability was influenced by wood species, compression ratio, and pre-treatment. Specific gravity and water absorption of densified wood was improved significantly. Specific gravity increased 28.86-63.03%, while water absorption decreased 12.80-15.89%. Thickness swelling of 20% densified wood was lower than that of 40% densified wood.

• Journal of the Korean Wood Science and Technology
• /
• v.43 no.2
• /
• pp.196-205
• /
• 2015

The aim of this study was to evaluate the fuel characteristics of thermally treated wood chips of the Larix kaempferi C. As torrefaction temperature was increased ($200^{\circ}C$ to $300^{\circ}C$), the carbon content, calorific value, and mass loss of torrefied wood chips increased significantly. The torrefied wood chips were shown to have hydrophobic properties even when only treated by mild torrefaction. The energy required to grind torrefied wood chips was reduced by the torrefaction process. Different sizes of wood chips were used in this study; however, this produced almost no difference in the fuel characteristics of processed Larix kaempferi C, except in the distribution of ground wood particles. Similar results were observed when the wood chips were torrefied for different lengths of time (15 min to 60 min) at a constant temperature. Torrefaction was shown to have positive effects on the fuel characteristics of Larix kaempferi C, including improved energy density, storage, and grindability.

• Journal of the Korean Wood Science and Technology
• /
• v.48 no.2
• /
• pp.181-195
• /
• 2020

Characteristics of carbonized biomass obtained from a Wood charcoal briquette manufacturing process using an open hearth kiln are analyzed in this research, and differences in the characteristics based on the results of a mechanical screening process and the position within the kiln. One type of biomass and five types of carbonized biomass were collected from a Wood charcoal briquette manufacturer. After screening and grinding processes were performed on samples of 1 type of biomass and 5 types of carbonized biomass extracted from a Wood charcoal briquettes manufacturer to classify by particle size, fixed carbon, ash, volatile matters, elemental composition, and high heating value (HHV) were measured. Experimental results showed that the carbonized biomass collected from the middle layer had the highest HHV, 20.4 MJ/kg, and therefore had the highest fuel quality. In terms of particle size, the carbonized biomass below 100 mesh had the lowest ash content and the highest HHV, carbon content, and fixed carbon content. Correlation analyses showed that ash content had negative correlations with HHV, volatile matters, fixed carbon, and carbon content, which suggested that ash content affected negatively on fuel quality.

• Journal of the Korea Furniture Society
• /
• v.26 no.1
• /
• pp.22-30
• /
• 2015

In order to prevent decay, distortion, bending, twist on wood products such as wooden furnitures, variety of coating materials were developed and used so far. The coating materials for wood finishing can be synthesized by natural resource or petroleum. However, these coating materials can cause contamination of indoor air quality due to emission of volatile organic compounds (VOCs). In this study, commercialized coating materials for wood finishing such as varnish, coat, and stain were evaluated on emission characteristics of VOCs. Among the varnish, eco-friendly products had about 15~46% lower TVOC emission ($1,042{\mu}g/m^2h{\sim}3,257{\mu}g/m^2h$, respectively, than typical product ($7,100{\mu}g/m^2h$). Natural resource based coating material showed lowest TVOC emission level. However, one of natural resource based waterborne stain showed higher TVOC emission level because waterborne stain already contained higher amount of natural VOC. Oil-based stain might not be suitable for indoor use on interior wall and furniture due to exceed amount of TVOC. Based on results, natural resource based coat or waterborne stain are recommenced to use on wood products.

• Food Science of Animal Resources
• /
• v.18 no.4
• /
• pp.364-370
• /
• 1998

This study was carried out to establish optimum smoking conditions i.e., smoking temperature, time, and smoking material for meat products. Smoking materials employed for smoking were oak and apple trees. Roast ham and wiener produced by various smoking conditions wree subjected to polycyclic aromatic hydrocarbons (PAHs) analysis. Benzo(a)pyrene was not detected in roast ham and wiener prepared with oak wood smoked and apple wood smoked at 250$^{\circ}C$. The content of benzo(a)pyrene in roast ham and wiener with apple wood smoked at 400$^{\circ}C$ were 0.6 and 0.7 $\mu\textrm{g}$/kg, and those sample smoked at 500$^{\circ}C$ is not suitable for meat products due to the high production rate of benzo(a)pyrene. The higher smoking temperature of the products, the higher the content of PAHs. The similar tendency was observed in smoking time. PAHs contents of the products smoked with oak wood was ranged from non-dection to 0.5 $\mu\textrm{g}$/kg. Meat products smoked for 75 min. were found to be highly valuable from the viewpoints of flavour and color.

• Journal of the Korean Wood Science and Technology
• /
• v.44 no.5
• /
• pp.705-715
• /
• 2016

The main aim of this study was to investigate the potential of wood charcoal on removing furan compounds (5-hydroxymethylfurfural (5-HMF), furfural) known as fermentation inhibitors in sugar hydrolysates obtained from supercritical water treatment of lignocellulosic biomass. For this aim, model hydrolysate was prepared, and removal rates of sugars or furan compounds depending on wood charcoal concentration and treatment time were calculated and analyzed in comparison with the case of activated carbon. 0.5, 1, 2, 4, 8, or 12% (w/v) of wood charcoal or activated carbon was loaded into the model hydrolysate, containing glucose, xylose, 5-HMF, and furfural, and treatment was conducted for 1, 3, 6, 12, or 24 h. After treatment, removal rates of 5-HMF and furfural gradually increased as wood charcoal concentration or treatment time increased, and over 95% of 5-HMF and furfural were removed at 8% of wood charcoal concentration and 3 h of treatment time, while the loss of sugars (< 2%) was hardly observed. On the other hand, in the case of activated carbon treatment, removal rates of 5-HMF and furfural were over 95% at mild condition (activated carbon concentration: 8%, treatment time: 1 h), but over 10% of glucose and xylose were removed. Therefore, considering sugar production and further process applied sugar, the wood charcoal treatment of sugar hydrolysate was more effective for removing furan compounds and maintaining the sugar yield.

• Journal of the Korean Wood Science and Technology
• /
• v.48 no.1
• /
• pp.41-49
• /
• 2020

Jabon (Anthocephalus cadamba) is a fast-growing wood species that is widely utilized for light construction and other purposes in Indonesia. The objectives of the current study were to determine the effects of monoethylene glycol (MEG) and SiO₂ nanoparticles (nano SiO₂) impregnation treatment on the dimensional stability and density of jabon wood and to identify the characteristics of impregnated jabon wood. Wood samples were immersed in water (as untreated), MEG, 0.5% MEGSiO₂, then impregnated by applying 0.5 bar of vacuum for 60 min, and then applying 2.5 bar of pressure for 120 min. The results showed that impregnation with MEG and Nano SiO₂ had a significant effect on the dimensional stability of jabon wood. Polymers can fill cell walls in wood indicated by increasing weight percentgain, antiswelling efficiency, bulking effect, and density, then decreasing in water uptake value. Jabon wood morphology by using SEM showed that MEGSiO₂ polymers can cover part of the pitsin the wood vessel wall of jabon. This finding was reinforced by EDX results showing that the silicon content was increased due to the addition of SiO₂ nano. The XRD diffraction pattern indicated that MEGSiO₂ treatment increased the degree of crystallinity in wood samples. Overall, treatment with 0.5% MEGSiO₂ led to the most improvement in the dimensional stability of 5-year-old jabon wood in this study.

• Journal of the Korean Wood Science and Technology
• /
• v.34 no.5
• /
• pp.59-66
• /
• 2006

The thermal properties of wood flour, Hwangto, and maleated polyethylene (MAPE) reinforced HDPE composites were investigated in this study. The thermal behavior of reinforced wood polymer composites was characterized by means of thermogravimetric (TGA) and differential scanning calorimetric (DSC) analyses. Hwangto and MAPE were used as an inorganic filler and a coupling agent, respectively. According to TGA analysis, the increase of wood flour level increased the thermal degradation of composites in the early stage, but decreased in the late stage. On the other hand, Hwangto reinforced composites showed the higher thermal stability than virgin HDPE, from the determination of differential peak temperature ($DT_p$). Decomposition temperature of wood flour and/or Hwangto reinforced composites increased with increase of heating rate. From DSC analysis, melting temperature of reinforced composites little bit increased with the addition of wood flour or Hwangto. As the loading of wood flour or Hwangto to HDPE increased, overall enthalpy decreased. It showed that wood flour and Hwangto absorbed more heat energy for melting the reinforced composites. Hwangto reinforced composites required more heat energy than wood flour reinforced composites and virgin HDPE. Coupling agent gave no significant effect on the thermal properties of composites. Thermal analyses indicate that composites with Hwangto are more thermally stable than those without Hwangto.

• Journal of the Korean Wood Science and Technology
• /
• v.49 no.6
• /
• pp.602-615
• /
• 2021

Red jabon wood is a potential fast-growing species for veneer, furniture, and many other wood products, but its durability is very low. The purpose of this study was to investigate the effects of castor bean oil and heating on boron leaching, dimensional stability, and resistance to decay fungi in treated jabon wood. Red jabon wood was preserved with boron solutions containing 5% boron (boric acid, borax, or borax-boric acid). Following that, castor bean oil impregnation and heating were used as posttreatments. Furthermore, all the wood samples were tested in terms of leaching, dimensional stability, and resistance against Schizophyllum commune and Fomitopsis palustris fungi. This study discovered that boron compounds, castor bean oil, and heating treatments influenced the leaching, dimensional stability, and resistance of red jabon wood to decay fungi. The double impregnation of boric acid or borax and castor bean oil, followed by heating at 160℃, significantly reduced water absorption and leaching while increasing the dimensional stability and resistance of red jabon wood against the two tested decay fungi.