• Journal of the Korean Wood Science and Technology
• /
• v.29 no.1
• /
• pp.43-51
• /
• 2001

When percentages of the component of raw lacquer were changed by adding each components that is urushiol, polysaccharide and glycoprotein, the physical properties of refined lacquer were changed and the period of refining also were changed. When polysaccharide component extracted from raw lacquer was added in raw lacquer, the period of refining was shortened about 1/3 times and this refined lacquer film was dried faster than the refined lacquer which was not added any other components. When urushiol extracted from raw lacquer was added in raw lacquer, the transparency of dried film was improved. A case of Guizhoushang was improved of the tensile strength of dried film. When both urushiol and polysaccharide were added in raw lacquer, the drying time of refined lacquer was shortened and the tensile strength of them also was improved.

• Textile Coloration and Finishing
• /
• v.27 no.2
• /
• pp.149-154
• /
• 2015

To investigate the biodegradation of the cellulose powder(CP) derived from Styela clava tunics(SCT), some physico-chemical properties and biodegradability of SCT-CP were measured after the incubation for 45 days. The particles size of SCT-CP prepared with washing, bleaching, drying, and grinding processes was $150-400{\mu}m$ although most of particles (70%) was more than $400{\mu}m$. The cellulose structures of SCT-CP detected using the X-ray diffraction and DSC analysis was very similar with that of wood pulp powder(WP-CP). The glass transition temperature was not detected in both samples. Furthermore, more than 90% of the SCT-CP was degraded, whereas only over 70% of the WP-CP was degraded after the incubation for 45 days. Therefore, these results suggest the possibility that SCT-CP is particularly applicable to prepare medical fiber and film for disease treatment.

• Journal of the Korean Wood Science and Technology
• /
• v.26 no.1
• /
• pp.7-13
• /
• 1998

In order to reconstruct the traditional technology of Korean golden varnish(Hwangchil) made from the exudates of D. morbifera, this study in the second step was carried out to analyze the chemical composition and oil properties of the exudates for coatings and bark extractives made from the trees of D. morbifera more than 20 years old grown in Wando and Jejudo islands in the southwestern part of Korean peninsula according to the physiological seasons. The results obtained are as follows: 1. The exudates appeared to be a phytoalexin because it exudated after several days in tapping only in summer season. 2. Both the exudates and bark-extracts with acetone contained 50~60% unsaponifiables and 30~50% saponifiables 3. A major component of essential oil in bark-extractives was ${\beta}$-cubebene and reached to 60~80%, while that of exudates included only 34% ${\beta}$-cubebene and some other compounds such as ${\beta}$-cadinene of 12%, aromadendrene of 9%, ${\beta}$-selinene of 9%, CAS030021-74-0 of 10%, etc. in GC-MS spectrometer. 4. A mjor component of fatty oil fraction in bark-extractives was linoleic acid and reached to more than 60%, while the exudates had mostly other components such as terpenes and phenolics instead of fatty acids accordint to GC-MS spectrometer. 5. Iodine value of samples after oil refining had 214mg/g in the exudates and more than than 150mg/g in bark-extractives, so the latter belonged to a drying oil.. 6. Therefore, the exudates from D. morbifera for traditional Korean golden varnish seems to have beeen used to a good varnish because it has some specific compounds different from its bark-extractives or general varnishes.

• Journal of the Korean Wood Science and Technology
• /
• v.37 no.4
• /
• pp.320-329
• /
• 2009

The purpose of this study was reducing the moisture accumulation in a wall, which can threaten the structural safety of light-frame wall and make residential environment poor. For the purpose, the laboratory test was carried out with different wall assemblies. Vapor retarder and air gap for ventilation were added to the typical wall. The improved performance of the proposed walls was examined through the test with distinct difference of temperature and relative humidity between outdoor and indoor air conditions. Increased dampproofing performance of additional vapor retarder was effective on reduction of moisture transmission from inside the house into the wall. However, unexpected high relative humidity was shown in the wall with two additional vapor retarder because of excessive dampproofing performance or inadequate location of vapor retarder. And, the open air gap induced the moisture transfer from inside the wall into outdoor air by ventilation. If the alternative to the induction of moisture transmission from inside the house into the wall with open air gap can be found, moisture reduction effect of that will be increased obviously.

• Journal of the Korean Wood Science and Technology
• /
• v.32 no.1
• /
• pp.80-87
• /
• 2004

This study was carried out to improve the properties of powdered tannin adhesive(PT) by adding liquid tannin resin(LT) to PT in the manufacture of particleboard. Mixing the LT to PT from 50% to 100% by weight did not show any difference in particleboard properties, but the higher the powdered tannin resin ratio, the lower the properties of the board. The proper ratio of PT to LT was 30:70 for the improvement of PT-particleboard, unless LT lower than 70%. Internal bonding strength was in proportional to the amount of LT. Mixing amino adhesives and PT did not show any improvements in mechanical and physical properties of the board but they only acted as scavenger for the free formaldehyde.Manufacturing particle board with the adhesive of 30:70 (PT:LT) and by using double blender resulted in high-performance products of E₀ level of formaldehyde emission with high water resistance (U type; below 12%, M type; below 25%), as well as saving chip drying energy.

• Journal of the Korean Wood Science and Technology
• /
• v.31 no.4
• /
• pp.31-37
• /
• 2003

Flat-sawn 32 mm-thick boards of Populus alba×P. glandulosa, one of major plantation species in this country, were dried in conventional, high-temperature and microwave-vacuum (MW/V) kilns. The average green specific gravity of the specimens used in this study was 0.349±0.074. Their average green moisture contents of heartwoods and sapwoods were around 200% and 100%, respectively. From green to oven-dry they shrunk 2.4 and 7.3% in radial and tangential directions, respectively, and there was no discrepancy between heartwoods and sapwoods. It took 65, 35 and 22 hours to dry from green to 10% moisture content in conventional, high-temperature and MW/V kilns, respectively. A colorimetry study showed that the surface color of the specimens dried in a MW/V kiln was clearer and lighter than those in other kilns.

• Journal of the Korean Wood Science and Technology
• /
• v.6 no.2
• /
• pp.3-19
• /
• 1978

Five species, Abies koreana Wilson (A. koreana), Castanopsis cuspidata var. Sieboldii Nakai (C. Cuspidata). Machilus thunbergii Sieb. et Zucc. (M. thunbergii), Styrax japonica (S. japonica), and Quercus acuta Thunberg(Q. acuta) growing in the southern part of Korea were selected for the investigation of wood properties. In order to evaluate the wood properties of these five species, anatomical, physical, mechanical, chemical and pulping characteristics were investigated. And this study also covered wood technological problems related to the drying, gluing, debarking, flooring, and wood workability so that these species might serve to the best advantage. The results obtained were summarized as follows: 1. The trunk of A. koreana with many knots was straight. However, the trunks of S. japonica and C. cuspidata were crooked. 2. A. koreana showed the longest and the widest ill the fiber morphology; 2.97mm in length, 39.3${\mu}$ in width. In general, fiber width of all the species investigated were greater than those of other Korean hardwoods. 3. The specific gravity of Q. acuta was 0.74${\pm}$0.03, and that of A.koreana was 0.34${\pm}$0.02. The range of specific gravity of the other species was 0.47-0.52. 4. The adsorption of water was propotioned inversely with the specific gravity, but the adsorption of humidity was proportioned with the specific gravity. In spite of their medium density, S. japonica showed the greatest adsorption, and M. thunbergii the least. The water adsorption of cross section was twice greater than that of lateral direction, and there was a slight difference in between the radial and the tangential direction. 5. Shrinkage for tested five species was ranged from 5.36 to 10.24% in tangential direction, and 2.83~6.13% in radial direction. Q. acuta recorded the greatest shrinkage rate, and A. koreana the least. The greater was the specific gravity, the larger was the shrinkage rate. 6. The mechanical properties of Q. acuta were similar to those of Quercus mongolica which grow in Kangwon-Do. Strength properties of C. cuspidata, M. thunbergii, A. koreana were equivalent to those of other Korean commercial woods with similar specific gravity, except S. japonica which showed slightly higher strength than that of other species with similar density. 7. Higher glue joint strength for urea and phenol adhesieves was recorded in the species of M. thunbergii and C. cuspidata, however, high-density species(Q. acuta) and even low-density species(A. koreana) did not show good joint strength. 8. The attractive figure of M. thunbergii in texture seemed to he appreciated for decoration. And the grain and texture of other species were proper for furniture and building materials. 9. All of the species except Q. acuta were considered good for wood workability. 10. The denser the specific gravity was, the longer the drying time took. However, severe drying defects were formed in M. thunbergii whose density was medium. 11. All the species were considered suitable for the flooring wood expect A. koreana whose density was light. 12. Pentosan component in all the species was great, and the amount of extractives in Q. acuta was worth noticing. 13. Yield in kraft pulp was above the level of economic pulp yield, i.e. 45% in all species. 14. Debarking was easy in the species of A. koreana and M. thunbergii, and debarking after being boiled in water was the most efficient in all species.

• Journal of the Korean Wood Science and Technology
• /
• v.33 no.1 s.129
• /
• pp.87-96
• /
• 2005

This study was carried out to evaluate the shear bond strength and adhesive bond durability of structural glued laminated timber (glulam) manufactured with mixed species lumber of Korean red pine, Korean pine and Japanese larch, using resorcinol adhesive and water-based polymeric-isocyanate adhesive (WPI). Each board used as a glulam lamina was graded by visual inspection. The visual lumber grade of the all species was very low due to the large size and number of knots and the steep slope of grain. In view of the results, appropriate pruning, sawing and drying processes might be needed to produce high grade lamina lumber with small knot size and drying defect free. Shear bond strength of every tested glulam specimen ranged between 7.9 and $9.9N/mm^2$, and much higher than the Korean Standard (KS) for glulam shear bond strength, $7.1N/mm^2$. There was not much shear bond strength difference between wood/resorcinol and wood/WPI. The resorcinol adhesive bond durability exceeded KS requirements. However, delamination on the end-grain surfaces of WPI glulam submerged in both room temperature and boiling water severely occurred, and its durability did not meet KS requirements. Further investigations may be required, and special care should be taken, to ensure long service life of WPI glulam used for exterior application. Results of this study are expected to be useful for improvement of mechanical properties and structural performance of mixed species glulam.

• Journal of the Korean Wood Science and Technology
• /
• v.39 no.4
• /
• pp.291-302
• /
• 2011

The study was to investigate whitening and antioxidation effects by determining the tyrosinase inhibition activity, DPPH radical scavenging and superoxide dismutase like activity of essential oils from Cryptomeria japonica and Chamaecyparis obtusa. The aim of the present study was to suggest preliminary data for research whitening and anti-oxidant effects material of C. japonica and C. obtusa essential oils and confirm supplementary worth of natural volatile organic compounds (nVOCs). Essential oils of C. japonica and C. obtusa leaves were extracted by steam distillation method of clevenger type, and nVOCs were extracted by high-temperature reactor for utilizing nVOCs condensates released during drying of C. japonica and C. obtusa at 80, 100, and $120^{\circ}C$ temperature conditions, respectively. In the activity of whitening and antioxidation, C. japonica oil was more effective than C. obtusa oil. nVOCs of C. japonica and C. obtusa showed highly activity of tyrosinase inhibitory at higher temperature. Antioxidation activity only shown on nVOCs of C. japonica produced at $120^{\circ}C$.

• Journal of the Korean Wood Science and Technology
• /
• v.41 no.4
• /
• pp.302-309
• /
• 2013

The highly porous cellulosic aerogels were prepared by freeze-drying method using sodium hydroxide-urea aqueous solution in the process of dissolution, gelation, regeneration and organic solvent substitution. The structural characteristics of porous aerogel were analyzed using scanning electron microscopy and nitrogen adsorption apparatus. As a result, the dissolving pulp was completely dissolved, but filter papers and holocellulose were divided into two layers (dissolved and undissolved parts) in the process of centrifugation. The structure of aerogel from dissolved pulp showed porous pores in the surface and net-shaped network in the inner part. Aerogels from filter paper and holocellulose had the condensed porous network surface and the open-pore nano-fibril network inner structure. Undissolved form of fibers was observed in the aqueous solution of aerogel from holocellulose. The BET value ($S_{BET}$) of aerogel from dissolved pulp was ranged in 260~326 $m^2/g$, and it was decreased with the increase of concentration. Whereas, the $S_{BET}$ value of aerogel from filter paper (198~418 $m^2/g$) was increased with the increase of concentration. The $S_{BET}$ value of aerogel from holocellulose were 137 $m^2/g$ at 2% (w/w) of cellulose, and it was increased to maximum 401 $m^2/g$ at 4% (w/w) of cellulose. Then, it was decreased at 5% (w/w) of cellulose.