• 식물분류학회지
• /
• 제41권3호
• /
• pp.182-193
• /
• 2011

As a part of the on-going effort to conserve endangered Scrophularia takesimensis Nakai in Korea, its genetic structure and diversity from 3 population, consisted of 14 subpopulations in Ulleung Island were analyzed using RAPD band patterns. Out of 60 primers tested, 33 generated amplified bands with its genome, including 149 polymorphic and 67 monomorphic bands. The highest number (146) was found in northern population, especially, 64 in HY subpopulation; the smallest (40) in eastern population. An examination of its genetic structure with AMOVA revealed that about 60% of all variations could be assigned to among subpopulations within populations. Population differentiation among populations and subpopulations is seriously going now because of habitat fragmentation due to human activities, such as road and small port construction. Although the habitats of S. takesimensis in Ulleung Island, Korea are disappeared at an alarming rate, significant levels of genetic variation still exist at species level, and population level, especially northern population. Therefore, three conservation strategies should be needed urgently; 1) preservation of populations as it stands, 2) establishment of recovery plan to connect population and subpopulations genetically, and 3) long-term monitoring.

• Structural Engineering and Mechanics
• /
• 제23권5호
• /
• pp.579-597
• /
• 2006

The behaviour of reinforced concrete moment resisting frame structures in recent earthquakes all over the world has highlighted the consequences of poor performance of beam column joints. Large amount of research carried out to understand the complex mechanisms and safe behaviour of beam column joints has gone into code recommendations. This paper presents critical review of recommendations of well established codes regarding design and detailing aspects of beam column joints. The codes of practice considered are ACI 318M-02, NZS 3101: Part 1:1995 and the Eurocode 8 of EN 1998-1:2003. All three codes aim to satisfy the bond and shear requirements within the joint. It is observed that ACI 318M-02 requires smaller column depth as compared to the other two codes based on the anchorage conditions. NZS 3101:1995 and EN 1998-1:2003 consider the shear stress level to obtain the required stirrup reinforcement whereas ACI 318M-02 provides stirrup reinforcement to retain the axial load capacity of column by confinement. Significant factors influencing the design of beam-column joints are identified and the effect of their variations on design parameters is compared. The variation in the requirements of shear reinforcement is substantial among the three codes.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2006년도 제37회 하계학술대회 논문집 C
• /
• pp.1623-1624
• /
• 2006

It is a paper for design, manufacture and estimation of industry inkjet head. Simulations for Actuator, Ink flow and Ejection are executed for securing design ability. Relations between droplet and properties of ink are explained closely through simulation for nozzle. Actually, two silicon plates are made by dry and wet etching and directly bonded. PZT materials is attached on the bended ink flow part and cut to $540{\mu}m$ interval by dicing saw. Actuator was seen variation within 10% between simulation and actual head. Through the ejection estimation, it is shown that stabilized driving voltages change according to viscosity and surface tension of metal ink. Using the metal ink of viscosity of 4.8 cps and surface tension of 0.025 N/m, it is possible to eject the stable droplets with 5m/s, 20 pl, 5 kHz.

• 한국항공우주학회지
• /
• 제36권3호
• /
• pp.258-263
• /
• 2008

초음속 순항 엔진 연소기에 적용하기에 유리한 스크류형 선회기를 장착한 인젝터의 성능을 이론적, 수치적, 실험적 방법을 통해 밝혀 내었다. 인젝터의 성능은 유출계수와 분무각을 중심으로 살펴보았으며, 이에 영향을 미치는 형상 파라미터를 정의하고 기준 인젝터를 설계하여 형상계수에 따른 성능의 변화를 살펴보았다. 정의된 범위에서 인젝터의 성능은 이론적 예측에 의한 값보다 작은 값으로 나타났으며, VOF 방법을 사용한 수치해석에 의해 성능이 매우 잘 예측되는 것을 확인할 수 있었다. 점성장벽에 해당하는 특성은 나타나지 않았으며, 최소 0.05의 유출계수와 최대 104의 분무각을 얻을 수 있었다.

• 대한조선학회논문집
• /
• 제33권4호
• /
• pp.97-105
• /
• 1996

선체 중량이 최소가 되는 설계를 수행하기 위해서는 선체 중량이 최소가 되는 tank 배치의 결정이 선행되어야 하며, 결정된 tank 배치 내에서 선체 중량이 최소가 되는 구조 부재의 배치 및 치수를 결정하여야 한다. 선체 중량이 최소가 되는 tank 배치를 하기 위하여 저자들에 의해 개발된 선급 규정에 의한 종강도 부재의 최소 중량 설계 프로그램과 일반화 경사처짐법에 의한 횡강도 부재의 최소 중량 설계 프로그램을 결합하여 화물창부의 선각 중량을 구하였으며, 중량 추정 공식에 의해 횡격벽 및 선수미부 등의 중량을 구함으로서 선체 전체의 최소 중량 설계 프로그램을 개발하였다. 본 연구에서는 tank의 개수, web의 개수 및 종격벽의 위치 변화에 따른 선각 중량 변화를 알아보았으며, 실선 설계에 적용하고자 MARPOL을 만족하는 다양한 tank 배치를 결정하고 선체 전체의 최소 중량 설계를 수행하여 이들 중 선각 중량이 작게 되는 tank 배치를 구하였으며 실적선의 선각 중량과 비교 검토하였다.

• 복식
• /
• 제65권1호
• /
• pp.150-163
• /
• 2015

Due to desire for more variation from male consumers within the men's fashion market in Korea, there has been an ongoing development of departmentalization of fashion styles. The Generation-X man, in particular, is the most active member of our current day society, and will be the principal agent in the senior market from here on forth. Thus, this study categorized their preferred fashion styles, and will seek to analyze the behaviors related to the pursuit of clothing of the Generation-X man. The qualitative investigations of the Q-method as well as the quantitative investigation of the SPSS 12.0 were used in conjunction as the method of study. Additionally, images and types resulting from the preceding first-year study entitled "The Type and Characteristics of the Modern Men's Fashion Images" were utilized as part of the surveys. As a result of the Q-method, which was used to derive the preferred fashion styles of the Generation-X man, they were classified into three categories: the classic suit preferring 'conservative class type', the polished, comfortable style preferring 'modern sophisticated type', and the adventure and variety seeking 'uninhibited individualistic style'. After analyzing the factors which influence clothing preference behaviors of these men, a total of seven causes were drawn from the results, including: conservative indifference to fashion, others conscious pursuit of fashion, the aim to show off brand name products, high involvement in the aspect of design, pursuit of TPO, pursuit of self-image, and conformity to fashion. The elements that revealed differences in the behaviors in pursuing clothing within the preferred fashion style types of the Generation-X man included the conservative indifference to fashion, and others conscious pursuit of fashion, which therefore shows that rather than enjoying the fashion lifestyle, these men possess a more conservative disposition instead.

• 센서학회지
• /
• 제12권1호
• /
• pp.34-43
• /
• 2003

본 연구에서는 동맥혈액 내의 혈액가스(pH, $pCO_2$, $pO_2$)를 측정할 수 있는 휴대용 혈액가스 분석 시스템을 구현하였다. 구현된 시스템은 크게 하드웨어부와 소프트웨어부로 구분하였으며, 하드웨어부는 메커니즘과 전자회로부로 구분하여 설계하였다. 소프트웨어부는 각 모듈별로 작성하였으며, 운용프로그램, 세척프로그램, 교정프로그램, 측정프로그램 등으로 구성하였다. 그리고 시스템의 정확한 교정을 위하여 2점 교정방식을 사용하였고, 1점 보정방식을 추가 적용하여 측정의 정확성을 높이고자 하였다. 시스템의 평가를 위하여 각 전극의 감응특성을 조사하였다. 그리고 정확도 평가를 위하여 표준용액을 이용하여 측정실험을 하고 통계적인 분석을 하였다. 그 결과 계수변화율이 1.12이내이었고, 최대오차가 1.298%이내인 정확도를 나타내었으며, 휴대형 ABGA의 개발 가능성을 확인하였다.

• Ocean Science Journal
• /
• 제43권1호
• /
• pp.1-7
• /
• 2008

Physical and biological environmental variations in the East Sea were investigated by analysing time-series of oceanographic data and meteorological indices. From 1971 to 2000, dominant periodicity in water temperature variations had two apparent periods of 3 to 4 years and of decades, especially in the southwestern part of the East Sea affected by the influence of inflowing Tsushima warm current. Fluctuating water temperature within a certain period appears to respond to El $Ni{\tilde{n}}o$ events with a time lag. It was found that there was a strong correlation between water temperature and El $Ni{\tilde{n}}o$ events with a time lag of 1.5 and 5.5 years for periods of 3 to 6 years and of decades, respectively. Corresponding with El $Ni{\tilde{n}}o$ events, water temperature variability also showed strong correlation with shift and/or changes in biological and chemical environments of nutrient concentrations, zooplankton biomass, and fisheries. However, there also occurred a short-term periodicity of water temperature variations. Within a period of 1 to 4 years, a relatively short-term cycle of water temperature variation had strong correlation with other climate indices such as Pacific Decadal Oscillation and monsoon index. After comparing coherence and phase spectrum between water temperature and different climate indices, we found that there was a shift of coherent periods to another climate index during the years when climate regime shift was reported.

• Earthquakes and Structures
• /
• 제27권1호
• /
• pp.17-29
• /
• 2024

The traditional double story isolated structure is a derivative of the base isolated and inter-story isolated structures, while the new double story isolated structure represents a novel variation derived from the traditional double story isolated structure. In order to investigate the seismic response of the new double story isolated structure, a comprehensive structural model was developed. Concurrently, models for the basic fixed, base isolated, inter-story isolated, and traditional double story isolated structures were also established for comparative analysis. The nonlinear dynamic time-history response of the new double story isolated structure under rare earthquake excitations was analyzed. The findings of the study reveal that, in comparison to the basic fixed structure, the new double story isolated structure exhibits superior performance across all evaluated aspects. Furthermore, when compared to the base isolated and inter-story isolated structures, the new double story isolated structure demonstrates significant reductions in inter-story shear force, top acceleration, and inter-frame displacement. The horizontal displacement of the new double story isolated structure is primarily localized within the two isolation layers, effectively dissipating the majority of input seismic energy. In contrast to the traditional double story isolated structure, the new design minimizes displacements within the inter-isolation layer situated in the central part of the frame, as well as mitigates the overturning forces acting on the lower frame column. Consequently, this design ensures the structural integrity of the core tube, thereby preventing potential collapse and structural damage.

• 한국근적외분광분석학회:학술대회논문집
• /
• 한국근적외분광분석학회 2001년도 NIR-2001
• /
• pp.1126-1126
• /
• 2001

The paper presented here is the initial part of a larger study, in which it was determined which quality parameters in cheese powder could already be predicted by NIR at an early stage in the process and which could only be predicted at the final stages of the process. This initial study was performed in order to establish the levels and nature of variation within and between batches such that the subsequent data collection could be tackled optimally. The perspectives evolved into more than was originally planned and revealed some interesting uses of NIR-technology. Cheese powder production starts as a batch process, where waste cheese from other dairies is melted down in a vat. The process then turns into a continual process as the vat is emptied and the melted cheese is then filtered, homogenized, pasteurized and finally spray dried. Between each batch the powder is to a greater or lesser degree a mixture of 2 batches. This paper is divided into 2 aspects, one regarding the optimization of sampling time and the other is a study of process dynamics. Optimizing sampling time This initial study included 9 powder samples from 9 different batches produced during one day. The raw materials for the batches were chosen with the aim of creating a relatively high level of variation in the data. The total of 81 samples were taken out at regular intervals and spectra were collected on a NIR-systems 6500 instrument. The subsequent reduction of the data by PCA to score values shows the power of NIR as a tool to determine not only when samples are representative of a certain batch, but also which batches are stable enough to include in a further study. Studying process dynamics To take this experiment a step further 1 of the 81 samples were sent to the laboratory for further analyses. The samples were chosen on the criteria that they covered the spectral variation in the dataset. These samples were analysed for 4 chemical components and 5 physical attributes, which are essential for describing the quality of the product. The latent structure of the 7 samples, using the chemical and physical variables, is totally comparable to the latent structure of the NIR spectra. This outcome makes it possible to describe the dynamics of one day's production both chemically and physically with relatively little resources. Additionally it raises the question as to whether reference values are needed, as the latent structure of the NIR-spectra appears to be sufficient in providing information on the quality of the product. To be able to use NIR in this way would require defining quality limits in the principal component space as opposed to each of the reference values. The potential of NIR applied in an explorative fashion with batch processes opens a whole new gateway for the use of this technology. This study explains yet again after so many years in the field “why I'm crazy about NIR!”.