• International Journal of Fuzzy Logic and Intelligent Systems
• /
• v.8 no.1
• /
• pp.11-17
• /
• 2008

Typical wireless sensor networks used in structural monitoring are continuous types wherein data transmission is progressive at all time that may include irrelevant and insignificant data and information. Continuous types of wireless monitoring systems often pose problems of handling large-sized data that may deteriorate the performance of the system. The proposed method is to suggest an event-triggered monitoring system that captures and transmits relevant data only. An error signal generated by the Principal Components Analysis (PCA) is utilized as an index for event detection and selective data transmission. With this new monitoring scheme, the remote server is relieved of unwanted data by receiving only relevant information from the wireless sensor networks. The performance of the proposed scheme was verified with simulation studies.

• Proceedings of the KIEE Conference
• /
• 2004.11c
• /
• pp.432-434
• /
• 2004

Bluetooth is a promising wireless personal area network technology and is on the verge of being ubiquitously deployed over wide range of devices. This paper aims to implement a wireless network for image transmission using Bluetooth technology. The characteristics of Bluetooth are small size, low band width and low power consumption, However, there are some difficulties in implementing a wireless radio network using Bluetooth since a lot of repeaters may needed when Bluetooth depends a role of host on personal computer for data transmission. In this paper, a method to implement a wireless radio network is proposed and applied for image transmission using a small size microprocessor for each Bluetooth.

• Journal of Advanced Navigation Technology
• /
• v.22 no.1
• /
• pp.37-42
• /
• 2018

Recently, there have been many studies on the IoT environment in which the sensors attached to the equipment automatically transmit and process the site information in real time through the network to control the equipment. The core of such a system is a network for data transmission and reception, and a wired network with wide transmission distance is a priority. However, in the case of a wired network, there is a problem that the time and cost consumed to configure the communication is higher than that of the wireless. In this paper, we propose LPWA - based wireless data transmission system using LPWA and BLE communication to solve this problem. The proposed system collects data from equipment through BLE and transmits data to the server using LPWA. Experimental results show that the spreading factor of maximum length of LPWA is 8, and the minimum length is 9.

• Journal of information and communication convergence engineering
• /
• v.10 no.4
• /
• pp.365-371
• /
• 2012

In recent years, researchers have been attracted to clustering methods to improve communication and data transmission in a network. Compared with traditional wireless networks, wireless sensor networks are energy constrained and have lower data rates. The concept of implementing a clustering algorithm in an existing project on gateway relocation is being explored here. Low energy adaptive clustering hierarchy (LEACH) is applied to an existing study on relocating a gateway. The study is further improved by moving the gateway to a specific cluster based on the number or significance of the events detected. The protocol is improved so that each cluster head can communicate with a mobile gateway. The cluster heads are the only nodes that can communicate with the mobile gateway when it (the mobile gateway) is out of the cluster nodes' transmission range. Once the gateway is in range, the nodes will begin their transmission of real-time data. This alleviates the load of the nodes that would be located closest to the gateway if it were static.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2011.06a
• /
• pp.583-584
• /
• 2011

• Proceedings of the KIEE Conference
• /
• 2002.11c
• /
• pp.450-453
• /
• 2002

In emergency telemedicine system based on wireless communication system with limited transmission capacity, it is necessary to transmit the biological data (ECG, BP, Respiration, $SpO_2$) of the patient continuously and reliably in real time. For this service, it is necessary to data compression and error control. In this study, we designed an protocol for error control in application layer and implemented it on the biological data transmission program for an emergency telemedicine system based on wireless data communication system.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.38A no.4
• /
• pp.381-391
• /
• 2013

Wireless transmission of uncompressed video guarantees higher quality with lower latency than compressed video transmission. Although current wireless technologies cannot fully cover required data rates of about a few Gb/s for full high definition resolution, some wireless technologies such as ultra-wideband (UWB) provide 1 Gb/s data rate which is adequate for uncompressed video transmission in portable devices. In this paper, we propose an uncompressed video transmission system for wireless mirroring services in portable devices. We firstly simulated the performance of uncompressed video transmission using single or multiple 1 Gb/s UWB technology. Then we implemented hardware-based uncompressed video processing block and Gb/s wireless MAC accelerator. Finally, we show the implementation result and the demonstration of uncompressed HD video transmission using multiple 1 Gb/s UWB PHYs.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.49 no.4
• /
• pp.26-33
• /
• 2012

Please WBAN(Wireless Body Area Networks) is wireless communication of within 3 m radius from inside and outside of the body. WBAN is many uses IEEE 802.15.4 MAC protocol for WBAN MAC protocol requirements. IEEE 802.15.4 MAC protocol applies GTS(Guaranteed Time Slot) allocation scheme for guarantee packet delivery of application which requests QoS(Quality of Service). However, GTS allocation scheme of IEEE 802.15.4 MAC protocol uses FIFS(First In First Service) queueing. So it reduces data transmission reliability and has many problems. Therefore, IEEE 802.15.4 applies not WBAN MAC protocol for emergency data transmission. In this paper, we proposes a priority based MAC protocol for emergency data transmission in wireless body area networks. the proposal MAC protocol sets priority the data. So GTS reqeuest throughput of emergency data increasing and GTS allocation delay of emergency data decreasing.

• Wind and Structures
• /
• v.31 no.1
• /
• pp.21-29
• /
• 2020

The wind field measurement of severe winds such as hurricanes (or typhoons), thunderstorm downbursts and other gales is important issue in wind engineering community, both for the construction and health monitoring of the wind-sensitive structures. Although several wireless data transmission systems have been available for the wind field measurement, most of them are not specially designed for the wind data measurement in structural wind engineering. Therefore, the field collection is still dominant in the field of structural wind engineering at present, especially for the measurement of the long-term and high-frequency wind speed data. In this study, for remote wind field measurement, a novel wireless long-term and high-frequency wind data acquisition system with the functions such as remote control and data compression is developed. The system structure and the collector are firstly presented. Subsequently, main functions of the collector are introduced. Also novel functions of the system and the comparison with existing systems are presented. Furthermore, the performance of this system is evaluated. In addition to as the wireless transmission for wind data and hardware integration for the collector, the developed system possesses a few novel features, such as the modification of wind data collection parameters by the remote control, the remarkable data compression before the data wireless transmission and monitoring the data collection by the cell phone application. It can be expected that this system would have wide applications in wind, meteorological and other communities.

• ETRI Journal
• /
• v.42 no.3
• /
• pp.341-350
• /
• 2020

In a wireless sensor network (WSN), the data transmission technique based on the cooperative multiple-input multiple-output (CMIMO) scheme reduces the energy consumption of sensor nodes quite effectively by utilizing the space-time block coding scheme. However, in networks with high node density, the scheme is ineffective due to the high degree of correlated data. Therefore, to enhance the energy efficiency in high node density WSNs, we implemented the distributed source coding (DSC) with the virtual multiple-input multiple-output (MIMO) data transmission technique in the WSNs. The DSC-MIMO first compresses redundant source data using the DSC and then sends it to a virtual MIMO link. The results reveal that, in the DSC-MIMO scheme, energy consumption is lower than that in the CMIMO technique; it is also lower in the DSC single-input single-output (SISO) scheme, compared to that in the SISO technique at various code rates, compression rates, and training overhead factors. The results also indicate that the energy consumption per bit is directly proportional to the velocity and training overhead factor in all the energy saving schemes.