• 보존과학회지
• /
• 제32권2호
• /
• pp.155-165
• /
• 2016

수침고목재인 목재유물의 보존처리에 가장 많이 사용되는 PEG 함침 후 진공동결건조 방법의 단점인 표면 결함에 대한 안정화처리를 위해 HPC를 도포하였다. HPC의 효과를 확인하기 위해서 외관 및 실체현미경 관찰, 색차, 중량변화율, 치수변화율을 측정하고, 통계분석을 실시하였다. 목재시료의 표면에 HPC가 얇은 층을 형성하였고, 가도관의 관공과 균열의 틈 사이를 메우고 있었다. HPC 1,000,000을 처리한 시료의 부후되지 않은 표면에서 나타난 백화현상을 제외하고 다른 변화는 나타나지 않았다. 열화시킨 시료는 수분 흡착에 의한 색변화가 나타났다. 시료 표면의 얇은 HPC 층은 열화 후에도 유지되고 있었으며, 수분 흡착에 의한 중량변화와 치수변화는 HPC에 의해 억제되는 것으로 나타났다.

• Journal of the Korean Wood Science and Technology
• /
• 제35권3호
• /
• pp.79-87
• /
• 2007

추출에 의해 얻어진 천연염료로 염색한 착색 밤나무재의 변색방지를 위하여 래커 마감도장시편는 500 lux의 실내광 및 50,000~70,000 lux의 실외광 수준의 광변색, 내산성, 내알칼리성, 내열성 영향을 시편의 색차로 측정하였다. 모든 변색실험에서 래커 마감처리 한 시편이 빛, 산, 알칼리, 온도 등에 기인한 변색방지에 효과를 나타내는 것을 알 수 있었다. 또한 염액의 pH가 알칼리로 짙어질수록 천연염색 가구재의 광변색을 경감시키는데 효과적인 것으로 나타났다.

• 한국펄프종이공학회:학술대회논문집
• /
• 한국펄프종이공학회 2006년도 PAN PACIFIC CONFERENCE vol.1
• /
• pp.91-98
• /
• 2006

The purpose of this study is to investigate the opacity and printing strength of MG paper overlaid plywood. The printing strength of ink on MG paper can be evaluated effectively by a formula $E^{*2}=[(L^{*})^{2}+(a^{*})^{2}+(b^{*})^{2}]^{1/2}$ that we proposed. Higher E value indicates good printing strength of ink-on-paper. We also assess the real color of translucent printed MG paper with a formula CIE ${\bigtriangleup}E^{*}$ (color difference between a pile of same paper to be opaque and fancy paper laminated board). In addition, the color difference on paper surface caused by the color of wood-based board (bottom) can be evaluated by a formula of Pc. No. Generally, an acceptable appearance quality of fancy boards is ${\bigtriangleup}E^{*}$ <2.0 and small Pc.No. value. The experimental results showed that Japan-made MG papers -J1, J2 and J3 have better printing strength and gloss than that of Taiwan-made paper (T1). The reason for this was that Taiwan-made paper has poor printing strength and low gloss, which might be correlated to the fiber compositions in paper. Higher printing strength can be seen for short fiber containing handsheets when comparing to that of handsheets. Nonetheless, low-freeness sheets gives better printing strength than that of high-freeness sheets. High-opacity MG paper gives good opacifying effect to the fancy paper laminated wood-based boards. Comparing the surface color of 2 kinds of fancy paper laminated boards, paperboard T1 laminated with high-opacity fancy paper showed slight color difference. The same results can be seen for $??g/m^{2}$ handsheets. Higher-opacity Acacia and Eucalyptus bleached sulfate pulps (short fiber) gives higher opacifying effect on the plywood when comparing to Northan pine and Radiata pine sulfate pulps(long fiber). The former ones also showed small color differences when comparing the color differences between the color of fancy paper and laminated paper board. Additionally, the color of bottom plywood can't be shown through for the high-opacify surface paper adhered to. Besides, the PC No of the base paper laminated board is small as well. Apparently, we can add colorants to the binders for the manufscture of various handsheets ($30g/m^{2}$) with various pulp mix ratios to increase the opacity of paperboards to certain extents. When we using yellow and brown binders in paper laminated board, the color difference between Acacia and Eucalyptus handsheets overlaid boards decreasing to 2.0 (acceptable ${\bigtriangleup}E^{*}$ <2.0, hard to discern), but not much improvement for Northern and Radiata pines. Definitely, show-through defects can be discernible for lower opacity papers. In general, admirable printing strength of fancy paper by which glued to plywood can be made with high-opacity paper and colored binders techniques.

• 한국의류산업학회지
• /
• 제21권4호
• /
• pp.509-514
• /
• 2019

Cotton fabrics were treated with gelatin to enhance dyeability and color strength when using Caesalpinia sappan dye. Gelatin was used as the protein and a pad-dry- cure method was used for the treatment process (2, 4, 6, 8, 10, 12, 14g/l concentration). Pretreated fabrics were mordanted with 10% alum. Fabrics were then dyed with freeze-dried sappan wood water extract powder form. Dyed samples were assessed in regards to dyeing behavior and color fastness. Comparing untreated and gelatin treated samples from the SEM images indicated that the Gelatin treatment (10g/l) resulted in an enhanced surface roughness that was relative to that of untreated cotton. Padding cotton with gelatin at 6g/l concentration afforded dyed fabrics with a 2 times increase in the K/S value over that of untreated fabrics. All dyed samples were red color with a significant enhancement in the sample color strength (K/S) being observed for pretreated samples. pH values favor dye absorption with pH 7 yielding the highest color strength. Dyeing at an elevated temperature resulted in a lower color strength and reddish-dull color. Longer dyeing times created greater color strengths for untreated and gelatin treated cotton. Increased dye concentrations resulted in higher K/S values for both gelatin treated and untreated cotton. As for color fastness, gelatin treated and untreated cotton fabrics dyed with sappan wood extract showed a relatively low rating in washing fastness (color change 1 rating), light fastness (1 rating), and rubbing fastness (wet:1-2, dry:3-4 rating).

• Journal of the Korean Wood Science and Technology
• /
• 제48권2호
• /
• pp.154-165
• /
• 2020

To assign the functionality of the regenerated fiber from waste MDF(wMDF) made of pitch pine, we examined the dyeing characteristics of natural dyes, sappan wood as a polychromatic natural red series, monochromatic gardenia as a yellow series, and indigo blue series. For nonemordanting dye, the colors of regenerated fiber dyed by sappan wood and gardenia were reddish yellow (YR) and yellow (Y) series, respectively, and dyeing conditions were appropriate a 30 ~ 50 g/L of dyeing materials at 60 ℃ for 60minutes of dyeing time. We obtained regenerated woody dyed fibers (Re-WDF), YR to the red (R) series by premordanting with Al and Cu mordant for sappan wood and the purplish red (RP) series by Fe premordanting. In the case of gardenia, only Y series colors were developed in nonemordanting dye or all three mordants. Indigo dye produced Re-WDF with greenish yellow (GY) tone at 1%, green (G) tone at 3%, and blue (B) tone at 5% concentration or more. Re-WDF with indigo showed the best light fastness followed by sappan wood and gardenia. In particular, the light fastness of Re-WDF with gardenia was very poor. The light fastness was somewhat improved by premordanting(Fe>Cu>Al) both sappan wood and gardenia dyes.

• 미생물학회지
• /
• 제19권3호
• /
• pp.128-136
• /
• 1981

In order to investigate early identification of species of the wood-decaying fungi in the the mycelial stage, the authors isolated of 41 species, 28 genus, 9 family at 8 locations in Korea and cultivated these isolates on the various kinds of solid media. After investigating such cultural characteristics as oxidase reactions with tannic and gallic acid, various morphological features of colony and growth grade, appeared on the various media, the authors obtained the following results : 1. The oxidase reactions with tannic and gallic acid in the PDTA, DTA, PDGA and DGA media are available for identificantion of the wood-decaying fungi. 2. The oxidase reactions with guaiacol, pyrogallol and hydroquinone in the PDGUA, PDPA and PDHA media are not so much available for identification of the wood-decaying fungi. 3. Morphological features of colonies such as mycelium color, floccose, floccose-powdery, mycelloid, powdery-mycelloid, velvet, radiate, contoured, rosulate and growth grade on the PDA, PSA and PXA media are useful for identification of wood-decaying fungi. 4. It is believed that early identification in species level of wood-decaying fungi using cultural characteristics in the mycelial stage is possible. 5. The key for the identification of 41 species of wood-decaying fungi is proposed by the cultural characteristics using several solid media.

• Journal of the Korean Wood Science and Technology
• /
• 제49권1호
• /
• pp.82-92
• /
• 2021

Nakdong technique is an unfamiliar scorching treatment using an iron heated in a kiln over 1000℃. It is a typical convention in Asian countries to treat Nakdong on the surface of paulownia species. The scorching treatment changes the surface characteristics as well as the color of the wood. This study focused on the effects of functional features such as water resistance, anti-mold, anti-termite, and sound improvement because this treatment is usually used on paulownia wood-bodied musical instruments surface. It took 28'57" for Nakdong-iron treated surface to absorb a droplet of water. The absorbance time of iron treated surface was longer than that of torch treated one. There was no noticeable effect on the anti-mold test. On the anti-termite test, there was nearly 3% more mean mass loss on the torch samples than controlled and iron treated ones. In examining the sound radiation coefficient before and after Nakdong treatment, the Nakdong-iron treated surface showed an increase in the average value of 1.2 m4/kg s, which means that it has sound quality improvement. Through this research, the Nakdong technique results are expected to be used as basic-data for further research and give a practical idea for using the traditional treatment method on the wood surface.

• 한국산림과학회지
• /
• 제65권1호
• /
• pp.60-67
• /
• 1984

한국산(韓國産) 단풍나무속(屬) 6개(個) 수종(樹種)의 심재내(心材內) 지질(脂質)을 추출(抽出)하여 Thin Layer Chromatography에 의한 방법(方法)으로 종(種)을 식별(識別)하였으며, 정색반응(呈色反應)의 특징(特徵)으로 유연관계(類緣關係)를 조사(調査)한 결과(結果)를 요약(要約)하연 다음과 같다. 1) 6개(個) 수종(樹種) 심재(心材)의 지질함량(脂質含量)은 유리암질(遊離暗質)이 평균(平均) 2.85%, 결합지질(結合脂質)이 1.54%이었으며, 전지질(全脂質)은 4.39%이었다. 2) TLC 정색반응(呈色反應) 특징(特徵)에 의해서 단풍나무속(屬) 6개(個) 수종(樹種) ; 신나무, 고로쇠나무, 네군도단풍, 단풍나무, 은단풍, 복자기를 식별(識別)할 수 있었으며, 정색반응(呈色反應)에 의한 유연관계(類緣關係)를 보면 단풍나무와 복자기가 근연(近緣)임을 알 수 있었다.

• 펄프종이기술
• /
• 제44권1호
• /
• pp.24-30
• /
• 2012

This study was carried out in order to analyze a repletion possibility about color change of base paper after elevated heat exposure when wooden fillers were added. Fillers may reduce production cost because its price is usually inexpensive than pulp with higher bulkiness. Wooden fillers have lower density than inorganic fillers, so they may increase bulk more than inorganic fillers. Never the less wooden fillers have disadvantage of yellow color by heat exposure, so the addition level should be carefully controlled. Brightness and whiteness changes after elevated heat exposure depending on coating weight were analyzed. With wooden fillers addition, breaking length and surface strength decreased but bulkiness increased. As the exposure time of elevated heat increased the coating paper with wooden fillers addition had higher brightness and whiteness values than those of inorganic fillers.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2006년도 춘계 학술발표회 논문집(II)
• /
• pp.457-460
• /
• 2006

There are many kind of materials decorating outward of building such as paint, tile, brick, wood, stone and so on. But it has been pointed out some problems because of the industrial pollutions and wastes. Color concrete is a method of expressing out surface of exposed concrete. Generally, color concrete is manufactured by adding pigment to concrete. In this paper we used cement paste as a preparation step to apply to concrete. Pigment was added to white cement for easy observance of color difference. And color change was measured by color reader. Finally, we can predict color difference according to amount of pigment. Also, we investigate the color concrete technology for Art type using developed color concrete.