• 전기학회논문지
• /
• 제67권5호
• /
• pp.644-650
• /
• 2018

According to a miniaturization and integration of electric device, a little size of fuse satisfying the current carrying capacity as well as an explosive tolerance and current interrupt rating are required. Fe-Ni alloy is applied to decrease an oxidation of fuse elements. A resistance and T.C.R(temperature coefficient of resistance) of a fuse are analyzed by changing a content of Ni And full rated current I-T curve from 1A to 6.3A has been tested. In order to an explosive energy, a straight wire type is selected to reduce a fuse melting time. An interrupt rating test was conducted by changing a content of Ni and the optimal content of Ni is to be 40%.

• 전기학회논문지
• /
• 제63권8호
• /
• pp.1070-1074
• /
• 2014

With the development of the electronics industry and widespread supply of many different electrical appliances, the factors of the electrical fires are also diversified. For this reason, the fuse, safety-critical component, needs accurate and stable operating characteristics for preventing various fire factor, and also needs various operating characteristics. Especially when the all electrical resistance are dropped by internal short of circuit, high current inrushes and makes the fire. In order to prevent this, very fast acting fuses should be applied. However, existing very fast acting characteristics fuse has less wire dimension of element Ag100% metal than that of fast acting fuse, and it is made of plating with low melting point metals, so it satisfy very fast acting but it can't satisfy durability and safety. For this reason, in this study, through the analyzing fusing characteristics of Ag-Cu alloy composition, the new alloy composition, which implement to very fast acting fuse without decrease of fuse elements dimension, is suggested. And this study classify the operating characteristics changes, a resistance change, and the rated current of the fuse in the overall composition change of Ag-Cu alloying. and it can be utilized for designing fuse.

• 한국전기전자재료학회논문지
• /
• 제33권3호
• /
• pp.201-207
• /
• 2020

With the expansion in the use of DC power systems and increased need for system maintenance, the development of measurement devices for maintenance requires high stability. Of the different kinds of DC current measurement devices, the single-shot measurement device causes the input signal of the current measuring unit to initially generate a high inrush current. The high inrush current flows into the signal processor of the meter, shortening the life of the internal fuses and causing failure. Therefore, in this study, the I²t value for increasing the durability of the fuse is designed using the available wire diameter. Operating characteristics for 210~400% over-current of the rated current, which is relatively low over-current, are realized by the plating of low melting tin metal. As a result, a method of designing a fuse element for a DC power supply, which improves the safety of the DC current measurement device by blocking the failure caused by the inrush current, is presented.

• 한국산학기술학회논문지
• /
• 제19권6호
• /
• pp.80-87
• /
• 2018

최근 다양한 신재생 에너지 전력원의 확산과 저전력 고효율화 추구로 인하여 전력산업의 트렌드뿐만 아니라 소모량, 제어 방식과 동작 특성 등도 다변화되고 있다. 하지만 이와 같이 다양화 되고 있는 전력 산업에서 안전을 책임지는 핵심 부품인 퓨즈는 고전적 동작 형태에서 크게 발전하지 못하였고, 이로 인하여 계속해서 화재 및 폭발사고가 발생하고 있다. 이에 본 논문에서는 고전적 퓨즈 제작 방식인 카트리지 퓨즈에서 가용체에 저 융점 금속 도금 및 고 융점 금속 도금이 퓨즈의 동작 특성과 I-T 커브의 이동에 미치는 영향을 확인하고, 퓨즈의 동작 특성을 세분화하는 두께에 따른 도금의 영향을 고찰하여 퓨즈의 다양한 동작 특성을 구현하였다. 이와 함께 저 융점 금속의 도금이 퓨즈의 정격전류 선을 낮은 정격으로 이동시키고 동작 특성을 지연 동작의 특성으로 움직여 이를 활용한 다양한 동작 특성 설계가 가능함을 제시하였다.

• 한국인터넷방송통신학회논문지
• /
• 제15권6호
• /
• pp.251-255
• /
• 2015

본 논문은 IoT 응용분야에서 주변 사물에 대한 보정 값이나 최적 값을 저장하는 퓨즈 제어 회로를 제안하였고, 단일 핀을 사용한 직렬 통신 회로를 구현하였다. 2개 이상의 핀을 사용하는 기존 직렬 방식인 SPI 와 $I^2C$ 방식보다 단일 핀을 사용하여 간단한 하드웨어로 구현함으로써 비교적 전송 데이터가 적은 응용 분야에서 효율적으로 사용이 가능하다. 제안된 통신 프로토콜과 퓨즈 제어 회로는 논리 회로 시뮬레이션과 FPGA를 이용하여 동작을 검증하고, CMOS 공정을 이용하여 칩으로 설계하였다. 저전력과 하드웨어가 간단하고 저속의 데이터 전송용 모바일 IoT 제품에 활용이 예상된다.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2006년도 제37회 하계학술대회 논문집 C
• /
• pp.1527-1528
• /
• 2006

This paper presents short-circuit tests for polymer-housed distribution arrestors depends on standards. The compared standards are IEC 60694(2004) and IEEE C62.11 (2005). Major differences depends on standards are prefaulted(pre-failure) method by means of a fuse wire and test procedure.

• Design & Manufacturing
• /
• 제6권2호
• /
• pp.79-83
• /
• 2012

Inner part is used as an insulator in wire fuses. After injection molding, inner part has been showed flashes, filling defects and deformation. After production, operators have to cut off flashes, one by one. this process leads to continuous low productivity and loss of source materials. This study focuses on identifying the causes for flashes, filling defects, clamping force of injectors, mold adhesion, resin of liquidity and others, and on resolving those issues.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2001년도 춘계학술대회논문집D
• /
• pp.60-65
• /
• 2001

Bomb calorimeter was developed for measuring the calorific value of combustible matter such as wastes. The calorimeter consist of bomb, stirred-water type bucket, thermometer and ignition circuit. Operation and performance of the calorimeter have been tested experimentally. In the present study, calorific values of light oil, lamp oil and bunker C oil is measured using the bomb calorimeter. Mass of the sample is fixed at lg, and oxygen pressure in the bomb is used as an experimental parameter. Sample in the oxygen bomb is burned with electrically heated Ni-Cr wire of 100mm in length, and temperature of water in the bucket become increased by $5^{\circ}C$ during about 30min. Calorific value of the sample is calculated with the temperature difference of water. Combustion tests, such as the record of temperature history and the inspection of remnants, are performed at 4, 6, 8 and 10 atm of the oxygen pressure. From the test results, oxygen pressure in the bomb must be over 10atm for complete combustion.

• 한국연소학회:학술대회논문집
• /
• 한국연소학회 2001년도 제22회 KOSCI SYMPOSIUM 논문집
• /
• pp.23-30
• /
• 2001

Bomb calorimeter was developed for measuring the calorific value of combustible matter such as wastes. The calorimeter consist of bomb, stirred-water type bucket, thermometer and ignition circuit. Operation and performance of the calorimeter have been tested experimentally. In the present study, calorific values of light oil, lamp oil, benzoic acid, ethyl alcohol and methyl alcohol is measured using the bomb calorimeter. Mass of the sample is fixed at 19, and oxygen pressure in the bomb is used as an experimental parameter. Sample in the oxygen bomb is burned with electrically heated Ni-Cr wire of 100mm in length, and temperature of water in the bucket become increased by $2{\sim}5^{\circ}C$ during about 30min. Calorific value of the sample is calculated with the temperature difference of water. Combustion tests, such as the record of temperature history and the inspection of remnants, are performed at 6, 8 and 10 atm of the oxygen pressure. From the test results, oxygen pressure in the bomb must be over 10atm for complete combustion.

• 전기전자학회논문지
• /
• 제26권4호
• /
• pp.537-544
• /
• 2022

본 논문은 최근 전자전, 레이더, 기지국 및 위성통신분야에서 각광받고 있는 GaN HEMT(Gallium Nitride High Electron Mobility Transistor) die를 이용한 고출력증폭기의 제작에 사용되는 본드 와이어의 용융단선 현상과 원인을 분석하였다. 고출력증폭기의 주요 성능인 최대 출력전력을 얻기 위해서는 최적의 임피던스 정합이 필요하고 정격전류뿐만 아니라 과도전류에 대한 발열을 고려하여 본드 와이어 소재에 부합하는 직경과 가닥수가 정해져야 한다. 특히, GaN과 같이 에너지 밴드 갭이 넓은 화합물반도체는 설계효율이 낮거나 방열이 부족하면 열 저항 증가로 인해 본드 와이어의 용융단선을 촉발하는 현상을 확인하였다. 본 자료는 발열조건에 대한 모의시험을 수행하고, IR현미경 측정을 통한 검증으로 GaN소자를 이용한 응용분야에 참고자료로 활용이 기대된다.