• Journal of the Korean Wood Science and Technology
• /
• 제35권3호
• /
• pp.70-78
• /
• 2007

본 연구는 치자나무, 홍화, 오배자, 지치(지초), 소목 및 밤송이 등으로부터 추출한 천연염료를 이용하여 밤나무재를 염색할 때 나타나는 목재 표면의 색상 변화를 정량적으로 분석하여 효과적인 천연염색법을 검토하였다. 목재 시편은 염액의 온도, pH, 침지시간, 반복처리 횟수 등과 같은 다양한 처리조건을 적용하여 다채로운 색을 발현시겼고, 천연염색된 시편의 색상을 정량적으로 측정하기 위하여 $L^*$, $a^*$ 및 $b^*$ 값을 측정하여 채도와 염착농도를 산출해 내었다. 도막처리법은 천연염색 시에 많은 시간을 필요로 하는 침지 처리에 비해서 더욱 경제적인 처리법이라는 것을 확인할 수 있었다. 또한 착색력이 낮은 도막처리법은 반복적인 도막 처리를 통하여 원하는 색상을 얻을 수 있었으며 색상의 농담도 쉽게 표현할 수 있었다. 천연염색 처리 결과 염액의 온도가 높으며 약산성 염료(pH4의 수준)를 사용함으로써 우수한 착색효과를 얻을 수 있었다.

• Journal of the Korean Wood Science and Technology
• /
• 제14권4호
• /
• pp.40-46
• /
• 1986

국내산(國內産) 16수종재의 철오염(鐵汚染), 알칼리오염(汚染) 산오염(酸汚染), 태양광(太陽光)에 의한 변색을 측정한 결과를 요약하면 다음과 같다. 1. 철오염(鐵汚染)이 심(甚)한 수종(樹種)은 일본잎갈나무, 신갈나무, 느티나무, 왕버섯나무등 이었고, 적은 수종(樹種)은 참오동나무, 리기다소나무등 이었다. 2. 국내산수종(國內産樹種)은 알칼리오염(汚染)이 적은 평이었고, 알칼리오염(汚染)이 낮은 수종은 젓나무, 음나무, 현사시, 고로쇠나무, 리기다소나무, 신갈나무, 자작나무, 왕벗나무, 느티나무, 이태리포플러, 잣나무, 참오동나무 등이었다. 3. 산오염(酸汚染)이 심(甚)한 수종(樹種)은 본(本) 실험(實驗)에서 사용재중(使用材中)에는 나타나지 않았고, 낮은 수종은 리기다소나무, 오동나무, 잣나무, 신갈나무, 음나무, 고로쇠나무 등 이었다. 4. 태양광(太陽光)에 의한 변색은 본(本) 실험(實驗)에서 사용(使用)한 공시재중(供試材中)에는 변색의 정도가 높은편으로서 변색이 심(甚)한 수종은 일본잎갈나무, 고로쇠나무, 참오도나무, 이태리포플러, 소나무, 아까시나무, 젓나무, 현사시, 느티나무, 왕벗나무, 리기다소나무 등이었으며, 태양광에 의한 변색이 낮은 수종(樹種)은 오리나무로서 국내산재 16수종이 태양광에 의한 변색의 정도가 높은 것이 특징이었다. 일반적(一般的)으로, 한국산(韓國産) 수종(樹種)은 태양광(太陽光)과 철오염(鐵汚染)에 의한 정도가 높은 편이었고, 알칼리오염(汚染)과 산오염(酸汚染)에 의한 변색은 낮은 편에 속하였다.

• 펄프종이기술
• /
• 제41권5호
• /
• pp.20-25
• /
• 2009

Residual extractives had a noticeable impact on the brightness of unbleached hardwood kraft pulps (trembling aspen). The brightness-impacting extractives were effectively removed by oxygen delignification. In addition, oxygen delignification was more effective in removing chromophores in hardwood unbleached kraft pulps than in those of softwood (loblolly pine). The residual extractives in unbleached hardwood kraft pulps also affected the pulp color, primarily redness and the L value. These redness-related extractives in unbleached hardwood kraft pulps were also effectively removed by oxygen delignification. There were no significant color differences between untreated and solvent-extracted oxygen-delignified aspen kraft pulps. The residual extractives in unbleached and oxygen-delignified softwood (loblolly pine) kraft pulps did not have a significant impact on either brightness or pulp color.

• Journal of the Korean Wood Science and Technology
• /
• 제38권5호
• /
• pp.450-456
• /
• 2010

This research was performed to develop the simple techniques to predict the copper concentration in alkaline copper quat (ACQ), copper azole (CUAZ), and bis-(N-cyclohexyl-diazeniumdioxy)-copper (CB-HDO) solutions. Two simple methods measuring the color due to copper compounds were evaluated by using a spectrophotometer. One is to directly measure the color of the preservative solutions. The other is to measure the color developed on the surface of a treated sample with the preservatives. The $L^*$ of the measured color values appeared to be the most sensitive to the change of copper concentration. The $a^*$ values of the preservative solutions tended to be decreased at above a certain concentration condition, and the $b^*$ values showed no trend with the concentration of copper compounds in preservative solutions. The surface color of the treated samples were changed from bluish to greenish as time passed. Both methods showed the high $R^2$ values of the regression models determined by using the lightness, which suggested that the methods might be applicable in preservative-treatment mills for the easy and fast prediction of the copper concentration.

• Journal of the Korean Wood Science and Technology
• /
• 제17권1호
• /
• pp.12-21
• /
• 1989

This experiment was executed to investigate the characteristics of gloss and color difference in coated films by N.C. Lacquer, Aminoalkyd, Polyester. and Polyurethan coating after chemical (distilled water, ethyl alcohol. acetic acid, and sodium hydroxide) and heating ($120^{\circ}C$) treatments, cold-check test, and U.V. radiation. The results obtained were summarized as follows 1. The gloss decreasing rate by water resistance test was the least among chemicals treated on coated films. 2. The color difference of coated films chemical treatments highly and similarly increased, except the alkali treatment showing a little increase. 3. In the color difference by U.V. radiation, the polyester coated film showed generally large difference compared with the other coated films.

• Journal of the Korean Wood Science and Technology
• /
• 제36권6호
• /
• pp.33-40
• /
• 2008

삼나무의 심재 부위에는 흑화현상이 자주 발생한다. 심재 내 페놀성 추출물과 Norlignans 물질이 약알칼리하에서 산화함으로써 흑화현상이 발생한다고 보고된 바 있다. 본 연구에서는 삼나무 내부 흑심재와 변재간의 색상차를 줄여보고자 열처리와 광처리를 실시하였다. 열처리로는 열기건조, 진공가열건조, 열수처리를 적용하였고, 광처리로는 삼나무 표면에 자외선광을 조사하였다. 열처리와 광처리에서 온도와 함수율 및 자외선의 색상차 감소효과를 평가하였다. 색상차 감소 효과는 열수처리가 가장 우수하였으며, 산소량이 적은 저기압 상태에서 건조시킴으로써 산화반응을 줄여보고자 실시한 진공건조는 기대한 바와 달리 열기건조와 비슷한 정도의 목재 표면의 색상차 감소효과를 보였다. 광처리는 건조재 표면의 색상차 감소효과를 보여 대패가공 후 마감처리에 적합한 것으로 판단된다. 추후 효과적인 삼나무 재색제어를 위해서 각 처리별 최적 공정조건 탐색 및 복합처리 적용기술개발이 필요하다.

• 한국펄프종이공학회:학술대회논문집
• /
• 한국펄프종이공학회 2007년도 춘계학술대회논문집
• /
• pp.368-379
• /
• 2007

To investigate the dying properties of the extracts from different parts of Neolitsea sericea Koidz on Hanji, the dye materials were prepared from the extraction methods using $1{\ell}$ of hot water and alkaline solution with 40 g of leaves, bark, and wood each. K/S values and H (V/C) values of the Hanji dyed at different pH, temperature, time, and concentration of extract were determined using a spectrophotometer, and the maximum absorption wavelength of the dyed Hanji was 400 nm. From the analyzed data, the optimum dying conditions were pH 5 of dying solution, $70^{\circ}C$ of dying temperature, 40 minutes of dying time, and 100% of dye concentration. The color of dyed Hanji was Y to YR and color R- and RP-type could also be formed from the different treatment conditions. From the dyeing using mordants, amount of the bound dye materials was high in the pre-mordanted Hanji and in Hanji treated with extracts from the leaves. Also, the amount of the bound dye materials in the pre-mordanted Hanji was higher when aluminum and iron mordant was used rather than other mordants. Not likely with this, amount of the bound dye materials in the post-mordanted Hanji was higher when copper mordant was used. In color, Hanji treated extracts from the leaves appeared as Y-type and ones treated with extracts from bark and wood showed YR-type.

• 펄프종이기술
• /
• 제39권2호
• /
• pp.60-67
• /
• 2007

To investigate the dying properties of the extracts from different parts of Neolitsea sericea Koidz on Hanji, the dye materials were prepared from the extraction methods using $1{\ell}$ of hot water and alkaline solution with 40 g of leaves, bark, and wood each. K/S values and H (V/C) values of the Hanji dyed at different pH, temperature, time, and concentration of extract were determined using a spectrophotometer, and the maximum absorption wavelength of the dyed Hanji was 400 nm. From the analyzed data, the optimum dying conditions were pH 5 of dying solution, $70^{\circ}C$ of dying temperature, 40 minutes of dying time, and 100% of dye concentration. The color of dyed Hanji was Y to YR and color R- and RP-type could also be formed from the different treatment conditions. From the dyeing using mordants, amount of the bound dye materials was high in the pre-mordanted Hanji and in Hanji treated with extracts from the leaves. Also, the amount of the bound dye materials in the pre-mordanted Hanji was higher when aluminum and iron mordant was used rather than other mordants. Not likely with this, amount of the bound dye materials in the post-mordanted Hanji was higher when copper mordant was used. In color, Hanji treated extracts from the leaves appeared as Y-type and ones treated with extracts from bark and wood showed YR-type.

• Journal of the Korean Wood Science and Technology
• /
• 제46권2호
• /
• pp.125-131
• /
• 2018

This study was conducted to understand and to compare the qualitative aspects of anatomical characteristics in compression wood (CW), lateral wood (LW), and opposite wood (OW) in a stem of Ginkgo biloba. The qualitative analysis was examined by optical microscopy and scanning electron microscopy. CW in Ginkgo biloba disks were dark brown in color, and the OW and LW were light brown in color. CW and OW showed abrupt transitions from earlywood to latewood, while LW showed a gradual transition. Cross sections of CW presented circular tracheids with angular outlines, many intercellular spaces, and varying sizes of lumens. Cross sections of LW and OW showed rectangular tracheids, fewer intercellular spaces, and varying sizes of lumens. In radial sections, CW showed an irregular arrangement of tracheids in earlywood, while LW and OW showed comparatively regular arrangements. Slit-like bordered pits on the tracheid cell wall, piceoid pits in the crossfield, and a few spiral checks were present in CW. LW and OW showed bordered pits with slightly oval-shaped apertures, as well as cuppresoid pits in the crossfields. Rays were primarily uniseriate, with few biseriate rays in the tangential sections of CW, LW, and OW. The tips of the tracheids were branched in CW but had a normal appearance in LW and OW.

• Journal of the Korean Wood Science and Technology
• /
• 제50권1호
• /
• pp.46-58
• /
• 2022

Wood from tropical plantation forests has lower physical and mechanical properties than mature wood. Furfuryl alcohol (FA) impregnation into the wood could help to enhance hydrophobic properties, dimensional stability, and structural strength. Furfurylation was applied to specimens of the following four fast-growing tropical wood species: jabon (Anthocephalus cadamba), sengon (Falcataria moluccana), mangium (Acacia mangium), and pine (Pinus merkusii). The discoloration and physical and mechanical properties were subsequently measured, and the results showed that furfurylated wood had a darker color and better physical and mechanical properties than untreated wood. Specifically, the furfurylated wood had higher density, modulus of elasticity, and hardness and lower moisture content, water absorption, swelling, and shrinkage. The furfurylation significantly enhanced physical and mechanical properties.