• International journal of advanced smart convergence
• /
• v.4 no.1
• /
• pp.71-87
• /
• 2015

Mobile users want to be provided with undisrupted network services when they navigate on the Next-Generation (NG) wireless networks. For that, interlocking with a heterogeneous network is important, but there have been few studies on the method for guaranteeing global mobility. Thus, this paper proposes the Proxy-LMA technique, the mobile IP-based global inter-networking system, to enhance global mobility and interoperability within the Next-Generation (NG) network environment. The purpose of the proposed Proxy-LMA system is to expand the boundary of the mobility with regards to the existing mobility management protocol (PMIPv6 and MIPv6) in order to guarantee global mobility and interoperability within the heterogeneous network environment. The results of the performance evaluation showed that the proposed Proxy-LMA system was more efficient than other methods from the standpoint of signaling cost and delay in the heterogeneous network environment.

• The KIPS Transactions:PartC
• /
• v.10C no.3
• /
• pp.355-366
• /
• 2003

Today's market share of mobile internet service is growing rapidly in internet due to the rapid advances in wireless mobile networks. To guarantee for QoS of Mobile Nodes in wireless mobile networks, we propose the Proxy MRSVP (PMRSVP) which is efficient resource reservation protocol. The PMRSVP using a modified regional registration restrains excessive message generation from existing protocols that propose an alternative plan of existing best effort service in wireless mobile networks. We show that signaling message generation quantities and resource registration costs of the PMRSVP are lower than MRSVP and Hierarchical MRSVP (HMRSVP) because as Mobile Agent (MA) plays a proxy role instead of Corresponding Host (CH). We evaluate resource reservation cost with registration cost of intradomain and interdomain of the proposed method in the paper by comparing to that of the MRSVP and HMRSVP.

• Journal of Information Processing Systems
• /
• v.14 no.3
• /
• pp.771-789
• /
• 2018

In heterogeneous wireless networks supporting multi-access services, selecting the best network from among the possible heterogeneous connections and providing seamless service during handover for a higher Quality of Services (QoSs) is a big challenge. Thus, we need an intelligent vertical handover (VHO) decision using suitable network parameters. In the conventional VHOs, various network parameters (i.e., signal strength, bandwidth, dropping probability, monetary cost of service, and power consumption) have been used to measure network status and select the preferred network. Because of various parameter features defined in each wireless/mobile network, the parameter conversion between different networks is required for a handover decision. Therefore, the handover process is highly complex and the selection of parameters is always an issue. In this paper, we present how to maximize network utilization as more than one target network exists during VHO. Also, we show how network parameters can be imbedded into IEEE 802.21-based signaling procedures to provide seamless connectivity during a handover. The network simulation showed that QoS-effective target network selection could be achieved by choosing the suitable parameters from Layers 1 and 2 in each candidate network.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.12 no.4
• /
• pp.211-221
• /
• 2012

The development of wireless sensor networks (WSNs) is progressed slowly due to limited resources, but it is in progress to the development of the latest IP-based IP-WSN by the development of hardware and power management technology. IPv6 over Low power WPAN (6LoWPAN) is capable of IPv6-built low-power devices. In these IP-based WSNs, existing IP-based techniques which was impossible in WSNs becomes possible. 6LoWPAN is based on the IEEE 802.15.4 sensor networks and is a IPv6-supported technology. Host-based mobility management scheme in IP-WSNs are not suitable due to the additional signaling, network-based mobility management scheme is more suitable. In this paper, we propose an enhanced PMIPv6-based route optimization scheme which consider multi-6LoWPAN network environments. All SLMA (Sensor Local Mobility Anchor) of the 6LoWPAN domain are connected with the SPIG (Sensor Proxy Internetworking Gateway) and performs distributed mobility control for the 6LoWPAN-based inter-domain operations. All information of SLMA in 6LoWPAN domain is maintained by SMAG (Sensor Mobile Access Gateway), and then is performed the route optimization quickly. The status information of the route optimization from SPIG is stored to SLMA and it is supported without additional signaling.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.49 no.1
• /
• pp.1-10
• /
• 2012

Mobility and quality of service (QoS) are becoming the more important issues in wireless communications. The traditional Internet service is expanding into new access media and applications. Since wireless communication services are accompanied by frequent handovers at remote sites, scalable and fast handover has become a prerequisite for ubiquitous communication. In this paper, the differentiated service (Diffserv) model is deployed in heterogeneous proxy mobile IPv6 (PMIPv6) networks to satisfy the QoS guaranteed service and fast handover requirements. The operational procedures for QoS guaranteed global roaming are presented. In addition, QoS management and handover cost evaluation schemes based on a mobile host's movement scope are proposed. This paper analyzes the reduction in handover delay in a network-based localized mobility management framework. We propose and analyze a PMIPv6 optimized with a global mobile access gateway (G-MAG), which is a network-based entity, to further improve the handover performance in terms of handover delay while maintaining minimal signaling overhead in the air interface among converged heterogeneous wireless networks. The handover signaling procedures with host-based MIPv6 are compared with network-based proxy MIPv6 (PMIPv6) and fast PMIPv6 assisted by G-MAG to show how much handover delay reduction can be achieved. Analytical results show that the handover delay is significantly reduced.

• Journal of Korea Society of Industrial Information Systems
• /
• v.17 no.1
• /
• pp.31-38
• /
• 2012

Next generation cellular applications and smart phone usage generate very heavy wireless data traffic. It becomes ineluctable for mobile network operators to have multiple core network entities such as Serving Gateway and Packet Data Network Gateway in 4G-LTE to share this high traffic generated. A typical configuration consists of multiple serving gateways behind a load-balancer which would determine which serving gateway would service a end-users'request. Such hardware is expensive, has a rigid policy set, and is a single point of failure. Another perspective of today's increasingly high data traffic is that besides it is being widely accepted that the high bandwidth L TE provides is creating bottlenecks for service providers by the increasing user bandwidth demands without creating any corresponding revenue improvements, a hidden problem that is also passively advancing on the newly emerging 4G-LTE that may need more immediate attention is the network signaling traffic, also known as the control-plane traffic that is generated by the applications developed for smartphones and tablets. With this as starting point, in this paper, we propose a solution, by a new approach considering OpenFlow switch connected to a controller, which gains flexibility in policy, costs less, and has the potential to be more robust to failure with future generations of switches. This also solves the problem of scaling the control-plane traffic that is imperative to preserve revenue and ensure customer satisfaction. Thus, with the proposed architecture with OpenFlow, mobile network operators could manipulate the traffic generated by the control-plane signaling separated from the data-plane, besides also reducing the cost in installing multiple core-network entities.

• Proceedings of the KSR Conference
• /
• 2006.11b
• /
• pp.1454-1460
• /
• 2006

This paper assesses communication performance using a roaming simulator when roaming occurs between onboard and ground wireless communication devices for communication based train control system (CBTC). Generally, CBTC is defined as the system regularly collecting location and speed data from each train, transmitting distance information to a train, and optimizing train speed according to train performance. When a train is moving, roaming is also performed to continuously transmit and receive train control information between the ground controller and the train. To operate CBTC, packet loss rate should be less than 1%, roaming time less than 100ms during roaming. We developed a roaming simulator to check communication performance before installing ground and onboard equipments on actual wireless sections. The roaming simulator to be introduced in this paper is for roaming simulation before conducting CBTC field test, which is the project to develop Urban Rail Signaling System Standards, being conducted in KRRI. The simulation consists of one onboard wireless communication device and three ground wireless communication devices, and the roaming simulator estimate packet loss rate occurring during roaming process of the two devices. Therefore, if you use the roaming simulator before the field test, you can predict various problems to occur in actual environment and reduce time, cost and people necessary to resolve these problems.

• KIPS Transactions on Computer and Communication Systems
• /
• v.1 no.2
• /
• pp.87-98
• /
• 2012

In recent years, there are many data and multimedia services that are supported by WiFi-enabled mobile devices. As a result, the demand for the ability to connect to the Internet anywhere is rapidly increasing and network infrastructure is becoming increasingly important. The design of cost-efficient network mobility (NEMO) protocol is intended to reduce the demand for limited wired/wireless network bandwidth at the signaling of mobility support and packet delivery operations. In this paper, we propose a cost-effective inter-LMA domain mobility management scheme which provides fast handover with multicasting support in NEMO environments. And our Fast PR-NEMO scheme is compared with N-PMIPv6, rNEMO, and PR-NEMO. In conclusion, our proposed scheme shows the best performance in terms of location updating cost, and packet tunneling cost.

• Proceedings of the KSR Conference
• /
• 2005.11a
• /
• pp.82-87
• /
• 2005

The new technology with Wireless LAN (WLAN) is implemented to the railway system, which is attached importance to safety and reliability. Railway control system based on WLAN that is called CBTC (Communication Based Train Control) is being developed by the advanced nations in this field and The system is applied to a new train line and a renovation for outworn equipment. The CBTC system has many merits about increase of capacity, reduction of headway and cost reduction etc.. Therefore, that is come into spotlight to the advanced railway company and the companies have being developed the system. So, we have developed the CBTC system for standardization and localization of the railway signal system.

• Journal of KIISE:Information Networking
• /
• v.32 no.5
• /
• pp.551-560
• /
• 2005

To reduce the amount of the signaling messages occurred in movement, HMIPv6 has been introduced as the hierarchical mobility management architecture tor MIPv6 by regarding the locality of movements. When approaching the visited link, the authentication procedure should be done successfully prior to any motility support message exchanges. The AAA(Authentication, Authorization and Account) authentication service is applied gradually to the wireless LAN and Cellular networks. However, It may bring about the service latency for the sessions of requiring the real-time processing due to not providing the optimized signaling in local and frequent movements. In this paper, we propose the authentication architecture with 'delegation' scheme to reduce the amount of signaling message and latency to resume for local movements by integrating it with HMIPv6 architecture. We provide the integrated authentication model and analyze the performance and effectivity of our proposal and finally offer the analysis materials comparing to the exiting authentication scheme. It cuts down the cost to $33.6\%$ at average measurement.