• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2004년도 추계학술대회 논문집 전기설비전문위원
• /
• pp.71-76
• /
• 2004

This paper deals with the experimental results that apply to a new wire by an artificial flame-maker because it's difficult to directly analyze the characteristic of deterioration by a forest fire. Those results include tension load, extension rate and torsion number for a conductor. In addition, there's been an experiment and analysis about the mechanical characteristics of the wire of ACSR $48mm^2$ which was removed from Pohang area by a forest fire. Then, the database will be made to predict the state of deteriorated wires by a forest fire using those two data, and data necessary to diagnose the life state of an ACSR wire affected by a forest fire will be given.

• 설비공학논문집
• /
• 제8권1호
• /
• pp.99-109
• /
• 1996

Experimental investigations are carried out for the characteristics of bubble rise in the Miniature Two-Phase closed Thermosyphon(MTPCT) with a thin wire insert. The working fluids applied as experimental media are of three kinds: water, methanol, and ethanol. The effects of combination of the inclination with diametric ratio $\alpha$(=d$_{0}$/D$_{I}$) on rising velocity of a large bubble in the thermosyphon are explicitly analyzed. The realm of a movable bubble and the critical value of $\alpha$ are iteratively pursued to interpret the region Figures-of-Break, rooted in the governing physics relations, according to the application of working fluid. Experimental results are compared with those of analysis and critical ranges for $\alpha$ and D$_{I}$ were ascertained from comparisons.isons.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 1998년도 창립기념 춘계학술대회 논문집
• /
• pp.525-532
• /
• 1998

In this study, dynamic characteristics of catenary that supplies electrical power to high-speed trains is investigated. A particular emphasis is placed on the effect of droppers on the dynamic response of the contact wire, a dropper is an element that connects the contact wire with the messenger wire so as to maintain near uniform compliance, Finite element model compressing 3 spans is constructed. For the linear model, droppers are modeled as linear springs with various stiffness values. Modal analysis is performed to obtain the natural frequencies and modes and the variation in the modal density distribution for changing stiffness values are noted. Impulse response is also obtained through computer simulation. In practice, dropper is a nonlinear element with low stiffness in compression and high stiffness in tension. Hence, dropper can be modeled as a nonlinear spring with hi-directional stiffness values. Impulse and harmonic responses are obtained for the nonlinear model through simulation. The responses aye also compared with the linear cases.

• 한국공작기계학회:학술대회논문집
• /
• 한국공작기계학회 2002년도 추계학술대회 논문집
• /
• pp.123-128
• /
• 2002

The machining parameters for the wire electrical discharge machining(WEDM), including no load voltage, pulse-on time, pulse-off time, wire tension, water flow rata offset etc. should be chosen properly so that a better performance can be obtained An optimum selection of machining parameters relies heavily on the operators technologies and experience. This study presents a method by means of Taguchi method to select optimal machining parameter combination for an cutting speed or surface roughness. Experimental results demonstrate that the machining models are appropriate and the derived machining parameters satisfy the real requirements in notice.

• 한국농촌건축학회논문집
• /
• 제18권3호
• /
• pp.35-42
• /
• 2016

For the reason of economy, farmers and structural engineers prefer the vinyl house frame members that have the lightest cross sections. Therefore, in order to reach this aim, rod bracing system is the best method for multiple vinyl house frames. In this study, wire rods (tension members) are used to be bracing members in multiple vinyl house frames. The effects of additional wire rods in the frames are investigated by the variations of the bending moments, axial forces, displacements and combined stresses in the main frames that are reinforced by different shapes of rod bracing system. Vinyl house frames are usually made by steel pipe members and collapsed by the excessive wind and snow loads. Two kinds of bracing models are used for wind and snow loads separately in this study. The effective bracing models for each load are finally figured out.

• 항공우주시스템공학회지
• /
• 제15권4호
• /
• pp.1-6
• /
• 2021

The non-explosive holding and release mechanism is used to prevent damage to the mission component caused by explosives when the deployment structure for Cube Satellites is separated. However, among the several types available, the non-explosive holding and release mechanism system using nylon wires depend on the nylon wire knot method and tightening power of the worker. Therefore, in this study, we conducted experiments with the operation of a new holding and release mechanism system by conceptualizing the Boa System Dial, which can provide a constant tightening force regardless of worker proficiency and deploying a imitational solar panel. In this study, the process of binding and unbinding with constant tension was recorded while applying the novel non-explosive holding and release mechanism using the Boa System Dial proposed. In addition, required advances are indicated for the application of the proposed system to actual Cube Satellites.

• Structural Engineering and Mechanics
• /
• 제18권5호
• /
• pp.565-589
• /
• 2004

The present paper concerns the macroscopic overall description of rheologic properties for steel wire and synthetic fibre cables under variable loading actions according to non-linear creep and/or relaxation theory. The general constitutive equations of non-linear creep and/or relaxation of tension elements - cables under one-step and the variable stress or strain inputs using the product and two types of additive approximations of the kernel functions are presented in the paper. The derived non-linear constitutive equations describe a non-linear rheologic behaviour of the cables for a variable stress or strain history using the kernel functions determined only by one-step - constant creep or relaxation tests. The developed constitutive equations enable to simulate and to predict in a general way non-linear rheologic behaviour of the cables under an arbitrary loading or straining history. The derived constitutive equations can be used for the various tension structural elements with the non-linear rheologic properties under uniaxial variable stressing or straining.

• 한국해양공학회지
• /
• 제30권2호
• /
• pp.75-83
• /
• 2016

An experimental study on a subsea installation using an offshore crane was conducted. Concrete blocks, suction piles, and manifolds were considered in this study. Free decay tests were conducted to investigate the fluid characteristics of the subsea structures. The added masses of the structures were estimated. The motion response amplitudes of the subsea structures were compared for different structures and water depths. In addition, the dynamic tension transfer function of the crane wire was investigated. The root mean square values of the heave motion and the dynamic amplification factor of the wire tension were investigated in irregular waves.

• 대한기계학회논문집A
• /
• 제39권10호
• /
• pp.1069-1077
• /
• 2015

발파를 이용한 터널굴착시, 와이어쏘를 이용하여 심빼기 부분 외곽에 불연속면을 발생시켜 발파진동을 차단함으로써 소음 및 진동을 저감시키고자 하는 방법은 타 방법에 비해 시공이 간편하고 경제적일 것으로 예상된다. 본 논문에서는 터널굴착용 와이어쏘의 절삭 메커니즘을 규명하기 위하여 시간에 따른 절삭 깊이 변화와 절삭 중 암석 내부의 와이어쏘 곡선 형태를 파악할 수 있는 절삭 모델을 구축하고 검증하였다. 구축된 모델을 이용한 시뮬레이션을 통해 터널굴착용 와이어쏘 절삭의 특징을 살펴보고, 와이어쏘 인장력, 와이어쏘 속도, 피드 속도, 천공 깊이 및 천공 직경과 같은 주요 조건들이 절삭 성능에 미치는 영향을 검토하였으며, 이러한 검토 결과를 바탕으로 절삭 성능을 높이기 위한 방안을 제시하였다.

• 한국전산구조공학회논문집
• /
• 제25권2호
• /
• pp.119-127
• /
• 2012

와이어 로프(wire rope)는 여러 가닥의 얇고 긴 철사를 감아서 밧줄과 같이 만든 것으로 굽힘과 비틀림 하중에 비해 축 하중에 더 크게 저항할 수 있는 특징을 가지고 있다. 해상 크레인, 갠트리 크레인, 크롤러 크레인 등과 같이 선박 또는 해양 구조물의 탑재를 위해 사용되는 조선용 탑재 크레인은 이러한 와이어 로프를 이용해 큰 중량의 블록들을 들거나 내리고 있다. 따라서 블록의 안전한 탑재를 위해서는 와이어 로프에 대한 동역학적 특성을 잘 파악해야 한다. 본 연구에서는 블록 탑재 시 크레인의 와이어 로프에 작용하는 장력과 비틀림 모멘트에 대한 계산식을 유도하고, 이를 기반으로 한 조선용 탑재 크레인의 동역학 시뮬레이션을 수행하였다. 그 결과, 개발된 시뮬레이션 방법이 실제 조선소의 안전한 블록 탑재 과정에 충분히 적용할 수 있음을 확인하였다.