• 한국복합재료학회:학술대회논문집
• /
• 한국복합재료학회 2004년도 추계학술발표대회 논문집
• /
• pp.241-245
• /
• 2004

Among the various manufacturing processes of composites, the tape lay-up process of thermoset prepreg has many advantages compared to autoclave or hot press forming. It has a high potential to process automation and continuous fabrication .. Fiber placement developed as a logical combination of filament winding and automated tape placement to overcome some of the limitations of each manufacturing method. Fiber placement uses a compaction device to apply direct contact between the incoming materials in the fiber placement head and Heat is added to the materials at the nip point of the compaction roller. This paper will discuss property of thermoset composite as compaction and heat effect in Automated fiber placement

• Composites Research
• /
• 제24권5호
• /
• pp.23-28
• /
• 2011

본 논문에서는 필라멘트 와인딩 시 장력에 의해 복합재료에 발생한 압력 정보를 이용하여 동시경화법으로 제조된 T800 탄소섬유/에폭시 복합재료-알루미늄 단면겹치기 접착조인트의 접착강도를 부가압력의 크기에 따라 측정하였다. 실험시편은 오토클레이브 진공백 성형을 통해 성형압력 (절대압력 0.1MPa, 0.3MPa, 0.7MPa)을 조절하여 제작하였다. 접착강도를 측정하기 위하여 인장실험이 실시되었으며, 필라멘트 와인딩 공정에 의해 제조된 Type III 수소저장용가의 복합재료-알루미늄 라이너의 계면 접착강도를 측정하기 위해 단면겹치기 접착조인트의 접착부에 일정한 압력을 가해줄 수 있는 압력부가 장치를 설계하였다. 적층된 복합재료에 가해지는 부가압력이 접착강도에 미치는 영향을 확인하기 위해 서로 다른 세 종류의 부가압력 (절대압력 0.1MPa, 0.3MPa, 0.7MPa)을 시편에 부가하여 접착강도를 측정하고, 그 결과를 비교하였다.

• 한국산학기술학회논문지
• /
• 제8권6호
• /
• pp.1381-1387
• /
• 2007

현재까지 다양한 연속적인 공정시스템은 섬유, 제지 및 인쇄 등 많은 산업응용 분야에서 사용되고 있다. 이러한 응용분야에서 공정처리를 받고 있는 제품에 가해지는 장력은 원료의 공급속도와 생산되는 제품의 방출 속도간의 속도차에 의해 변화될 수 있다 특히, 섬유공정에서 공급속도와 방출 속도간의 속도차나 관성효과에 의해 발생되는 장력변동은 제품의 품질을 저하시킬 수 있다. 따라서 섬유공정에서 이러한 요인들에 의해 발생되는 장력 변동을 적절한 방법에 의해 보상하는 것은 매우 중요한 문제이다. 본 논문에서는 이러한 문제를 해결하기 위하여 섬유공정에서 많이 사용되고 있는 환편기 시스템에서의 장력제어 문제를 다루고자 한다. 먼저 일반적인 연속공정의 권취 메커니즘에 대한 장력 관계식을 모델링한다. 다음은 환편기 시스템에서 풀림롤과 감김롤을 효율적으로 구동하기 위하여 풀림롤과 감김롤간의 속도차와 관성특성을 고려한 새로운 장력제어 방법을 제시한다. 다양한 실험을 통하여 제안된 장력제어 방법이 주어진 환편기 시스템의 공정구간에서의 장력제어 성능을 향상시킬 수 있음을 보인다.

• 전기학회논문지
• /
• 제66권2호
• /
• pp.328-338
• /
• 2017

In this paper, a zero torque control scheme adopting current sharing function (CSF) used in integrated Switched Reluctance Motor (SRM) drive with DC battery charger is proposed. The proposed control scheme is able to achieve the keeping position (KP), zero torque (ZT) and power factor correction (PFC) at the same time with a simple novel current sharing function algorithm. The proposed CSF makes the proper reference for each phase windings of SRM to satisfy the total charging current of the battery with zero torque output to hold still position with power factor correction, and the copper loss minimization during of battery charging is also achieved during this process. Based on these, CSFs can be used without any recalculation of the optimal current at every sampling time. In this proposed integrated battery charger system, the cost effective, volume and weight reduction and power enlargement is realized by function multiplexing of the motor winding and asymmetric SR converter. By using the phase winding as large inductors for charging process, and taking the asymmetric SR converter as an interleaved converter with boost mode operation, the EV can be charged effectively and successfully with minimum integral system. In this integral system, there is a position sliding mode controller used to overcome any uncertainty such as mutual inductance or DC offset current sensor. Power factor correction and voltage adaption are obtained with three-phase buck type converter (or current source rectifier) that is cascaded with conventional SRM, one for wide input and output voltage range. The practicability is validated by the simulation and experimental results by using a laboratory 3-hp SRM setup based on TI TMS320F28335 platform.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1996년도 하계학술대회 논문집 A
• /
• pp.196-198
• /
• 1996

The manufacturing process of the amorphous transformer core consists of winding, cutting, forming, annealing. Clamping of cores during this process are required for shape forming. Clamping of cores enhances the space factor, but degrades the magnetic properties and core loss characteristics of the cores. In this study, we investigated the optimal clamping pressure required in magnetic field annealing of 5 kVA amorphous transformer core.

• 한국초전도ㆍ저온공학회논문지
• /
• 제6권1호
• /
• pp.1-5
• /
• 2004

Long length of Bi-2223/Ag superconducting wives were fabricated by stacking and drawing process with advanced heat-treatment schedules. Intermediate annealing was carried out to increase the homogeneity and uniformity of the superconducting filaments embedded in the silver matrix. Phase modification from tetragonal to orthorhombic Bi-2212 by pre heat treatment(PHT) was executed to improve the texture and phase transformation of Bi-2223. Drawing stress was measured to predict the sausaging and stress limit. Rolling Parameters such as thickness. width and winding tension were investigated to roll the tape with uniformity. 1 km length of Bi-2223/Ag superconducting wires were fabricated without any breakage. Critical current (Je) of 270 m length of superconducting tapes was measured over than $70 A/cm^2$ continuously after final sintering.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2004년도 춘계학술대회논문집
• /
• pp.362-365
• /
• 2004

'Coil' occupies a much important position in delivering driving force of optical pick-up actuators. Up to now the main stream has been a winding coil type actuator, but actuators using FP-Coil(Fine Pattern Coil) have been considered for the more compacted and simple manufacturing process and have variously spreaded the application fields by product. We have tried to design actuators using PCB-Coil(Printed Circuit Board Coil) which has benefits in terms of price and manufacturing process. Especially this research has two main things those are to reduce the vibration of sub-resonance and to assure the do sensitivity in the performance of asymmetric optical pick-up actuator with PCB-Coil.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 1994년도 추계학술대회 논문집
• /
• pp.584-589
• /
• 1994

A time-varying nonlinear mathematical model was derived to consider the effect of change in roll radius on tension varation during winding and unwinding. A variable-gain PID controller was designed for tension control at start and stop in a multi-span continuous process system. The controller gains are updated at every control loop as roll radii continuously change. Computer simulation was carried out by using the mathematical model and the controller developed for a typical operating condition including acceleration and deceleration. When the variable-gain PID controller was used, the tension control performance was improved compared with that of existing control method during start-up and stop.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1998년도 하계학술대회 논문집 A
• /
• pp.88-90
• /
• 1998

The conceptual design of turbine-driven air-cooled 100 MW generator is presented. The generators rating is 100 MW 3-phase 2pole 13.8 kV 0.85 pf 60 Hz. The conceptual design is described by the process of designing the stator, rotor, and obtaining some of equivalent circuit parameters. The design process starts from the output coefficient G, and utilizes the classical design equations with parameters used in the modern designs. The slot dimensions of the stator and rotor are obtained with their respective winding dimensions.

• 한국정밀공학회지
• /
• 제27권3호
• /
• pp.95-103
• /
• 2010

Roll to Roll (R2R) is one of the most promising production technologies in the printed electronics such as OLEDs, e-paper, backplanes, RFID because this technology can save production cost and increase production speed. Printed electronics includes various processes such as printing, drying, winding, unwinding, and so on. In printed electronics R2R system, air-flotation oven is employed for drying process. Therefore, it is essential to introduce efficient and fast drying process when printing is finished. This paper considers the analysis of drying process in R2R that involves hot air flow. Air-flotation oven consists of non-contact supports and drying of coated web materials such as plastic films and paper. In this paper, experimental results and numerical analysis of pressure-pad air bar are investigated. The aerodynamic characteristics of pressure-pad air bar are numerically calculated using computational fluid dynamics (CFD) approach. Then the measured values of the aerodynamic forces for air bars are compared with those of CFD analysis.