• Journal of the Korean Wood Science and Technology
• /
• v.50 no.4
• /
• pp.246-255
• /
• 2022

The need for non-destructive testing and evaluation of Korean traditional wooden buildings is increasing because of their widespread deterioration. Among all types of deterioration, termite damage in wooden columns is the most difficult to detect with the naked eye because it starts inside the wood, and the initial deterioration is small. X-ray computed tomography (CT) is the best technology to investigate the inner state of wood that has less damage, but applying it to wooden columns between walls is challenging. Therefore, the feasibility of tomosynthesis, which is a method to reconstruct a coronal section of a subject with a few X-ray projections from a limited angle of rotation, was studied as an alternative to CT. Pine (P. densiflora) with three artificial holes was prepared as a specimen to evaluate the quality of reconstructed tomosynthesis images according to the different number of projections. The quality of the tomosynthesis images in the in-focus plane was evaluated using the contrast-to-noise ratios, while a vertical resolution between the images was assessed by determining the artificial spread function. The quality of the tomosynthesis image in the in-focus plane increased as the number of projections increased and then remained constant as the number of projections reached 21 or over. In the case of vertical resolution, there was no significant difference when 21 projections or more were used to reconstruct the images. A distinct difference between coronal section images was found when the distance was more than 10 mm from one plane to another plane.

• Journal of Korea Technical Association of The Pulp and Paper Industry
• /
• v.36 no.4 s.107
• /
• pp.41-48
• /
• 2004

To make a basepaper for multipurposed seed paper, old news print (ONP) and mixed office waste paper (MOW), modified and unmodified with a commercial cellulase, were investigated. Each handsheet was applied with different chemicals such as insecticides, germicides and herbicides. The interactions behaviors of chemicals used with base papers were evaluated by means of the contents of chemicals impregnation and dissolving behaviors in water and soil. The ONP and MOW treated with the cellulase had higher impregnation and dissolving capacities in both water and soil than untreated ONP and MOW. However, the modified ONP showed lower impregnation and dissolving capacities compared to the modified MOW. The content of impregnation of chemicals would be affected with the degree of microfibrils produced by the modification treatment. Otherwise, dissolving capacities of chemicals depend on the affinity of the residual lignin in the paper.

• Journal of Korea Technical Association of The Pulp and Paper Industry
• /
• v.47 no.4
• /
• pp.144-150
• /
• 2015

Stems of Pinus thunbergii Parl. grown with high salinity were analyzed for chemical characteristics. Stem of 2 years was rich in soluble compounds and stem of 3 years reduced the amount of the soluble compound. But, the lignin content have not seen a large change. Also, Klason lignins of stem of 2 and 3 years has not changed in nitrogen and hydrogen content. In Klason process, it was significantly increased the carbon concentration due to the hydrolysis of the carbohydrate. In addition, the accumulation of xylan from Pinus thunbergii Parl. with salinity treatment were increased noticeably. Finally, functional group of Pinus thunbergii Parl. with salinity treatment were not changed.

• Journal of Korea Technical Association of The Pulp and Paper Industry
• /
• v.47 no.4
• /
• pp.13-20
• /
• 2015

Soda-AQ pulp made from sugarcane bagasse (SCB) and oil palm trunk (OPT) were bleached in element chlorine free (ECF) sequence. Bleached SCB and OPT pulp was achieve higher brightness than 85.0% ISO. Viscosity of SCB bleached pulp and OPT bleached pulp were achieved 18-27 cPs and 18-26 cPs. In 7.8% active chlorine dioxide addition, bleached SCB pulp was shown 88.7% ISO brightness and 20.4 cPs viscosity. And bleached OPT pulp was shown 88.5% ISO brightness and 18.8 cPs viscosity with 7.8% active chlorine dioxide addition.

• Journal of the Korean Society of Industry Convergence
• /
• v.6 no.3
• /
• pp.247-252
• /
• 2003

This study is to research on two phase printing method by use of colorants extracted from sappan wood. As for the research, printing effect of printing paste, streaming time, optimal mordant concentration, change of surface color and colorfastness were measured. This experiment showed that modified starch were best on surface color among the modified starch, sodium-alginate, guar gum. And the surface color was best when the steaming time was 60 minutes, mordant concentration 8%(ow.f). And for colorfastness experiment, colorfastness to drycleaning was good, but colorfastness to light and colorfastness to washing showed no desirable result.

• Journal of Korea Technical Association of The Pulp and Paper Industry
• /
• v.36 no.5 s.108
• /
• pp.36-43
• /
• 2004

The behaviors of deterioration in the mechanical and optical properties of paper during sunlight exposure are mainly attributed to UV irradiation. The effect of different additives (anti-UV agents) on paper properties during exposure was studied. The results showed negligible changes in the mechanical properties of samples prepared with two different ways, whereas the shielding ability was increased when the additives were applied to the surface of hand sheets. Also, the paper which is treated with anti UV agents can keep freshness more effectively of agricultural products from UV irradiation.

• Journal of Korea Technical Association of The Pulp and Paper Industry
• /
• v.48 no.1
• /
• pp.34-42
• /
• 2016

In this study, we classified three copying papers and Korean, Chinese, and Japanese traditional papers using IR and/or NIR spectra and principal component analysis. Various chemicals are used when producing fine papers. In this case, the IR method to analyze functional groups is suitable for the classification of paper. On the other hand, NIR analysis is more suitable for the classification of traditional papers, as it uses nearly raw materials (pulp). Therefore, principal component analysis using IR and NIR depending on the paper production process will be the classification tool of paper.

• Journal of Korea Technical Association of The Pulp and Paper Industry
• /
• v.45 no.1
• /
• pp.27-34
• /
• 2013

Quantitative analysis of 5-hydroxymethylfufural (5-HMF) conversion from fructose by dehydration and rearrangement was investigated by $^1H$-NMR spectroscopic method. Fructose was converted to 5-HMF in dimethylsulfoxide (DMSO)-$d^6$ or acidic deuterium hydroxide at controlled reaction temperature and time. With addition of internal standards (biphenyl for DMSO-$d^6$ solvent, and 2,5-dihydroxybenzoic acid for deuterium oxide solvent), conversion from fructose to 5-HMF was analyzed by $^1H$-NMR spectroscopy. Quantitative analysis was run by comparison with peak area integration between of 5-HMF and internal standard. In DMSO solvent, 5-HMF was stable end product but part of 5-HMF was converted to formic and levulinic acid at acidic aqueous medium.

• Journal of Korea Technical Association of The Pulp and Paper Industry
• /
• v.45 no.5
• /
• pp.23-29
• /
• 2013

Various properties of cotton handsheet were measured to solve the problem of deformation while storing guar gum(natural polymer) and to improve strength and retention by synthetic polymers(A-PAM, C-PAM, CMC). The results of this study were summarized as follow. The cotton handsheet with 0.2% of A-PAM showed the best tensile index and folding endurance. Retention of fines and fillers in pulp slurry with 0.2% and 0.3% of A-PAM were more excellent than that with guar gum.

• Journal of Korea Technical Association of The Pulp and Paper Industry
• /
• v.35 no.5
• /
• pp.72-79
• /
• 2003

Nalita wood (Trema orientalis), one of the fastest growing woods in the world, is characterized anatomical, morphological and chemical properties at annual growth ring level in order to investigate as papermaking raw material. The proportion of fibers and vessel was increased with an increase of growth ring (from pith to bark). The fiber length of Nalita was increased with increasing growth ring, and an average fiber length was about 817 um. The average basic density of Nalita was about 0.38 g/cc. The total lignin & holocellulose in Nalita were increased and ash & alcohol-benzene extract decreased from pith to bark. These values were about 23.5 - 24.4 ％, 78.1 - 80.1 ％, 1.04 - 0.92 ％ and 2.1 - 1.8 ％, respectively. The xylan was the predominant sugar in the hemicellulose of Nalita.