• Journal of the Korea Institute of Information Security & Cryptology
• /
• v.19 no.3
• /
• pp.3-10
• /
• 2009

In this paper, we introduce improved differential and linear attacks on the SMS4 block cipher which is used in the Chinese national standard WAPI (WLAN Authentication and Privacy Infrastructure, WLAN - Wireless Local Area Network): First, we introduce how to extend previously known differential attacks on SMS4 from 20 or 21 to 22 out of the full 32 rounds. Second, we improve a previously known linear attack on 22-round reduced SMS4 from $2^{119}$ known plaintexts, $2^{109}$ memory bytes, $2^{117}$ encryptions to $2^{117}$ known plaintexts, $2^{l09}$ memory bytes, $2^{112.24}$ encryptions, by using a new linear approximation.

• International Journal of Computer Science & Network Security
• /
• v.21 no.6
• /
• pp.23-28
• /
• 2021

The article discusses the features of adaptation of the parameters of the physical layer of data transmission in self-organizing networks based on unmanned aerial vehicles operating in the conditions of "smart cities". The concept of cities of this type is defined, the historical path of formation, the current state and prospects for further development in the aspect of transition to "smart cities" of the third generation are shown. Cities of this type are aimed at providing more comfortable and safe living conditions for citizens and autonomous automated work of all components of the urban economy. The perspective of the development of urban mobile automated technical means of infocommunications is shown, one of the leading directions of which is the creation and active use of wireless self-organizing networks based on unmanned aerial vehicles. The advantages of using small-sized unmanned aerial vehicles for organizing networks of this type are considered, as well as the range of tasks to be solved in the conditions of modern "smart cities". It is shown that for the transition to self-organizing networks in the conditions of "smart cities" of the third generation, it is necessary to ensure the adaptation of various levels of OSI network models to dynamically changing operating conditions, which is especially important for the physical layer. To maintain an acceptable level of the value of the bit error probability when transmitting command and telemetry data, it is proposed to adaptively change the coding rate depending on the signal-to-noise ratio at the receiver input (or on the number of channel decoder errors), and when transmitting payload data, it is also proposed to adaptively change the coding rate together with the choice of modulation methods that differ in energy and spectral efficiency. As options for the practical implementation of these solutions, it is proposed to use an approach based on the principles of neuro-fuzzy control, for which examples of determining the boundaries of theoretically achievable efficiency are given.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.25 no.8
• /
• pp.1088-1094
• /
• 2021

This paper proposes a partial BMA (Broadcasting Multiple Access) network structure and D-ARP (Distributed Address Resolution Protocol) method in order to support full mesh routing function in the DAMA (Demand Assigned Multiple Access)-based MF-TDMA (Multi Frequency-Time Division Multiple Access) satellite system. The partial BMA network enables legacy router devices and routing protocols to be adopted in the satellite communication system, and decreases the amount of routing protocol overhead. In addition, we introduce the D-ARP method that help a spoke satellite node acquiring the MAC (Media Access Control) address from remote satellite nodes in none BMA satellite network. The D-ARP method provides the MAC address of remote nodes to each other nodes through the broadcasting-enabled satellite channel. And we lastly evaluate and analysis the network performance of the proposed approach.

• Korean Journal of Applied Biomechanics
• /
• v.33 no.1
• /
• pp.10-16
• /
• 2023

Objective: The purpose of this was to find out the muscle activity of the quadriceps femoris by gender when sitting on a chair while performing stairs gait (US; Up-stairs, DS; Down-stairs). Method: 13 male subjects (age: 22.00 ± 1.68 yrs, height: 174.85 ± 6.10 cm, weight: 68.15 ± 9.83 kg) and 15 female subjects (age: 21.17 ± 1.58 yrs, height: 168.20 ± 5.55 cm, weight: 55.73 ± 6.94 kg) participated in this study. The study used wireless three channel EMG. Results: In this study, there was no gender difference in quadriceps femoris activity during the US and DS periods, and there was no significant difference between the male group before and after postural maintenance during the US and DS periods. The quadriceps muscle of the female group also did not show a significant difference before and after US sitting. However, the vastus medialis muscle activity during DS in the female group was significantly lower after application than before application of maintaining a sitting posture (p<.05). There was no interaction effect between the 15-minute sitting position application and gender. Conclusion: Our results demonstrate that sitting in a chair affects the transient functioning of the quadriceps muscle in women. Therefore, emphasize the need for active rest when sitting in a chair for long periods of time.

• Journal of Advanced Navigation Technology
• /
• v.27 no.2
• /
• pp.203-208
• /
• 2023

In this study, we propose a method to improve the precision of contact resistance measurement circuits using constant current method and voltage drop method, and implement a dashboard that monitors the measured data of contact resistance measurement systems through MQTT broker server. The contact resistance measurement system measures the resistance value and transmits the measured value to the MQTT broker server using wireless communications. This developed dashboard uses Node-RED and Node-RED-Dashboard to receive the resistance values of up to four contact resistance measurement systems and show them to user's monitor screen. Users can manage multiple measurement data using a single dashboard and easily interface with other devices through the MQTT broker server. Through the experimental results from real data measurements, the relative standard deviation about precision is improved to average 40.37% and maximum 64.73% respectively.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2021.10a
• /
• pp.469-471
• /
• 2021

As wireless communication technology advances to ensure high accuracy and safety at high speeds, research and development of Visible Light Communication (VLC) technology has been accelerated as an alternative to traditional radio frequency (RF) technology. As the radio spectrum of RF communication becomes more congested and demand for bandwidth continues to increase, VLCs that can use unlicensed frequency band are proposed as a solution. However, VLC channels have broadcasting characteristics that make them easily exposed to eavesdropping and jamming attacks, and are vulnerable to MITM (Man-In-The-Middle) due to their line of sight (LOS) propagation characteristics. These attacks on VLC channels compromise the confidentiality, integrity, and availability of communications links and data, resulting in higher data retransmission rates, reducing throughput and increasing power consumption, resulting in lower data transmission efficiency. In this work, we model vulnerable VLC channels to analyze the impact of attacks and communications vulnerabilities by malicious jammers.

• Korean Journal of Applied Biomechanics
• /
• v.34 no.1
• /
• pp.25-33
• /
• 2024

Objective: The purpose of this study was to compare the lower extremity muscle activity and knee joint load according to movement speed conditions during the barbell back squat. Method: Nine males with resistance training experience participated in this study. Participants performed the barbell back squat in three conditions (Standard, Fast, and Slow) differing movement speed. During the barbell back squat, muscle activity of the rectus femoris (RF), vastus lateralis (VL), vastus medialis (VM), biceps femoris long head (BFL), semitendinosus (ST), gluteus maximus (GM), gastrocnemius (GCN), and tibialis anterior (TA) was collected using an 8 channel wireless EMG system. The peak flexion angle of the lower extremity joints and the peak resultant joint force in each direction of the knee joint were calculated using eight motion capture cameras and ground reaction force plates. This study was to used the Friedman test and the Wilcoxon signed rank test, to compare lower extremity muscle activity and peak resultant joint force at knee joint according to movement speed conditions during the barbell back squat, and the statistical significance level was set at .01. Results: In the downward phase of the barbell back squat, the RF and TA showed the higher muscle activity in the fast condition, and in the upward phase, RF, VL, VM, BFL, ST, GM, and TA showed the higher muscle activity in the fast condition. As a results, analyzing of the load on the knee joint, in the downward phase, and in the upward phase, the higher peak compressive force of the knee joint was showed in the fast condition. Conclusion: The barbell back squat with fast movement speed was more effective due to increased muscle activity of lower extremity, but one must be careful of knee joint injuries because the load on the knee joint may increase during the barbell back squat with fast movement speed.

• Journal of IKEEE
• /
• v.25 no.1
• /
• pp.156-167
• /
• 2021

In this paper, we propose a digital transceiver unit design for in-building of 5G optical repeaters that extends the coverage of 5G mobile communication network services and connects to a stable wireless network in a building. The digital transceiver unit for driving the proposed 5G optical repeater is composed of 4 blocks: a signal processing unit, an RF transceiver unit, an optical input/output unit, and a clock generation unit. The signal processing unit plays an important role, such as a combination of a basic operation of the CPRI interface, a 4-channel antenna signal, and response to external control commands. It also transmits and receives high-quality IQ data through the JESD204B interface. CFR and DPD blocks operate to protect the power amplifier. The RF transmitter/receiver converts the RF signal received from the antenna to AD, is transmitted to the signal processing unit through the JESD204B interface, and DA converts the digital signal transmitted from the signal processing unit to the JESD204B interface and transmits the RF signal to the antenna. The optical input/output unit converts an electric signal into an optical signal and transmits it, and converts the optical signal into an electric signal and receives it. The clock generator suppresses jitter of the synchronous clock supplied from the CPRI interface of the optical input/output unit, and supplies a stable synchronous clock to the signal processing unit and the RF transceiver. Before CPRI connection, a local clock is supplied to operate in a CPRI connection ready state. XCZU9CG-2FFVC900I of Xilinx's MPSoC series was used to evaluate the accuracy of the digital transceiver unit for driving the 5G optical repeater proposed in this paper, and Vivado 2018.3 was used as the design tool. The 5G optical repeater digital transceiver unit proposed in this paper converts the 5G RF signal input to the ADC into digital and transmits it to the JIG through CPRI and outputs the downlink data signal received from the JIG through the CPRI to the DAC. And evaluated the performance. The experimental results showed that flatness, Return Loss, Channel Power, ACLR, EVM, Frequency Error, etc. exceeded the target set value.

• Journal of Internet Computing and Services
• /
• v.11 no.6
• /
• pp.61-72
• /
• 2010

Spectrum scarcity problem and increasing spectrum demand for new wireless applications have embossed the importance of cognitive radio technology; the technology enables the sharing of channels among secondary (unlicensed) and primary (licensed) users on a non-interference basis after sensing the vacant channel. To enhance the accuracy of sensing, distributed spectrum sensing is proposed. However, it is necessary to provide the robustness against the compromised sensing nodes in the distributed spectrum sensing. RDSS, a fusion mechanism based on the reputation of sensing nodes and WSPRT (weighted sequential probability ratio test), was proposed. However, in RDSS, the execution number of WSPRT could increase according to the order of inputted sensing values, and the fast defense against the forged values is difficult. In this paper, we propose an enhanced fusion mechanism to input the sensing values in reputation order and exclude the sensing values with the high possibility to be compromised, using the trend of reputation variation. We evaluate our mechanism through simulation. The results show that our mechanism improves the robustness against attack with the smaller number of sensing values and more accurate detection ratio than RDSS.

• Journal of Distribution Research
• /
• v.11 no.1
• /
• pp.99-124
• /
• 2006

The purposes of the study are two-folds. First, it analyzes how factors other than price(e.g. delivery service, saving point policies, free gifts) impact total price for various products and different types of stores. Second, it analyzes how to increase market efficiencies through price level, price differences, and the frequency of price changes for different shops, various products and different types of transactions. By analyzing the price level within different types of stores, there found that prices at on-line store were lower than off-line shops. It also found price differences between pure on-line, hybrid, and off-line store. Comparing prices by product size, there found that pure on-line shops have a lower price compared to others. The results showed that on-line store had lower price variation compared to off-line shops. When comparing pure on-line store to hybrid store, hybrid store had lower price variation. In terms of the frequency of price changes, hybrid stores had higher price fluctuations. In terms of total price differences for delivery distances, pure on-line store had great price fluctuation, excluding cosmetic goods. In conclusion, if we consider price level and price fluctuations, on-line store had more efficiencies and was superior in terms of price effectiveness. Hybrid shops, on the other hand, had greater advantages for seasonal goods and dominant products. Therefore, market entry strategies should differ based on order quantity, type of store(pure on-line, hybrid, off-line), product characteristics(seasonality, product life), etc.