• Journal of the Korean Wood Science and Technology
• /
• v.14 no.1
• /
• pp.55-60
• /
• 1986

Discoloration sensitivities of woods grown in this country haven't reported yet. Therefore we examined discoloration sensitivities of domestic wood specimens to iron (0.1 %, $FeCl_3.6H_2O$), alkali (pH 12.0, NaOH). acid (pH 1.0, $C_2H_2O_4$) and exposing to sunlight (40 hrs), Thirty-six hardwood species were collected and examined. All specimens were prepared from heartwoods of the collected species. But the specimens of 4 Betula species were divided into sapwoods and heartwoods. By iron stain, the color differences (${\Delta}E$) of 21 wood specimens including one Betula sapwood showed above 12.0, which means strong discoloration sensitivities, and of 3 specimens including one Betula sapwood showed below 2.5, which means weak discolorations. The most strong iron discoloration species was Jungkukgulpi-namu (Pterocarya stenoptera). By alkali stain, the color differences (${\Delta}E$) of 3 wood specimens showed above 9.0, which means strong discoloration sensitivities, and of 18 wood specimens including 4 Berula sapwoods showed below 2.5, which means weak discolorations. By acid stain, the color differences (${\Delta}E$) of 6 wood specimens showed above 10.0 which means strong discoloration sensitivities, and of 12 wood specimens including one Betula sapwoods showed below 2.5, which means weak discolorations. By exposing to sunlight, the color differences (${\Delta}E$) of 31 wood specimens including one Betula sapwoods showed below 6.5, which means, strong discoloration sensitivities, and of only one specimens showed below 2.5, which means weak discoloration. The most strong discoloration species by exposing to sunlight was Guirung-namu (Prunus padus). In general, it was shown that hardwoods grown in Korea were most subject to change of color by exposing to sunlight and next were by iron stain. Domestic hardwoods showed some differences in discoloration sensitivities from domestic softwoods previously reported.

• Journal of the Korean Society of Industry Convergence
• /
• v.6 no.3
• /
• pp.239-245
• /
• 2003

This study is to research on printing method by use of colorants extracted from Sappan wood. As for the research, the stability of paste added by mordants, steaming condition, optimal mordant concentration, change of surface color and colorfastness were measured. The experiment showed that guar gum were stability among the sodium-alginate, modified starch, guar gum. And the surface color was best when the streaming time was 60 minutes, mordant concentration 3g/l. And for colorfastness experiment, colorfastness to drycleaning was good, but colorfastness to light and colorfastness to washing showed no desirable result.

• Journal of the Korea Furniture Society
• /
• v.25 no.4
• /
• pp.319-324
• /
• 2014

Red pine is a popular species for making a cutting board in Korea, but easily sap stained. Heat treatment could improve its quality by darkening and equalizing the color of sap stained wood. The color change of sap stained red pine boards was investigated by heat treatment at $190^{\circ}C$. It was observed that the color of heat treated boards got darker and it made the color of sap stain vanished. A colorimeter was used to measure color indexes. It was revealed that the values of the lightness ($L^*$) and the yellowness ($b^*$) decreased as heat treatment repeated while the values of the redness ($a^*$) increased. The average of the color difference (${\Delta}E^*$) between the control and 1st heat treated boards was 16.1, which could be expressed as 'Extremely different' while that between the 1st and 2nd heat treated boards was 8.3, which could be expressed as 'Considerably different'. The fact that heat treatment equalized the color of boards was confirmed by a statistical analysis.

• Journal of Korean Living Environment System
• /
• v.24 no.5
• /
• pp.654-664
• /
• 2017

The use of environmentally friendly finishing materials allows us to create a space where we can feel nature and to have stability and peace in the city center. In this paper, we examined the sensitivity of people to the three café spaces where wooden finishing materials are used in the space elements that change according to people's demands for environmentally friendly space due to pollution of living environment. First, we examined the wood and finishing materials and emotional vocabulary through literature review and previous research. Second, the values of L ^*, a ^*, b^* and sR, sG and sB values were extracted by using a line spectrophotometer (Ci6X). Third, we conducted a 7 - point scale questionnaire based on the extracted 13 pairs of emotional vocabulary. Using SPSS 21, frequency analysis by descriptive statistics, crossover analysis by visiting purpose and intention, and emotional lexical factor analysis were performed. Through the study, the following points were found. First, CB (The Coffee Bean), SB (Starbucks) and HS (Hollys Coffee) showed differences in CB (65%), SB (40%) and HS (37%) in the spatial analysis. Second, CB gave color similar to the color of wall and furniture wood, but HS changed the color or brightness of wood finishing color of furniture. HS or SB showed favorable use of wood color scheme. Third, SB (26.3%) and HS (19.7%) were selected by taste. Fourth, there were differences in the items of CB, 'local-exotic' and SB 'dark-bright' in the factor value. The use of wood finishing materials differed in the atmosphere evaluation depending on the spatial factors and the color of the furniture. However, in this study, there are many factors that are insufficient in the accuracy of the ratio of the applied wood finishing material to the space element and the amount of the survey. If we further study the evaluation of emotional image according to the ratio of wood finishing materials, we think that it is necessary to study now that interest in environmentally friendly is increasing.

• Journal of the Korean Wood Science and Technology
• /
• v.14 no.4
• /
• pp.40-46
• /
• 1986

Change of color of woods is a trouble frequently found in decorative wood products. In this paper, studies were carried out on discoloation sensitivities of wood specimens to iron (0.1%, $FeCl_3{\cdot}6H_2O$), alkali (pH12.0, NaOH), acid (pH 1.0 $C_2H_2O_4$) and exposing to sunlight (40 hrs.). Four soft-woods and eleven hard-woods grown in Korea were used in this test. The results obtained were as follows: 1. In iron stain, strong discolored wood species were Larix leptolepis, Quercus mongolica. Zelkova serrata and Prunus yedoensis, and light discolored were Paulownia lomentosa and Pinus rigida. 2. In alkali stain. light discolored wood species were Abies holophylla, Kalopanax pictum, Populus ${\times}$ albaglandulosa, Acer mono, Pinus rigida, Pinus densiflora, Quercus mongolica, Betula platyphylla var. japonica, Prunus yedoensis, Zelkova serrata, Populus euramericana, Pinus koraiensis and Paulownia tomentosa, but there was no wood species of strong discolored compared with the color difference values of other reports. 3. In acid stain, light discolored wood species were Pinus rigida, Paulownia tomentosa. Pinus koraiensis, Quercus mongolica, Kalopanax piclum and Acer mone, but there was no strong discolored species compared with the color difference values of other reports. 4. In exposing to sunlight, strong discolored species were Larix leptolepis, Acer mono, Paulownia tomentosa, Populus euramericana, Pinus densijlora, Robinia pseudoacacia, Abies holophylla, Populus ${\times}$ albaglandulosa, Zelkova serrata, Prunus yedoensis and Pinus rigida, and light discolored was Alnus japonica. In general, it was shown that Korean wood species were susceptible to change of color by exposing to sunlight and iron stain compared with by alkali stain and acid stain.

• Journal of the Korean Society of Industry Convergence
• /
• v.6 no.3
• /
• pp.247-252
• /
• 2003

This study is to research on two phase printing method by use of colorants extracted from sappan wood. As for the research, printing effect of printing paste, streaming time, optimal mordant concentration, change of surface color and colorfastness were measured. This experiment showed that modified starch were best on surface color among the modified starch, sodium-alginate, guar gum. And the surface color was best when the steaming time was 60 minutes, mordant concentration 8%(ow.f). And for colorfastness experiment, colorfastness to drycleaning was good, but colorfastness to light and colorfastness to washing showed no desirable result.

• Journal of the Korean Wood Science and Technology
• /
• v.38 no.5
• /
• pp.450-456
• /
• 2010

This research was performed to develop the simple techniques to predict the copper concentration in alkaline copper quat (ACQ), copper azole (CUAZ), and bis-(N-cyclohexyl-diazeniumdioxy)-copper (CB-HDO) solutions. Two simple methods measuring the color due to copper compounds were evaluated by using a spectrophotometer. One is to directly measure the color of the preservative solutions. The other is to measure the color developed on the surface of a treated sample with the preservatives. The $L^*$ of the measured color values appeared to be the most sensitive to the change of copper concentration. The $a^*$ values of the preservative solutions tended to be decreased at above a certain concentration condition, and the $b^*$ values showed no trend with the concentration of copper compounds in preservative solutions. The surface color of the treated samples were changed from bluish to greenish as time passed. Both methods showed the high $R^2$ values of the regression models determined by using the lightness, which suggested that the methods might be applicable in preservative-treatment mills for the easy and fast prediction of the copper concentration.

• Journal of the Korean Wood Science and Technology
• /
• v.38 no.1
• /
• pp.17-26
• /
• 2010

Recently, yellow poplar (Liriodendron tulipifera L.) is getting attention in Korea due to the fast growing and high yield and quality of lumber. But, it is thought that the color difference between heartwood and sapwood may restrict the practical use of it. This study was aimed to enhance the value of yellow poplar lumber by the color control using high temperature heat-treatment, which had been tried for domestic cedar (Kim et al., 2009). The material properties including surface color of yellow poplar lumber were evaluated according to heat treatment conditions. The difference of color between sapwood and heartwood could be reduced by heat treatment at a temperature about $200^{\circ}C$. Long heating time was more effective in reducing the difference. The Equilibrium Moisture Content (EMC) of heat-treated wood was as low as 50 percent of the control. The result obviously indicates that heat-treated wood is more dimensionally stable in the change of moisture condition. The durability against wood rotting fungi also increased by the heat-treated, but it was not so effective as the case of cedar. The changes of mechanical properties of heat-treated yellow poplar were very similar to that of heat-treated cedar. In order to develop new use of heat-treated yellow poplar, the changes of mechanical properties should be considered. There were no significant changes in microscopic structure which may cause changes in mechanical properties. Further study of heat-treated wood is needed to scrutinize the causes of changes of material properties.

• Journal of the Korea Furniture Society
• /
• v.20 no.6
• /
• pp.575-580
• /
• 2009

This study was carried out to manufacture wooden vessels by small diameter wood and wasted wood of Castanea crenata Sieb. et Zucc, which has been largely planted in southern area. We made spice set, tea box set, cookie vessel set, bowl set and accessory set. With the development of edged tools, the human species has been able to fashion wood to change and enhance its environment - one only has to look at the history of all cultures to see examples of wooden artifacts and structures. Even with the development of synthetic materials and the progress of automated, mechanized production of wood and wood products, the raw material is still processed by traditional methods to meet a never-ending demand for products made from this most desirable natural material. Chestnut wood has high added value and natural color grain and is very useful for wooden vessel. Thinned low grade trees can be used to produce wooden vessel. Therefore this result can promote thinning and produce good forestation.

• Journal of the Korean Wood Science and Technology
• /
• v.33 no.4 s.132
• /
• pp.30-37
• /
• 2005

Heating and Steaming treatments were carried for deresinning and color change of radiata pine juvenile wood. The boards of 20 mm and 30 mm thicknesses were heat-treated at $150^{\circ}C$ and $220^{\circ}C$ for 2, 4 and 6 hours and steamed at $100^{\circ}C$ for 6, 24 and 48 hours. For extracting residual resin in treated boards and measuring wood surface color, alcohol-benzene solution and a portable colorimeter were used, respectively. The board of 20 mm thickness were deresined effectively by heating at over $150^{\circ}C$ for 2 hours or steaming for 6 hours while that of 30 mm thickness by steaming for 48 hours. For the board of 30 mm thickness treatment time was more influencing on deresinning than treatment temperature. The steamed boards showed higher $L^*$ than the heat-treated for both thicknesses. $L^*$ decreased with the increase of treatment temperature and time, but for the board heat-treated at $220^{\circ}C$ it didn't change after 4 hours. The surface color of the boards heat-treated at $220^{\circ}C$ for 4 and 6 hours were obviously changed, but those at $150^{\circ}C$ were not. It was revealed that the core of the heat-treated board was color changed as well as the surface.