• Journal of Korea Technical Association of The Pulp and Paper Industry
• /
• v.44 no.6
• /
• pp.1-8
• /
• 2012

This study was carried out to explore optimum use of the products generated from the National Forest Management Operation (NFMO) as raw materials for kraft pulp. First of all, different wood species from NFMO were randomly mixed, and then they were used to make kraft pulp under the specified condition. All kraft pulps made from the mixed species displayed equal physical properties to those from foreign wood chips used in Moorim P&P Co. Ltd. For optical properties, most of the unbleached pulps had high brightness but the pulp made from wood species containing chestnut tree showed the lowest brightness due to its high kappa number. Finally, the products from NFMO had little negative effects on the properties of kraft pulps. This means that they could be used as complementary raw materials for kraft pulps with foreign wood chips.

• Journal of Korea Technical Association of The Pulp and Paper Industry
• /
• v.47 no.1
• /
• pp.59-65
• /
• 2015

In this study, we evaluated optimum condition of enzyme with pH and temperature for preparation of microfibillated cellulose(MFC). Well-known endo-glucanase, three enzymes were used and CMC was used for substrate. Enzyme activity was evaluated using DNS method and absorbance with UV/VIS spectrophotometer. The enzyme shown the greatest activity was reacted with pulps at optimum condition for 1 hour and treated pulps beated until 100 mL CSF. Enzyme B and Enzyme L was the higher enzyme activity below 0.1% concentration and Enzyme N was the lowest enzyme activity. At various pH and temperature conditions, enzyme activity of Enzyme B was higher than the others at the same concentration. Especially enzyme activity at $50^{\circ}C$ of Enzyme B was almost not changed over pH 6.0. Optimum condition of three enzyme was pH 6 or pH 7 and $50^{\circ}C$ or $60^{\circ}C$. Also beating efficiency of enzyme treated pulps with Enzyme B is 55.6%.

• Journal of Korea Technical Association of The Pulp and Paper Industry
• /
• v.42 no.2
• /
• pp.41-45
• /
• 2010

This study was performed to evaluate the effect of paper property changes by internal addition of surface strength agent on printability. Advances in printing technique has required the development of paper qualities in many aspects. Basically paper structure is composed of hydrogen bonds which induce many problems in high speed printing machine because of weak bonding strength. One of the important printing problems is surface picking when mechanical pulp or recycled pulp are used. It was caused by the ink-stained blanket in printing process because accumulations of pollutant in white water and other elements which are bonded weakly or do not have hydrogen bonds. Debris at paper surface adheres to blanket which deteriorates printing efficiency and causes various problems. To complement these problems, Pennocel 5137 of polysaccharide structure was used as an agent to improve paper's surface property, strength and printability. Paper surface picking was analyzed by RI-1 test. As the dosage amount increased tensile strength, fiber bonding strength and ZDT strength were improved. Further more formation, smoothness and surface picking resistance were improved. It was confirmed that when adding polysaccharide structure polymers to improve surface strength such as surface picking resistance, it was also possible to improve tensile strength, fiber bonding strength, formation and smoothness.

• Journal of Korea Technical Association of The Pulp and Paper Industry
• /
• v.47 no.3
• /
• pp.3-10
• /
• 2015

In this study, we evaluated properties of pulp treated with swelling agent and swelling concentration. We used swelling agent, such as NaOH, DMSO, urea. One of them, pulps treated with NaOH from 0 to 5% measured WRV, beating efficiency, crystallinity and aspect ratio. We identified that NaOH when freeness reaches 100mL CSF was the shortest, on the other hand, WRV didn't change. Because NaOH is good beating efficiency, when pulp treated with various concentration of NaOH from 0 to 5%, pulp treated 1% NaOH was best beating efficiency. However, WRV, crystalline structure and crystallinity didn't change. The more NaOH concentration increased, the more aspect ratio increased, but when NaOH concentration exceeds 3%, aspect ratio decreased. As a result, pulp treated with 1% NaOH was the greatest beating efficiency and WRV, chemical structure didn't change.

• Journal of the Korean Wood Science and Technology
• /
• v.29 no.4
• /
• pp.16-24
• /
• 2001

Conventional hot-air oven-drying method takes at least four hours to determine the moisture content of wood sample and this method is not always acceptable to wood industry. In this study samples of six different specifications from Paulownia coreana, Pinus densiflora and Quercus acutissima were dried in domestic microwave oven to their oven dry weights to investigate the possibility of rapid moisture content determination technique using microwave-oven drying method. Continuous heating time, cooling time and intermittent heating time were determined by each species and sample specifications. Temperatures of surface and center of samples were also measured during drying. Oven-drying times were reduced to 1/7~1/10 of conventional hot-air oven-drying method. Therefore microwave heating and drying techniques appear attractive for wood industry as a rapid moisture content determination method.

• Journal of Korea Technical Association of The Pulp and Paper Industry
• /
• v.45 no.6
• /
• pp.30-35
• /
• 2013

To conserve wood resources for papermaking, chemical compositions of the hemp (Cannabis sativa L.) bast fiber cultivated in Korea such as holocellulose, ${\alpha}$-cellulose, lignin, alcohol-benzene extractives, hot and cold water extractives, and ash contents were investigated to manufacture the specialty packaging paper effectively. Significantly very low klason lignin content of 3.3% was accomplished by removing of the outer shell of bark. Laboratory soda pulping method which is very useful for the nonwood fiber was adapted, and it was found that there was no significant difference in both kappa number and H-factor between 25% and 30% NaOH charge. Hemp pulp cooked with the laboratory digester in 25% NaOH at $170^{\circ}C$ were mixed together with the wood pulp(NBKP:LBKP=1:1) in order to find the optimum mixture ratio which exhibited acceptable paper strength properties such as tensile index, burst index, and tear strength. When 10% of hemp soda pulps was mixed with 90% of wood pulps comprised of SwBKP and HwBKP (1:1), all physical strength increased significantly. The physical strength decreased as the amount of hemp pulp increased because the cell wall of bast fiber is very thick which causes low conformability and low fiber-fiber bonding. These results showed that paper made of hemp-wood pulp can be used for the specialty packaging paper which requires both the characteristic surface properties and the high physical strength of hemp fiber.

• The Plant Pathology Journal
• /
• v.16 no.4
• /
• pp.200-205
• /
• 2000

Biological control of blue stain fungi, such as Ophiostoma and Leptographium spp., that reduce the quality of logs and cause economic losses in wood product industry, was carried out in laboratory and field trials by a colorless strain of Ophiostoma quercus, BSFcs-1. Inoculation of pine wood chips with the colorless strain 1 wk before inoculating wild-type strain demonstrated that BSFcs-1 colonized wood chips and excluded blue stain fungi from being established. Efficacy of BSFcs-1 was compared with colorless strain of O. piliferum, which is commercially available under the trade name of Cartapip. Inoculation of pine wood logs with the colorless strain 1 wk before inoculating wild-type strain of blue stain in isolated wood chips, while O. quercus and O. floccosum colonized 0% and 17%, respectively. Simultaneous inoculation of logs with the colorless and wild-type strains resulted in decreased colonization (28%) by BSFcs-1, but increased colonization by O. quercus (185) and O. floccosum (29%). On the other hand, BSFcs-1 and wild-type strain alone colonized 75% and 71%, respectively. Treatment of the surface of log ends with mycelial suspension of BSFcs-1 after cutting also showed good control of blue stain fungi in a pine forest stands.

• Journal of the Korean Wood Science and Technology
• /
• v.48 no.3
• /
• pp.291-302
• /
• 2020

As the properties of the melamine-urea-formaldehyde (MUF) resins were changing during their storage time, this study investigated the impacts of the synthesis method and melamine content of the MUF resins on the pH, apparent viscosity, molecular weights, and crystallinity to estimate these properties over storage times of up to 30 days. Melaminesat three addition levels (5, 10, and 20 wt% based on the resin solids) were simultaneously reacted with urea and formaldehyde (MUF-A resins), while those at the same addition levels were first reacted with formaldehyde and then with urea(MUF-B resins). The pH values of the MUF-A and MUF-B resins decreased linearly as the storage time increased; the apparent viscosity increased linearly for the low melamine contents (5% and 10%) but increased exponentially for 20%. As anticipated, the molecular weights (Mw and Mn) increased linearly with the storage time, with a steeper increase in the Mw of the MUF-B resins compared with that of the MUF-A resins. The crystallinity of the two resin types decreased with storage time at higher melamine content. The relationships between these properties and the storage time made it possible to estimate the property changes in these resins synthesized by the different synthesis methods and melamine contents; this could help predict the properties of such resins in the industry during their storage.

• Journal of the Korean Wood Science and Technology
• /
• v.24 no.1
• /
• pp.17-26
• /
• 1996

This research was accomplished to evaluate possibility of using paper sludge for the raw materials of wood based panel products. The experimental panels were manufactured by four mixed ratios, the proportion of paper sludge to wood particle: 20:80, 30:70, 40:60, 50:50% (oven dry weight basis) and by three composition types, sludge-particle mixed board, three layered sludge-particle board and three layered particle board. They were tested mechanical (bending strength and internal bond) and physical properties (water absorption, thickness swelling and linear expansion). From the results they were shown that bending strength of mixed and three layered sludge-particle board were decreased with increasing of composition ratios of sludge. And the mechanical and physical properties of the boards of three layered composition types have superior to those of mixed composition type. Although composition ratios of sludge increased, the internal bond strength and dimensional stability of sludge-particle board not decreased quantitatively. We concluded that the mechanical and physical properties of three layered sludge-particle board were similar w those of three layered particle-board (control) made by our laboratory design. Therefore, it was recognized that paper sludge can be used as potential raw material in particle-board manufacturing industry.

• International Journal of Reliability and Applications
• /
• v.8 no.2
• /
• pp.153-173
• /
• 2007

Wood-plastic composites (WPC) are gaining market share in the building industry because of durability/maintenance advantages of WPC over traditional wood products and because of the removal of chromated copper arsenate (CCA) pressure-treated wood from the market. In order to ensure continued market share growth, WPC manufacturers need greater focus on reliability, quality, and cost. The reliability methods outlined in this paper can be used to improve the quality of WPC and lower manufacturing costs by reducing raw material inputs and minimizing WPC waste. Statistical methods are described for analyzing stiffness (tangent modulus of elasticity: MOE) and flexural strength (modulus of rupture: MOR) test results on sampled WPC panels. Descriptive statistics, graphs, and reliability plots from these test data are presented and interpreted. Sources of variability in the MOE and MOR of WPC are suggested. The methods outlined may directly benefit WPC manufacturers through a better understanding of strength and stiffness measures, which can lead to process improvements and, ultimately, a superior WPC product with improved reliability, thereby creating greater customer satisfaction.