• 한국전자통신학회논문지
• /
• 제10권2호
• /
• pp.219-226
• /
• 2015

대표적인 4세대 이동통신 시스템으로서 LTE는 과거 이동통신 시스템에 비하여 훨씬 더 높은 전송 속도를 제공한다. 그러나 무선 환경의 특성 상 LTE가 제공하는 전송 속도는 무선 채널의 상태에 따라서 큰 영향을 받을 수 있다. LTE 시스템의 무선 접속을 통해서 제공되는 대부분의 서비스에 대한 사용자의 만족도는 전송속도에 일차적인 영향을 받게 된다. 따라서 본 논문에서는 무선 채널의 상태를 대표하는 다양한 품질 지표를 선정하고 이들에 대한 실체 측정을 실시하여 각 품질 지표의 변화에 대한 LTE 시스템의 전송 속도의 변화를 관찰하였다. 그 결과 채널의 상태가 나빠질수록 신호의 세기가 아닌 신호의 품질이 LTE 시스템이 제공하는 전송 속도에 밀접한 영향을 미친다는 사실을 알 수 있었다.

• 한국항행학회논문지
• /
• 제26권6호
• /
• pp.481-486
• /
• 2022

최근 IoT(Internet of Things)의 급속한 성장은 저 전력 무선 기술의 확산으로 이어지고 있다. IoT 무선 네트워크 설계의 주요 과제는 2.4 [GHz] ISM(Industrial Scientific Medical) 주파수 대역을 공유하는 서로 다른 무선 기술 간의 공존을 달성하는 것이다. 따라서 무선 네트워크의 신뢰성 향상과 무선 네트워크 사이의 공존 운용을 위한 연구가 필요하다. 특히, 다양한 산업 분야에서 장치 간의 연결 매체로 많은 활용이 예상되는 BLE(Bluetooth Low Energy) 무선 네트워크 환경에서 상호 서비스 공존을 위한 간섭 모델 및 성능에 대한 연구가 필요하다. 본 논문에서는 주거 및 산업용 무선 응용 분야에서 널리 사용되는 BLE 시스템의 물리적 계층을 중심으로 IEEE 802.15.4 시스템과의 동일채널간섭 모델을 설정하고 동일채널간섭 환경에서 BLE 무선 통신 시스템의 성능을 분석한다. 분석 결과, 잡음과 동일채널간섭이 존재하는 환경에서 간섭원과 BLE 시스템 사이의 거리가 증가함에 따라서 동일채널간섭의 양이 감소하여 BLE 시스템의 오율 성능은 개선됨을 알 수 있었다.

• 한국IT서비스학회지
• /
• 제11권2호
• /
• pp.291-306
• /
• 2012

Recently, Wireless Mesh Network (WMN) technology recently has been used in various industries. Especially, a number of multi-channel assignment schemes have been presented to improve the throughput of IEEE 802.11-based multi-hop WMN. However, performance of the conventional multi-channel assignment schemes is not enough to satisfy the industry requirements. We, thus, should study more about the multi-channel assignment scheme in order to enhance the performance. This paper proposes a novel channel assignment scheme that employs Multi-channel and Multi-Interface in the WMN. The proposed scheme can obtain the traffic information of the network and the efficient channel assignment result without any message exchanges. We verify the efficiency of the proposed scheme through the mathematical modeling and the real-world experiments. The results show that the proposed scheme improves the throughput of the network compared with the conventional schemes.

• 한국통신학회논문지
• /
• 제34권5A호
• /
• pp.355-362
• /
• 2009

In real-time communication services, delay constraints are among the most important QoS (Quality of Service) factors. In particular, it is difficult to guarantee the delay requirement over wireless channels, since they exhibit dynamic time-varying behavior and even severe burst-errors during periods of deep fading. Channel throughput may be increased, but at the cost of the additional delays when ARQ (Automatic Repeat Request) schemes are used. For real-time communication services, it is very essential to predict data deliverability. This paper derives the delay distribution and the successful delivery probability within a given delay budget using a priori channel model and a posteriori information from the perspective of queueing theory. The Gilbert-Elliot burst-noise channel is employed as an a Priori channel model, where a two-state Markov-modulated Bernoulli process $(MMBP_2)$ is used. for a posteriori information, the channel parameters, the queue-length and the initial channel state are assumed to be given. The numerical derivation is verified and analyzed via Monte Carlo simulations. This numerical derivation is then applied to a rate control scheme for real-time video transmission, where an optimal encoding rate is determined based on the future channel capacity and the distortion of the reconstructed pictures.

• Journal of electromagnetic engineering and science
• /
• 제12권1호
• /
• pp.77-84
• /
• 2012

This paper introduces our development of a MIMO-OTA system with simplified configuration. The key element of our proposal is the adoption of an antenna branch-controlled configuration for generating multipath delayed waves. The signal processing is carried out on IF band signal with an FPGA in a fading-emulator-type MIMO-OTA measurement system. The proposed scheme is largely different from available system configurations for the fading simulator method of constructing the OTA test environment. We describe the principle of the proposed scheme, channel model incorporated in the system, basic configuration of the developed system, and its performance.

• 한국통신학회논문지
• /
• 제33권2A호
• /
• pp.198-203
• /
• 2008

In this paper, we consider the diffuse type of indoor wireless optical communication (WOC) system. To find the channel characteristics of indoor wireless infrared communication system, we investigate the simulation process to get the impulse response of diffuse type and analyze the scenario of the indoor structure which we have built. The simulation results of the impulse response include power ratio and time delay due to bounce times. We get and discuss the receiving power distribution according to six configurations which have different transmitter and receiver positions and reflection coefficients of the indoor structure assumed. The results of this paper are useful to design the indoor wireless optical communication systems.

• ETRI Journal
• /
• 제34권3호
• /
• pp.319-329
• /
• 2012

Closed-loop transmit diversity is considered an important technique for improving the link budget in the third generation and future wireless communication standards. This paper proposes several transmit diversity algorithms suitable for small wireless terminals and presents performance assessment in terms of average signal-to-noise ratio (SNR) and outage improvement, convergence, and complexity of operations. The algorithms presented herein are verified using data from measured indoor channels with variable antenna spacing and the results explained using measured radiation patterns for a two-element array. It is shown that for a two-element array, the best among the proposed techniques provides SNR improvement of about 3 dB in a tightly spaced array (inter-element spacing of 0.1 wavelength at 2 GHz) typical of small wireless devices. Additionally, these techniques are shown to perform significantly better than a single antenna device in an indoor channel considering realistic values of latency and propagation errors.

• 한국멀티미디어학회논문지
• /
• 제11권12호
• /
• pp.1716-1721
• /
• 2008

Currently, Wireless Networks have some nice characteristics such as multi-hop, multi-channel, multi-radio, etc but these kinds of resources are not fully used. The most difficulty to solve this issue is to solve mixed integer optimization. This paper proposes a method to solve a class of mixed integer optimization for wireless networks by using AMPL modeling language with CPLEX solver. The result of method is scheduling and congestion control in multi-channel multi-radio wireless networks.

• Journal of Communications and Networks
• /
• 제6권2호
• /
• pp.123-132
• /
• 2004

The various challenges to realize a fixed wireless ATM network are discussed and some solutions for these challenges are presented. In this paper, the capacity allocation in wireless ATM, the wireless link impact on ATM traffic, and the optimum utilization of the wireless network resonrces for a line of sight (LOS) winless ATM link are studied. An adaptive MQAM modulator is introduced to provide a suitable solution to these issues. The modulator level is adjusted using a unique QoS metric in a wireless network. The metric, termed modified effective bandwidth, takes into account the bandwidth demand, QoS requirements, and outage conditions of the wireless ATM link. A performance study using VBR MPEG-l video traffic in a fixed wireless channel (Ricean channel) demonstrates the advantages of the proposed system.

• 한국정보통신학회:학술대회논문집
• /
• 한국해양정보통신학회 2008년도 춘계종합학술대회 A
• /
• pp.47-50
• /
• 2008

Multiple-input multiple-output (MIMO) is an efficient technology to increase data rate in wireless networks due to bandwidth and power limitations. Data transmission rate between transmitter and receiver is determined by channel capacity. MIMO has anadvantage of reliable communication over wireless channel because of utilizing the channel capacity properly. In this letter, we drive a new formula, closed form capacity formula, using confluent hypergeometric function.