• 한국정보통신학회:학술대회논문집
• /
• 한국해양정보통신학회 2011년도 추계학술대회
• /
• pp.843-845
• /
• 2011

배터리 기반 센서네트워크의 짧은 수명으로 인하여, 최근 환경 에너지 수집형 센서 네트워크들이 활발히 연구되고 있다. 본 논문에서는 목표 응용 시스템에 최적화된 태양에너지 기반 센서 네트워크를 구현하기 위하여, 각 센서 노드의 시스템 수준의 요구사항을 도출하고 분석한다. 아울러 우리가 실제 구현된 태양 에너지 기반 센서 노드의 HW/SW 컴퍼넌트들이 위의 요구사항들을 어떻게 만족시키는지 살펴본다.

• Journal of Internet Technology
• /
• 제19권6호
• /
• pp.1801-1810
• /
• 2018

In this study, an energy-aware data-replication is proposed to effectively support a mobile sink in a solar-powered wireless sensor network (WSN). By utilizing the redundant energy efficiently, the proposed scheme shares the gathered data among the cluster heads using a backbone network, in order to increase data-reliability. It also maintains a backup cluster head in each cluster to enhance topological resilience. The simulation result showed that, compared to conventional clustering techniques, the proposed scheme decreases the total amount of data loss from the mobile sink as well as saving its energy (by reducing its moving distance), while minimizing the unexpected blackout time of the sensor node.

• 한국정보통신학회논문지
• /
• 제26권1호
• /
• pp.176-179
• /
• 2022

In this paper, we consider a sectorized wireless powered sensor network (WPSN), wherein sensor nodes are clustered based on sectors and transmit data to the cluster head (CH) using energy harvested from a hybrid access point. We construct a system model for this sectorized WPSN and find optimal coordinates of CH that maximize the achievable transmission rate of sensing data. To obtain the optimal CH with low overhead, we perform an asymptotic geometric analysis (GA). Simulation results show that the proposed GA-based CH selection method is close to the optimal performance exhibited by exhaustive search with a low feedback overhead.

• Journal of international Conference on Electrical Machines and Systems
• /
• 제1권2호
• /
• pp.111-115
• /
• 2012

In this paper, a solar energy powered bicycle linked to a wireless sensor network (WSN) which monitors the transfer of solar energy to an electrical energy storage unit and an analysis of its effectiveness is proposed. In order to achieve this goal, a solar-powered bicycle with an attached ZigBee and a far-end wireless network supervisory system is setup. Experimental results prove that our prototype, solar energy powered bicycle, can achieve enough solar energy for charging a two lead-acid battery pack. As a result, the user, through use of a wireless network in the parking period can be kept aware of the data on the amount of immediate solar radiation, the degree of illumination, the ambient temperature, and electrical energy storage capacity information of the bicycle through an internet interface.

• 한국컴퓨터정보학회논문지
• /
• 제22권5호
• /
• pp.81-88
• /
• 2017

Solar-powered wireless sensor nodes can use extra energy to obtain additional data to increase the precision. However, if the amount of data sensed is increased indiscriminately, the overhead of relay nodes may increase, and their energy may be exhausted. In this paper, we introduce a sensing and compression rate selection scheme to increase the amount of data obtained while preventing energy exhaustion. In this scheme, the neighbor nodes of the sink node determine the limit of data to be transmitted according to the allocated energy and their descendant nodes, and the other nodes select a compression algorithm appropriate to the allocated energy and the limitation of data to be transmitted. A simulation result verifies that the proposed scheme gathers more data with a lower number of blackout nodes than other schemes. We also found that it adapts better to changes in node density and the amount of energy harvested.

• 한국멀티미디어학회논문지
• /
• 제18권8호
• /
• pp.909-914
• /
• 2015

In wireless sensor networks, sensor nodes have a short transmission range and data is transferred from source to destination node using the multi-hop transmission. Sensor nodes are powered by battery and the link qualities are different, and the routing protocol in the wireless sensor network is one of the important technical issues. Multipath routing was proposed to reduce the data congestion and increase data throughput. In the multipath routing, however, each path can be interfered by the other path, and it can aggravate network performance. In this paper, we propose the multipath routing scheme for multi-rate wireless sensor networks. The multipath routing selects transmission paths to minimize transmission delay and path interference.

• 한국멀티미디어학회논문지
• /
• 제21권5호
• /
• pp.592-598
• /
• 2018

In wireless sensor networks where there is no centralized base station, each node has limited transmission range and the multi-hop routing for transmitting data to the destination is the one of the important technical issues. In particular, the wireless sensor network is not powered by external power source but operates by its own battery, so it is required to maximize the network life through efficient use of energy. To balance the power consumption, the residual power based adaptive power control is required in routing protocol. In this paper, we propose a routing protocol that prolongs the network lifetime by balancing the power consumption among the nodes by controlling the transmit power according to the residual power. We evaluate the proposed routing protocol using extensive simulation, and the results show that the proposed routing scheme can balance the power consumption and prolong network lifetime.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2005년도 학술대회 논문집 정보 및 제어부문
• /
• pp.264-266
• /
• 2005

Recently, on-line diagnosis methods through wired and wireless networks are widely adopted in the diagnosis of industrial Electric Facilities, such as generators, transformers and motors. Also smart sensors which includes sensors, signal conditioning circuits and micro-controller in one board are widely studied in the field of condition monitoring. This paper suggests an self-powered system suitable for condition-monitoring smart sensors, which uses parasitic vibrations of the facilities as energy source. First, vibration-driven noise patterns of the electric facilities are presented. And then, an electromagnetic generator which uses mechanical mass-spring vibration resonance are suggested and designed. Finally energy consumption of the presented smart sensor, which consists of MEMS vibration sensors, signal conditioning circuits, a low-power consumption micro-controller, and a ZIGBEE wireless tranceiver, are presented. The usefulness and limits of the presented electromagnetic generators in the field of electric facility monitoring are also suggested.

• 한국컴퓨터정보학회논문지
• /
• 제22권10호
• /
• pp.55-62
• /
• 2017

In this paper, we proposes a multi-ring based mobile sink location scheme for solar-powered wireless sensor network (WSN). The proposed scheme maintains the multi-rings in which nodes keep the current location of sink node. With the help of nodes in multi-rings, each node can locate the sink node efficiently with low-overhead. Moreover, because our scheme utilizes only surplus energy of a node, it can maintain multiple rings without degrading any performance of each node. Experimental results show that the proposed scheme shows much better latency and scalability with lower energy-consumption than the existing single-ring based scheme.

• Journal of Information Processing Systems
• /
• 제6권4호
• /
• pp.501-510
• /
• 2010

Wireless sensor networks consist of sensor nodes which are expected to be battery-powered and are hard to replace or recharge. Thus, reducing the energy consumption of sensor nodes is an important design consideration in wireless sensor networks. For the implementation of an energy-efficient MAC protocol, a Sensor-MAC based on the IEEE 802.11 protocol, which has energy efficient scheduling, has been proposed. In this paper, we propose a Dynamic S-MAC that adapts dynamically to the network-traffic state. The dynamic S-MAC protocol improves the energy consumption of the S-MAC by changing the frame length according to the network-traffic state. Using an NS-2 Simulator, we compare the performance of the Dynamic S-MAC with that of the S-MAC protocol.