• 한국환경보건학회지
• /
• 제21권4호
• /
• pp.56-62
• /
• 1995

Recently, the traffic noise around residences and schools has become a serious social problem with the increase of the amount of transportation. This study was performed to investigate the sound proof efficiency of windows for traffic noise. The results were as follows 1) The traffic noise in 19 sites among 22 sampling sites was higher value than 65 dB(A) being roadside environment standard level in the daytime when all windows were opened, while the noise in 22 sampling sites was transmitted below standard level when all windows were closed. 2) The transmission loss of sound level at single window and double windows were 10~25 dB(A) and 11~29 dB(A) respectively. 3) The transmission loss of sound level at sampled school with sound proof pannel was 7~8 dB (A), which was lower 2~7 dB(A) than the theoretical value of the influence assessment . 4) The construction cost of double windows was lower 28% even if include the cost of setting up air conditioner for the summer season and the power consuming cost for its operation than that of sound proof pannel for traffic noise. 5) The effect of transmission loss of windows was more influenced by airtight than materials of windows.

• 한국추진공학회:학술대회논문집
• /
• 한국추진공학회 2003년도 제20회 춘계학술대회 논문집
• /
• pp.59-63
• /
• 2003

액체 램제트의 연소 현상을 연구하기 위한 소형 직접 연결식 시험 장치에 대한 개념 설계 방법을 기술하였다. 본 시험 장치를 이용하여 수 차례의 시험 결과 시험장치가 정상적으로 작동됨을 확인하였다. 측정된 연소실 압력 데이터에서 약190Hz대의 특정 주파수가 계측되었으며, 이는 연소실의 1L 음향 주파수(1200Hz)와는 차이가 큰 것이다. 불안정 모드를 야기하는 원인으로 dump combustor에서 발생되는 흡입 공기의 vortex street, 쵸크 되지 않은 긴 흡입관에서 발생되는 흡입구의 resonance, 관측창으로 인해 변형된 연소실 형상 등이 그 원인으로 판단된다.

• 대한전자공학회논문지SD
• /
• 제37권7호
• /
• pp.43-49
• /
• 2000

본 논문에서는 DDR(Double Data Rate) Synchronous DRAM에서 안전한 데이터 영역(tDV) 확보를 위한 DDL(Delay Locked Loop) 회로인 ADD(Alternate Directional Delay)회로 방식을 제안하였다. 본 방식은 디지털 DLL의 단점인 부가회로 면적(area-overhead)을 절감할 수 있는 방식으로ㅆ, 하나의 지연회로 체인(chain)을 이용하여 동시에 양방향으로 클럭을 발생할 수 있도록 함으로써 기존의 SMD(Synchronous Mirror Delay)방식에 비해 약 2배의 부가회로 면적을 감소할 수 있도록 설계하였다. 또한 설계한 ADD방식이 지터(jitter)는 50ps-140ps이고, 동ㅈ가 주파수 영역은 166MHz-66MHz이다.(205V, TYP, 동작조건)

• 전기학회논문지
• /
• 제58권12호
• /
• pp.2322-2327
• /
• 2009

Uncertainty of power system operation increases due to complexity and facilities diversification in the power system. Therefore the importance of SCADA(Supervisory Control and Data Acquisition) system which obtain and manage the actual data in real-time is very important. Accordingly in the studies of power system analysis, the efforts to include real-time power system analysis in simulation and applications are made in many ways. The real-time communication characteristics of SCADA system is considered so as to develop the power system analysis program that matches actual system conditions. The observation and management of SCADA system is realized by Intouch which is mainly used for factory automation and PSS/E(Power System Simulator for Engineers) provides real time system data. SQL DB and Python language is used for real-time communication between the softwares. It is very comfortable to use the various functions in Intouch WindowMaker.

• 통상정보연구
• /
• 제10권1호
• /
• pp.97-115
• /
• 2008

This paper is to review how Korean trading companies perform and promote the digital transformation through the e-networking with global market, and how much they extend the volume of export, and make the company grow inward or outward in order to enhance the effects of economic growth in Korea. It is suggested that global agreement on e-Trade(or u-Trade) should be made in order to expand the global e-networking practices and to ensure transferring of transport documents(or business documents). Moreover, it also suggested that networking on the global trading partners such as government authorities, diplomatic offices abroad, overseas Koreans, students studying abroad, Korean merchants abroad, etc. should be made in single window for improving and upgrading the image of Korean trading companies. By making of global e-network platform between overseas business partners, trading companies are able to expect various synergy effects such as improving the satisfaction of their customers, promoting the global transactions, reducing the operation and transaction cost, helping fording overseas buyers, and extending export volume and sales profit, etc. Customers can also obtain the information about trading goods easily and rapidly, and cut down the transaction stage using information exchange with partners. All of the trading partners in the world can maintain their business partnership as long as they use the global e-network.

• 한국항해항만학회:학술대회논문집
• /
• 한국항해항만학회 2002년도 추계공동학술대회논문집
• /
• pp.1-6
• /
• 2002

수색구조 작업에서 표류지점 추정 모델을 윈도우 운영체계에서 쉽게 운영할 수 있는 GUI 프로그램을 개발하였다. 운영자가 화면의 선택사항을 보고 표류물체의 종류와 해상환경조건을 입력시킬 수 있도록 하였고, 계산된 추정점 및 선박의 표류 궤적이 좌표와 함께 해도상에 표시되게 하여 현장에서 쉽게 예측결과를 알 수 있도록 하였다. 프로그램에는 Leeway 공식을 사용하는 방식과 Newton의 운동방정식에서 해를 구하는 방식을 사용하였다. 프로그래밍에 사용된 언어는 FORTRAN이고, 그래픽 처리를 위해 Lahey의 Winteracter 4.0을 활용하였다. 모델의 시현을 위해 2001년 5원 부산 근해에서 수행된 현장실험 결과와 예측 모델에 의한 결과를 비교·도시하였다.

• 한국통신학회:학술대회논문집
• /
• 한국통신학회 1991년도 추계종합학술발표회논문집
• /
• pp.92-95
• /
• 1991

Constant false alarm rate(CFAR) processors are useful for detecting radar targets in background for which all parameters in the statistical distribution are not known and may be nonstationary. The well known "cell averging" (CA) CFAR processor is known to yield best performance in homogeneous case, but exhibits severe performance in the presence of an interfering target in the reference window or/and in the region of clutter edges. The "order statistics"(OS) CFAR processor is known to have a good performance above two nonhomogeneous cases. The modified OS-CFAR processor, known as "trimmed mean"(TM) CFAR processor performs somewhat better than the OS-CFAR processor by judiciously trimming the ordered samples. This paper proposes and analyzes the performance of a new CFAR processor called the "maximum trimmed mean"(MX-TM) CFAR processor combining the "greatest of"(GO) CFAR and TM-CFAR processors. The MAX operation is included to control false alarms at clutter edges. Our analyses show that the proposed CFAR processor has similar performance TM- and OS-CFAR processors in homogeneous case and in the precence of interfering targets, but can control the false rate in clutter edges. Simulation results are presented to demonstrate the qualitative effects of various CFAR processors in nonhomogeneous clutter environments.

• Journal of Chest Surgery
• /
• 제22권6호
• /
• pp.944-950
• /
• 1989

Children with congenital cardiac defects associated with high pulmonary artery pressure may die despite accurate surgery. Postoperative mortality and morbidity have been attributed to acute rises in pulmonary artery pressure and resistance. Acute pulmonary hypertensive crisis is defined as a paroxysmal event in which pulmonary arterial systolic pressure rises to or above systemic levels followed by a rapid fall in systemic pressure and a minor pulmonary hypertensive event is defined as an acute rise in pulmonary arterial pressure to more than 80 % of systemic levels but without a fall in systemic pressure. From Oct. 1988 to Jul. 1989, we experienced 23 patients who showed many pulmonary hypertensive crises after operation in the Department of Thoracic and Cardiovascular Surgery, Seoul National University Children\ulcorner Hospital. Their preoperative PAP/SAPs were 53 to 123 %[mean 93.3%] and diagnoses were VSD[7], TAPVR[5], TGA[4], AVSD[3], MS[1], DORV[1], Truncus arteriosus[1], and AP window[l]. There were 9 deaths among 23 patients and they showed many pulmonary hypertensive crisis episodes during postoperative intensive care, which was managed by sedation, hyperventilation, oxygen, and acidosis correction and which decreased after using tolazoline. In view of our experience, we recommend that pulmonary artery pressure should be monitored in congenital heart defected patient with preoperative pulmonary hypertension to confirm and to manage the pulmonary hypertensive crisis accurately and using tolazoline is helpful in the treatment of pulmonary hypertensive crisis.

• 대한디지털의료영상학회논문지
• /
• 제5권1호
• /
• pp.78-84
• /
• 2002

To evaluate the relative time required to perform a CT(computed tomography) examination in a filmless versus a film-based system and helical versus nonhelical studies. Time and Motion studies were performed in 175 consecutive CT examinations. Images from 85 examinations were electronically transferred to a PACS, and 90 were printed to film. The time required to obtain and electronically transfer the images or print the images to film and make the current and previous studies available to the radiologists for interpretation was recorded. The time required for a radiological technologist to complete a CT examination was reduced by 43% with the PACS compared with the film-based system and nonhelical was reduced 10-20% with helical studies. This reduction was due to the elimination of a transfer and printing, such as the printing at window or level settings. The use of PACS can result in the elimination of time tasks for the radiological technologist, resulting in marked reduction in examination time. This reduction can result in decreased cost and increased productivity in PACS operation.

• 한국인쇄학회지
• /
• 제24권2호
• /
• pp.49-59
• /
• 2006

In this paper, a transparent film exposed the effect of heat cut-off, reveal as means of the prevention to wrong operation of parts of display and forgery of the credit card, also it will intercept rising of the temperature in interior of a room and car by diminish the influx of near-infrared ray wavelength of solar energy come from the window. As in the past a film which absorb a wavelength of $800{\sim}2500nm$ in near-infrared ray, manufactured in physical vapor deposition(PVD), chemical vapor deposition(CVD) to using ATO, ITO of inorganic materials or sputtering method. but it has lots of problem in manufacture. On the other hand, recently a paper said it easily form a transparent film to using organic dye. This paper show synthesis of many derivatives used in Ni-complex and then it investigate to optical property and durability of flim by make the transparent film.