• Journal of the Korean Wood Science and Technology
• /
• 제11권2호
• /
• pp.18-26
• /
• 1983

• 한국펄프종이공학회:학술대회논문집
• /
• 한국펄프종이공학회 2008년도 추계학술발표논문집
• /
• pp.226-231
• /
• 2008

• Journal of Forest and Environmental Science
• /
• 제39권1호
• /
• pp.27-39
• /
• 2023

Twenty-five Eucalyptus clones (14 E. camaldulensis - EC and 11 interspecific eucalypt hybrid clones - EH) grown in three contrasting sites were evaluated for the growth and few wood traits at 4 years of age. The stability, genotype-site interaction and suitability of these clones for pulp and solid wood industry sectors were studied. Growth of eucalypt clones was significantly higher at site 1 with higher rainfall, but wood density did not differ significantly from lower rainfall sites. Kraft pulp yield (KPY) decreased from sites 1 to 3 based on moisture availability, but not between two groups of clones. Volumetric shrinkage (VS) was significantly higher in EC clones at site 3 with lowest rainfall, but there was no specific trend at other two sites with maximum (site 1) and intermediate (site 2) rainfall. The mechanical traits modulus of rupture (MOR) and modulus of elasticity (MOE) were at par in sites 1 and 2, but significantly lower at the driest site 3. The growth rate had a significant positive correlation with KPY, MOR and MOE and a negative correlation with VS, but no significant impact on wood density in both groups of clones. Genotype×environment interaction (G×E) was evident in most traits due to the difference in response of clones to moisture availability. Since wood density was negatively correlated to KPY, it has to be kept at an optimum level for the profitability of pulp industry. There was no significant difference between EC and EH clones for most traits except VS at site 3. Stability of clones varied across sites in different traits, and hence clones may be selected for deployment at each site by screening for growth, followed by wood density, considering the relationship of growth and density with other traits required by pulp and solid wood industry sectors.

• Journal of Forest and Environmental Science
• /
• 제33권4호
• /
• pp.355-360
• /
• 2017

This study was aimed to analyze the increased forestry incomes by combining timber production and wood processing, which is one of 6th industrialization types in Korean forestry. The selected household has been engaged in forestry for two generations and they produce timber and associated wood products in their own facility. The wood products include dimension lumber, interior wood material, cutting board, and cube chips, the household also utilize logging and sawmill residues as well as seed and seedlings as by-products. Incomes and expenses that have been incurred on individual processes of the sequential timber production and wood processing were surveyed, and we analyzed the economic outcomes of entire business. The results of this study indicate that the gross income of the household is 122.3 million Korean won and the net income is 93.6 million Korean won. The net income of the household is approximately 2.8 times higher than the average net income of whole households in the forestry of Korea in 2016, which is approximately 4.3 times higher than that of households that have been particularly engaged in timber production over the country. We found that the 6th industrialization by combining the two sequential processes creates approximately 3.2 times as much added value compared to the case relying on timber production only.

• Journal of the Korean Wood Science and Technology
• /
• 제51권5호
• /
• pp.410-418
• /
• 2023

In this study, the combustion characteristics of the Tulip tree, which is the representative broad-leaved afforestation tree in Korea, were analyzed. The flame retardant performance of the Tulip tree was analyzed by analyzing combustion characteristics on a total of three test samples; flame retardant treated, both flame retardant and oil stain-treated, and untreated. Then the flame retardance grade was classified for each of them. According to the result, test samples showed the strongest flame retardance were in order of flame retardant treated (C), both flame retardant and oil stain-treated (B), and untreated (A). As a result of analyzing the total heat emission and maximum heat emission rates, which is the evaluation standard for interior materials of Korean domestic buildings, test samples with flame retardant treat or flame retardant and oil stain treat were qualified for the flame-retardant standard. Both flame retardant and oil stain-treated samples showed higher total heat release (THR) and heat release rate compared to flame retardant-treated samples as the oil causes combustion with oxygen. On the other hand, they didn't qualify the THR in Quasi-non-combustible standards. To determine the correlation between the physical and combustion characteristics of wood, the combustion characteristics of other diffuse porous wood species, with which the Tulip tree is affiliated were analyzed, and noticed that the characteristic correlates with the density and quantity of wood. The results of this study are expected to be used as basic information on the combustion characteristics of the Tulip tree.

• 펄프종이기술
• /
• 제30권2호
• /
• pp.74-84
• /
• 1998

This study was carried out to investigate the papermaking characteristics of paper mulberry(Broussonetia kazinoki) for new Korean traditional paper(Hanji). Hanji has been traditionally made only with the bast fiber of paper mulberry. Besides mulberry bast part, wood core was utilized separately or in mixed forms as raw materials for the new Hanji. Hanjis made from the solfomethylated pulp were shown higher brightness and sheet strengths than those from alkali and alkali-hydrogen peroxide pulps. The brightness of solfomethylated pulp was found to be high enough not to need additional bleaching. In the physical properties of the Hanjis mixed with bast part and wood core pulps, the handsheet strengths were decreased as the increase of the wood core pulp contents. But the sheet strengths of Hanjis containing 10∼30% of wood core pulps were higher than those of the Hanji containing bast part pulp only. The sheet formations were improved as the increase of wood core pulp contents, while the sheet strengths were decreased.

• 펄프종이기술
• /
• 제48권2호
• /
• pp.99-105
• /
• 2016

The increase of wet web solid content after wet press and dry compressive strength were observed in lab study by judicious application of wood flour and starch for the old corrugated container (OCC). Pearl starch was better than cationic starch in strength development, but cationic starch was better for drainage. Application of vacuum on the mixed solution of wood flour and starch helped strength development further without loss of other properties. The effect of wood flour addition on wet web solid content improved as the wet pressing pressure increased. The use of wood flour and starch mixture improved wet web solid contents further.

• 한국산업융합학회 논문집
• /
• 제2권2호
• /
• pp.139-146
• /
• 1999

Combustion Characteristics of the wood chips(balsa chips) were experimental studied as fundamental investigation of the thermal recycle system of the urban dust. The urban dust contains plastics vegetable and lot of wood material. Then, a wood was chosen as an example of the component of urban dust. A small wood chip was burned in a electric furnace and mass reduction rate during volatile and combustion states were recorded by the micro-electric balance and the combustion flame shape took a photograph by video camera at the mass of wood chips and ambient temperature in the furance. Ignition delay took the minimum value when the mass of the test chip was 0.3g. When a mass of the test chip was smaller then 0.001g, combustion with flame did not burnt.

• Journal of the Korean Wood Science and Technology
• /
• 제21권2호
• /
• pp.23-30
• /
• 1993

As the demand of wood furniture becomes diverse and large-sized, artificial intelligence technique is required to design the expert system which can promote the efficiency of the operations management in wood furniture industry. This study was carried out to develop the expert scheduler, which was applied to the scheduling in chair-manufacturing process to evaluate its validity. The expert scheduler could show the results of scheduling must faster than Gantt chart method with ease. Maximum tardiness in the current chair-manufacturing process could be reduced from 29 seconds to 5 seconds by the addition of a spindle sander, a 12 spindle universal boring machine, and a moulding sander to sanding, boring, and moulding process, respectively.

• 방사선산업학회지
• /
• 제5권3호
• /
• pp.227-230
• /
• 2011

Pulps were separated from wood chips using an Electron beam irradiation (EBI) treatment without a NaOH-AQ (anthraquinone) treatment for cooking. The methods were based on a hot water treatment after EBI and two-step bleaching processes. Chemical compositions and FT-IR spectroscopy demonstrated that the content of lignin and hemicellulose in the bleached wood pulps treated with various EBI dose decreased with an increase of EBI doses. Specifically, the lignin in the bleached with pulps treated at 600 kGy of EBI dose was almost completely removed. Moreover, TGA analysis showed that a thermal stability increased with increasing the content of cellulose but the lignin decomposed slowly over the wide region.