• Journal of the Korean Wood Science and Technology
• /
• 제16권2호
• /
• pp.79-89
• /
• 1988

본(本) 실험(實驗)은 리기다소나무(Pinus rigida Mill)를 petroleum ether로 추출(抽出)한 추출액(抽出被)과 흑액(黑液)으로부터 얻은 tall oil과의 조성(組成)의 변화(變化)를 조사(調査)하기 위하여 실시(實施)하였다. 생재(生材)의 유기용매(有機溶媒) 추출액(抽出液)과 tall oil 을 DEAE-Sephadex 칼럼과 aluminum oxide 칼럼을 사용하여 수지산(樹脂酸)과 지방산(脂肪酸)으로 분리(分離)한 후 이를 개스크로마토 그래프로 분석(分析)하였다. 본(本) 실험(實驗)에서 얻는 결과(結果)는 다음과 같다. 생재(生材)의 유기용매(有機溶媒) 추출액(抽出液힘)과 tail oil은 주로 수지산(樹脂酸)으로 구성(構成)되어 있고 특히 abietic-type acide의 함량(含量)이 매우 높게 나타났으며, tall oil의 조성(組成)은 생재(生材)의 유기용매(有機溶媒) 추출물(抽出物)에 비(比)해 지방산(脂肪酸)의 함량(含量)이 증가(增加)한 반면 수지산(樹脂酸)은 감소(減少)하였고, 증해시(蒸解時) 고온(高溫)과 증해약품(蒸解藥品)에 의하여 불포화(不飽和) 지방산(脂肪酸)의 이중결합(二重結合) 위치(位置)의 변화(變化) 및 이성질화(異性質化)에 의하여 미확인(未確認) 물질(物質)의 양(量)이 증가(增加)하였다.

• 한국펄프종이공학회:학술대회논문집
• /
• 한국펄프종이공학회 2006년도 PAN PACIFIC CONFERENCE vol.2
• /
• pp.451-454
• /
• 2006

This paper presents an overview of ONP deinking efficiency with cellulolytic enzymes and synthetic collector in alkaline pH. Deinking is a series of unit operations designed to detach ink from cellulose fibers and separate the dispersed ink from the pulp slurry. Deinking chemicals are process aids that enable expensive mill equipment used in these unit operations to operate more efficiently - often much more efficiently. We propose the blended deinking agent with cellulolutic enzymes and synthetic collector in deinking pulp of conventional alkaline method. The deinking efficiency of old news print in alkaline pH was enhanced with enzyme treatments. The brightness of deinked pulp was increased with less residual ink particles and yield of enzymatic deinked pulp was improved compared to the deinked pulp of conventional alkaline method.

• 한국공작기계학회:학술대회논문집
• /
• 한국공작기계학회 2000년도 추계학술대회논문집 - 한국공작기계학회
• /
• pp.326-331
• /
• 2000

This paper describes the statistical analysis techniques for the surface roughness assessment of polished surfaces. In experiments, the polishing process of the sample surfaces which are manufactured by ball end mill is consist of two steps; the cusp removal process and the surface finishing process. For the cusp removal process, the criterion of cusp removal was established from the power spectrum analysis to assess the change of the cusp removal rate. For the finishing process, the surface was polished by the rotational CBN tool and vibration wood tool. And the surface quality of polished surface was assessed using the functional parameters based on the statistical values of surface profiles. Consequently, the surface finish performance of the polished surface using the vibration wood tool was improved.

• 한국펄프종이공학회:학술대회논문집
• /
• 한국펄프종이공학회 2006년도 추계학술발표논문집
• /
• pp.9-14
• /
• 2006

Deinking is a series of unit operations designed to detach ink from cellulose fibers and separate the dispersed ink from the pulp slurry. Deinking chemicals are process aids that enable expensive mill equipment used in these unit operations to operate more efficiently. This paper presents an overview of ONP deinking efficiency with cellulolytic enzymes and synthetic collector in low alkalinity process. The deinking efficiency of old news print even in low alkalinity condition was enhanced with enzyme contained complex agent. The brightness of deinked pulp was increased with less residual ink particles and yield of deinked pulp was improved compared to the deinked pulp of conventional alkaline method.

• Journal of the Korean Wood Science and Technology
• /
• 제15권4호
• /
• pp.64-68
• /
• 1987

To develope the utilities of the chestnut bur, which is wasted after harvesting chestnut in farmhouses, the feasibilities of adhesion(urea resin) extenders of the powder for plywood were examined. These experiments were implemented on experimental scale at Forestry Research Institute(Seoul) and on a plywood mill scale at Eugon Industrial Co LTD(Inchon) for more reliable data. In this paper, it was proved that the chestnut bur powder caused to rise the glue viscosity but the chaff powder to down reversely. The most effective mixing ratio were wheat flour 5kg, chaff powder: 5kg and chestnut bur powder. 5kg per 100kg of urea resin. At this condition, the viscosity were most appropriate (1,320 2,230 cps) for glue spreading operations, and the dry shear strengthes were most adequate(10.7-13.2kg/$cm^2$), wood failure ratio 82-88%). The chestnut bur powder, can be utilized for plywood adhesion extenders without any change of present process lines in plywwod mills.

• Journal of the Korean Wood Science and Technology
• /
• 제46권4호
• /
• pp.309-314
• /
• 2018

Size reduction is an important pre-processing operation for utilizing biomass as a sustainable resource in industrial-scale energy production and as a raw material for other industries. This work investigates the size reduction characteristics of air-dried Miscanthus sacchariflorus Goedae-Uksae 1 (Amur silver grass) via image processing and identifies the morphological characteristics of comminuted and screened M. sacchariflorus. At chopping lengths of 18, 40, 80, and 160 mm, 81%, 77%, 78%, and 76% of the particles, respectively, passed through a 4-mm sieve. Even a knife mill with a very small screen aperture (>1 mm) admitted over 10% of the particles. The average circularity and aspect ratio of the particles were <0.30 and >10, respectively. These results confirm that in all preparation modes, most M. sacchariflorus particles were needle-like in shape, irrespective of the type of preparation.

• Journal of the Korean Wood Science and Technology
• /
• 제26권3호
• /
• pp.48-52
• /
• 1998

Residues such as walnut, pinenut and peanut shells were used as a filler in adhesive for bonding radiata pine plywood. The nutshell residues were prepared by simply drying to 8% moisture content and grinding the dry material using a laboratory Wiley mill with a $75{\mu}m$ (200 mesh) screen. The nutshells residues were compared to a commercial filler commonly used in adhesives by the structural plywood and laminated veneer lumber industry in the United States. The adhesive mixes were made by following the recommended procedure of Georgia-Pacific Resins, Inc., using phenol-formaldehyde resin. For each filler type, three-ply plywoods, 6 mm nominal thickness and 30 by 30 cm in size, were fabricated at two press times (4 and 5 min) and around 30 minute assembly time. Evaluations of the nutshell residues were carried out by tension shear tests after cyclic boil tests on plywood. The results of the performance test included tension shear strength and wood failure. All plywoods made with the nutshell fillers were comparable to those made with the control filler. These results indicate that nutshell residues would be suitable as filler for plywood adhesives.

• Journal of the Korean Wood Science and Technology
• /
• 제50권4호
• /
• pp.256-271
• /
• 2022

Activated carbon (AC) derived from coconut shells (CS-AC) was obtained through pyrolysis at 700℃ and subsequently activated with H₃PO₄. AC was ground in a Wiley mill several times to form powder particles at particle scales of 80, 100, and 200 meshes. The characterization of the AC was studied using scanning electron microscopy (SEM), X-ray diffraction analysis (XRD), Fourier-transform infrared spectroscopy (FT-IR), and surface area analysis (S_BET). The CS-AC-200 mesh resulted in a higher percentage of mesopores and surface area. This particle size had a larger surface area with angular, irregular, and crushed shapes in the SEM view. The smaller particles had smoother surfaces, less wear, and increased curing depth and ratio of the hardness of the resin composite. Based on the characterization results of the AC, it is evident that CS-AC with a 200 mesh particle size has the potential to be used as a filler in biocomposites.

• 한국산림과학회지
• /
• 제102권4호
• /
• pp.484-490
• /
• 2013

본 연구는 낙엽송 개체목의 가공처리 과정에서 생산되는 제재목 및 제재 부산물의 양을 분석하기 위한 시뮬레이션 모델을 개발하고자 수행되었다. 이 모델에서는 수간곡선 추정식을 이용하여 개체목의 전간재적을 산출하고 절동된 원목에 대한 목재 가공 시뮬레이션을 통해 판재 및 각재, 원주목의 규격에 따른 최대 생산가능량을 예측하였다. 또한 제재목 가공처리 과정에서 생산되는 톱밥 및 죽데기의 잔존재적에 대한 분석을 수행하였다. 그 결과 흉고직경 12 cm 이상부터 제재목의 생산이 가능한 것으로 나타났고, 제재목의 생산이 가능한 경우에는 보다 큰 규격의 판재와 각재를 생산하는 것이 상대적으로 작은 규격의 판재와 각재 혹은 원주목을 생산하는 것에 비해 더 많은 생산량을 얻을 수 있었다. 향후 이 모델은 낙엽송의 이용재적 산출을 통한 산림의 경제적 가치평가는 물론, 최근 목질계 바이오에너지 자원으로서 그 중요성이 점차 높아지고 있는 톱밥과 같은 제재 부산물의 양을 예측하는 데에도 활용될 수 있을 것이다.

• 한국가스학회지
• /
• 제17권5호
• /
• pp.81-86
• /
• 2013

분진폭발은 플라스틱류, 제약, 목재, 곡물 저장고, 고체연료 및 화학약품의 제조와 같은 다양한 산업에서 발생되고 있다. 본 연구에서는 폐목재를 재활용하여 Particle board를 생산하는 공정의 사이로 분진, 함머밀 분진 및 뉴송 분진을 선택하여 분진폭발 특성을 평가하였다. 실험은 20 L 구형 폭발용기를 이용하여 목재 부유분진의 최대폭발압력, 분진폭발지수, 폭발한하계, 및 최소 점화에너지를 측정하고, 평가하였다. 이들 연구결과는 Particle board를 생산하는 제조공정의 화재 폭발사고 예방을 위한 공정안전 정보로 활용할 수 있을 것이다.