• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.21 no.11
• /
• pp.2015-2021
• /
• 2017

Recently, a lot of attention is fallen to IoT(Internet of Things) for hyper-connected society and the number of unlicensed wireless device has been increasing. Thus, this paper analyzed the impact of unlicensed wireless device on the basis of 802.11ah on licensed LTE user equipment in 900 MHz frequency band for efficient frequency use. As the interference analysis method, Minimum Coupling Loss (MCL) method and Monte Carlo (MC) method were used. In case of one interferer, minimum separation distance between interferer and victim was calculated as about 22 m through the MCL method under the assumption of the worst case. The maximum number of interferer to meet the interference probability of 5% below within a cell radius of the victim was computed as about 3000 by using MC method based on statistical technique. The analysis method and results in this paper are expected to be used for the coexistence between unlicensed wireless device and licensed wireless device.

• Journal of information and communication convergence engineering
• /
• v.17 no.3
• /
• pp.221-226
• /
• 2019

In this work, a transmitter/receiver front-end module (T/R FEM) with an automatic Tx/Rx switching scheme for a 2.4 GHz microwave power transfer is developed for a retro-reflective beamforming scheme. Recently, research on wireless power transfer techniques has moved to wireless charging systems for mobile devices. Retro-reflective beamforming is a good candidate for tracking the spatial position of a mobile device to be charged. In Tx mode, the T/R FEM generates a minimum of 1 W. It also comprises an amplitude and phase monitoring port for transmitting RF power. In Rx mode, it passes an Rx pilot signal from a mobile device to a digital baseband subsystem to recognize the position of the mobile device. The insertion loss of the Rx signal path is 4.5 dB. The Tx and Rx modes are automatically switched by detecting the Tx input power. This T/R FEM is a design example of T/R FEMs for wireless charging systems based on a retro-reflective beamforming scheme.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.16 no.3
• /
• pp.460-469
• /
• 2012

The WiMedia Alliance has specified a Distributed Medium Access Control (D-MAC) protocol based on UWB for high speed wireless home networks and WPANs. In this paper, we propose a novel cooperative communication protocol adaptive to current UWB link transmission rate. The proposed cooperative communication protocol has compatibility with current WiMedia D-MAC and Wireless USB standard and is executed at each device according to a Relay Node Selection (RNS) criterion.

• Journal of Advanced Navigation Technology
• /
• v.12 no.5
• /
• pp.444-450
• /
• 2008

With the advancement of the mobile device and arrival of the integrated wired/wireless environments, the damand for services accessible by mobile devices is rapidly increasing. However, unlike existing wired networks, communication in wireless networks has many weaknesses. Therefore, research and development into an appropriate security technology has reached a critical stage, as combined wired/wireless environments emerge. Therefor, in this paper, we propose that device authentication technology in AAA (Authentication, Authorization, Accounting) mechanism of Mobile environment for secure service offer.

• Journal of Digital Convergence
• /
• v.10 no.3
• /
• pp.265-271
• /
• 2012

This paper proposes a communication distance performance evaluation method for mobility of service robots equipped with a Wi-Fi module. Service robots have function of mobile communication system according to classified services and utilize a (preferred) communication method, wireless lan(IEEE802.11 a/b/gin) communication method of ISM band(2.4GHz and 5.8GHz). For evaluating degradation performance of wireless data for the service robot's mobility. We measured and presented reference vectors obtained by utilizing a distance attenuation correlation method in the real world environment. To evaluate performance of the proposed method, path loss of reference vectors was assigned to the Azimuth 301W and then transmission rate and the transmit throughput of the test sample were measured by the Chariot. The proposed measurement method is necessary for securing wireless LAN communication distance for mobility of mobile smart device and service robots. In addition, if the proposed measurement method os adopted, It would be expected that mobile smart device vendors would utilize the method as an effective wireless LAN mobility communication distance performance evaluation method.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.28 no.5
• /
• pp.382-390
• /
• 2017

In this paper, we consider particular exposure scenarios to evaluate human effects for inductive commercial wireless charging device operating at low frequency. The coil used in this study is the A10 model in Qi standard proposed by WPC(Wireless Power Consortium), and input power is 5 W to the operating frequency of 155 kHz. In perfectly aligned condition, the max leakage magnetic field is $257.58{\mu}T$ which is obtained at the side of the device, and it is exceeded about 7.4 times of the ICNIRP 1998 reference level. The SAR is evaluated with homogeneous phantom which has electric constants of wet skin. The max value of the SAR is $134.47{\mu}W/kg$ which is obtained at the side of the device also, and it is much lower than the international guidelines. Especially, it showed higher SAR values in case of misalignment condition, so we will need to consider the misalignment condition importantly when we evaluate human effects for wireless power transfer system.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.17 no.6
• /
• pp.1324-1329
• /
• 2013

The WiMedia Alliance has specified a Distributed Medium Access Control (D-MAC) protocol based on UWB for high speed wireless home networks and WPANs. In this paper, firstly, the fair SoQ-based Distributed Reservation Protocol (DRP) for D-MAC is analyzed. And a novel SoQ-based relay transmission protocol is proposed to overcome DRP conflicts fast. In the proposed protocol, each device executes the Satisfaction of QoS (SoQ) time slot allocation algorithm independently. And, in order to give the loser device due to DRP conflicts another chance to maintain QoS resources, the proposed relay transmission protocol helps the device reserve another indirect link maintaining the required QoS resources via a relay node.

• Journal of Satellite, Information and Communications
• /
• v.10 no.1
• /
• pp.12-16
• /
• 2015

In this paper, we introduce a wireless package system based on the amateur radio HR(HAM Radio) and satellite communication as a novel wireless disaster communication system and have configured a interference scenario receiving interference from adjacent base stations and D2D groups in the disaster network. In such interference scenarios, we propose a frequency re-allocation method to avoid interference and communicate with disaster networks by securing the channel capacity required between D2D terminals. As a result of computer simulation, we can find the proposed method has improved BED performance of a gain of 1.5dB and overall system throughput than conventional methods.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.7 no.7
• /
• pp.1483-1490
• /
• 2003

In existent industry spot, device administrators should be ever-ready for monitor and control of devices. Thus, it is inefficient because there are much human strength waste and time loss. To solve these problem, we develop a real time device management system based on wire and wireless internet. If any device brutes down, this system senses breakdown automatically and notify it to device administrators via mobile phones. Then the administrator does emergency measures for breakdown device though wire and wireless internet. For the purpose, we develop each local device control system. device management system, mobile system, and web system.

• Journal of Korea Society of Industrial Information Systems
• /
• v.14 no.2
• /
• pp.51-58
• /
• 2009

In this paper, a system which uses Bluetooth and Zigbee wireless communication and mobile device is designed. The temperature within vehicle and the distance betweeen the vehicle and the obstacle is measured by ultrasonic sensor system. The measured data is sent to the mobile PDA and displayed to assist safe driving.