• 제목/요약/키워드: wind tunnel tests

검색결과 440건 처리시간 0.027초

측추력 제어 유도탄의 공력모델링시 CFD의 적용 (Use of CFD for Aerodynamic Interference Modelling of Jet-Controlled Missile)

  • 성웅제;홍승규;안창수
    • 한국전산유체공학회:학술대회논문집
    • /
    • 한국전산유체공학회 2003년도 추계 학술대회논문집
    • /
    • pp.120-125
    • /
    • 2003
  • Recently, lateral jet has been adopted as an effective control device for high maneuverable tactical missiles in supersonic regime. Aerodynamic interference caused by the lateral jet can be categorized into two phenomena : local interaction redistributing surface pressure near the jet exit region and downstream interaction affecting tail control effectiveness. As part of on-going research, this paper deals with the aerodynamic modeling to predict the variation of force and moment when lateral jet of is activated on the missile body. For this purpose, a series of numerical simulation has been performed and the results are presented. Using the information obtained by CFD, aerodynamic model of preliminary level has been constructed and is reviewed. Some relevant comparison with wind tunnel tests are presented.

  • PDF

Study on the Fundamental Technologies of ATREX Engine

  • Sato, Tetsuya;Kobayashi, Hiroaki;Tanatsugu, Nobuhiro
    • 한국추진공학회:학술대회논문집
    • /
    • 한국추진공학회 2004년도 제22회 춘계학술대회논문집
    • /
    • pp.665-670
    • /
    • 2004
  • This paper reviews the latest studies of the expander cycle Air Turbo Ramjet engine (ATREX) conducted in JAXA. First, a system analysis including the vehicle and trajectory was conducted to optimize the engine cycle and turbo-machine configuration. We selected the precooled turbo-jet cycle for a prototype engine using the near term technologies. Second, a system ground-firing test was conducted to verify a defrosting system for the precooler. Methanol injection with its particles atomization could compensate 80 % of pressure loss caused by the frost. Thirdly, a feasibility of carbon/carbon composites for the engine components was investigated by making complex shapes such as a heat exchanger and a plug nozzle. Basic technologies on the gas leakage, the junction and bonding were also studied. The end of the paper, some basic studies such as wind tunnel tests of a new type air inlet and a plug nozzle are described.

  • PDF

CFD/CSD 정밀 연계해석기법을 이용한 3차원 곡면날개의 가상 플러터 시험 (Virtual Flutter Test of Spanwise Curved Wings Using CFD/CSD Coupled Dynamic Method)

  • 김동현;오세원;김현정
    • 한국소음진동공학회:학술대회논문집
    • /
    • 한국소음진동공학회 2005년도 추계학술대회논문집
    • /
    • pp.457-464
    • /
    • 2005
  • The coupled time-integration method with a staggered algorithm based on computational structural dynamics (CSD), finite element method (FEM) and computational fluid dynamics (CFD) has been developed in order to demonstrate physical vibration phenomena due to dynamic aeroelastic excitations. Virtual flutter tests for the spanwise curved wing model have been effectively conducted using the present advanced computational methods with high speed parallel processing technique. In addition, the present system can simultaneously give a recorded data fie to generate virtual animation for the flutter safety test. The results for virtual flutter test are compared with the experimental data of wind tunnel test. It is shown from the results that the effect of spanwise curvature have a tendency to decrease the flutter dynamic pressure for the same flight condition.

  • PDF

정온식 열감지기의 응답시간지수 및 작동시간 (Response Time Index and Operation Time of Fixed Temperature Heat Detector)

  • 류호철;태순호;이병곤
    • 한국화재소방학회논문지
    • /
    • 제7권1호
    • /
    • pp.11-16
    • /
    • 1993
  • Fixed temperature heat detectors that respond to the heat generated in fire plume and alarm when the temperature reaches a specified point, give a great influences to the loss of life and property according to their reaction sensitivity. In this study, hot wind tunnel tests and compartment fire experiments were performed to investigate the response time and temperature of fixed temperature heat detector. As a result, simple equations were derived which can be predicted the response time and temperature of the fixed temperature heat detector for the ramp type fire. Also other useful data, such as the effective temperature, time constant, response time index(RTI) were obtained.

  • PDF

2차원 풍동실험을 통한 평행 경사 실린더의 웨이크 갤로핑 평가 (Evaluation of Wake Galloping for Inclined Parallel Cables by Two-Dimensional Wind Testes Tests)

  • 김선중;김호경;이상훈
    • 한국강구조학회 논문집
    • /
    • 제23권6호
    • /
    • pp.763-775
    • /
    • 2011
  • 경사진 평행 병렬 사장재 케이블의 웨이크 갤로핑 발현 특성을 2차원 부분모형을 통하여 규명하였다. 경사진 병렬 사장재를 모사하기 위하여 두 실린더를 나란히 경사배치 하였으며 중심간격 변화에 따른 풍상측 및 풍하측 실린더의 진동을 관찰하였다. 실린더 지름의 여섯 배까지 케이블강교량설계지침의 허용값을 초과하는 진동이 관할되었다. 이는 설계 시 관용적으로 사용되는 검토기준이 비교적 적정함을 의미하는 것이다. 반면, 감쇠의 증가는 웨이크 갤로핑의 발현을 억재하는 데 효과적이지 않음을 확인할 수 있었다.

횡류식 제·배연 시스템의 개선 및 적용성 분석을 위한 모형실험 연구 (Scaled model tests for improvement and applicability of the transverse smoke control system on tunnels)

  • 김효규;백두산;김재현;이성원;유지오
    • 한국터널지하공간학회 논문집
    • /
    • 제22권5호
    • /
    • pp.563-574
    • /
    • 2020
  • 현재 도로터널과 철도터널에서는 화재시 발생한 유독가스 및 연기를 배출하기 위하여 제·배연시스템을 구축하고 있다. 다양한 제·배연 시스템 중 횡류식 제·배연시스템은 풍도의 중간을 구획하여 급기 또는 배기를 수행함에 따라 터널 본선 전단면에 급기 또는 배기가 되는 것이 아니라 터널 본선의 절반 부분만 급기 또는 배기가 수행되는 단점을 지니고 있다. 따라서 본 연구에서는 횡류식 제·배연시스템의 한계점을 개선한 조닝방식에 대하여 수치해석과 모형시험을 통해 제·배연 효과를 분석하였다. 모형시험의 결과 제·배연이 이루어지지 않은 상태를 기준으로 횡류식 제·배연시스템은 25.6%의 배연율을 나타내었고, 조닝을 통한 제·배연시스템은 40.8%의 배연율을 나타내었다. 또한 수치해석결과 횡류식 제·배연시스템은 본선터널에서 확산되는 화재연기를 차단하지 못하고 지속적으로 확산 되는 양상을 보이는 것으로 나타났다. 한편, 조닝방법을 통한 제·배연시스템은 에어커튼 효과 및 배연 효과로 인하여 화재연기가 일정구간 내에 제연 되는 것으로 나타났다.

스카이브릿지로 연결된 고층건물의 진동제어 성능평가 (Performance Evaluation of Vibration Control of High-rise Buildings Connected by Sky-Bridge)

  • 김현수;양아람;이동근;안상경;오정근
    • 한국공간구조학회논문집
    • /
    • 제8권4호
    • /
    • pp.91-100
    • /
    • 2008
  • 본 연구에서는 sky-bridge로 연결된 고층건물의 진동제어성능을 검토하여 보았다. Sky-bridge를 이용한 진동제어의 원리는 서로 다른 동적특성을 가진 구조물이 sky-bridge를 통하여 제어력을 발휘함으로써 전체 시스템의 응답을 줄이는 것이다. 본 연구에서는 실제 건설 중인 sky-bridge로 연결된 고층건물(49층 및 42층)을 대상으로 구조물의 변위, 가속도 및 베어링반력, sky-bridge의 응력 등을 해석적인 방법으로 검토하였다. 이를 위하여 역사지진, 인공지진 및 풍동실험을 통해서 얻은 풍하중 시간이력을 사용하였다. 해석결과 sky-bridge를 사용하여 고층건물의 풍응답 및 지진응답을 효과적으로 줄일 수 있는 것을 확인하였다.

  • PDF

착빙 해석의 표면 거칠기 모델 개선을 위한 착빙 풍동시험 연구 (Icing Wind Tunnel Tests to Improve the Surface Roughness Model for Icing Simulations)

  • 손찬규;민승인;김태성;김선태;이관중
    • 한국항공우주학회지
    • /
    • 제46권8호
    • /
    • pp.611-620
    • /
    • 2018
  • 수치해석을 이용한 항공기 착빙 형상 예측의 정확도 향상을 위하여 거칠기 분포 예측이 가능한 해석적 모델이 개발되고 있다. 그러나 표면의 상태에 대한 정량적인 실험 결과가 거의 없어 해석적 모델을 검증하고, 경험적인 변수를 결정하는데 어려움을 겪고 있다. 이에 본 연구에서는 표면의 상태를 미시적 관점에서 분석하기 위한 실험적 연구를 수행하였다. 우선, 착빙 환경 변수인 온도와 자유류 속도에 따른 매끈한 표면의 넓이의 관계를 정량적으로 파악하였다. 그 결과 대기 온도가 높고 자유류 속도가 증가할수록 매끈한 표면의 넓이가 증가하였다. 그 다음으로 서리 얼음 표면과 유리얼음 표면의 특성을 분석하였다. 서리얼음 조건에서는 불투명한 원뿔 형태의 얼음 요소들이 유동 반대 방향으로 성장하고, 대기 온도가 증가함에 따라 원뿔 얼음 요소들의 길이와 간격이 감소하는 것을 확인하였다. 유리얼음 조건에서는 반투명한 얼음 덩어리를 날개 아랫면에서 관찰할 수 있었다. 이러한 원인은 중력의 영향이 큰 아랫면에서 주로 리블렛이 형성되고, 이와 같이 형성된 리블렛이 집중하여 얼어붙었기 때문이다.

지상 및 비행 시험을 통한 플랩의 힌지 모멘트 추정 (Flap Hinge Moment Estimation through Ground and Flight Tests)

  • 고명균
    • 한국항공우주학회지
    • /
    • 제46권6호
    • /
    • pp.464-470
    • /
    • 2018
  • 본 논문에서는 항공기 플랩 운용조건에 따라 변하는 플랩의 힌지 모멘트를 추정하는 실제적인 방법을 소개하였다. 플랩의 설계를 위하여 구조 하중해석과 풍동시험으로 산출한 힌지 모멘트를 실제 비행 힌지 모멘트와 비교할 수 있었으며, 플랩 구조의 정적 안전성을 확인할 수 있었다. 이를 위해서 두 개의 변형률게이지를 플랩 힌지에 장착하였으며, 항공기 하중 모니터링 탑재장비를 사용하였다. 지상 시험을 통해서 힌지의 변형률과 모멘트의 상관관계를 해석해와 유한요소해석으로 교정하였다. 비행 시험에서는 플랩 처짐 각도 및 속도와 함께 변형률 신호를 기록하였다. 최종적으로, 계측한 변형률을 해석해와 유한요소해석으로 교정함으로서 비행 힌지 모멘트를 추정할 수 있었다.

Effects of types of bridge decks on competitive relationships between aerostatic and flutter stability for a super long cable-stayed bridge

  • Hu, Chuanxin;Zhou, Zhiyong;Jiang, Baosong
    • Wind and Structures
    • /
    • 제28권4호
    • /
    • pp.255-270
    • /
    • 2019
  • Aerodynamic configurations of bridge decks have significant effects on the aerostatic torsional divergence and flutter forsuper long-span bridges, which are onset for selection of suitable bridge decksfor those bridges. Based on a cable-stayed bridge with double main spans of 1500 m, considering typical twin-box, stiffening truss and closed-box section, which are the most commonly used form of bridge decks and assumed that the rigidity of those section is completely equivalent, are utilized to investigate the effects of aerodynamic configurations of bridge decks on aerodynamic instability performance comprised of the aerostatic torsional divergence and flutter, by means of wind tunnel tests and numerical calculations, including three-dimensional (3D) multimode flutter analysis and nonlinear aerostatic analysis. Regarding the aerostatic torsional divergence, the results obtained in this study show twin-box section is the best, closed-box section the second-best, and the stiffening truss section the worst. Regarding the flutter, the flutter stability of the twin-box section is far better than that of the stiffening truss and closed-box section. Furthermore, wind-resistance design depends on the torsional divergence for the twin-box and stiffening truss section. However, there are obvious competitive relationships between the aerostatic torsional divergence and flutter for the closed-box section. Flutter occur before aerostatic instability at initial attack angle of $+3^{\circ}$ and $0^{\circ}$, while the aerostatic torsional divergence occur before flutter at initial attack angle of $-3^{\circ}$. The twin-box section is the best in terms of both aerostatic and flutter stability among those bridge decks. Then mechanisms of aerostatic torsional divergence are revealed by tracking the cable forces synchronous with deformation of the bridge decksin the instability process. It was also found that the onset wind velocities of these bridge decks are very similar at attack angle of $-3^{\circ}$. This indicatesthat a stable triangular structure made up of the cable planes, the tower, and the bridge deck greatly improves the aerostatic stability of the structure, while the aerodynamic effects associated with the aerodynamic configurations of the bridge decks have little effects on the aerostatic stability at initial attack angle of $-3^{\circ}$. In addition, instability patterns of the bridge depend on both the initial attack angles and aerodynamic configurations of the bridge decks. This study is helpful in determining bridge decksfor super long-span bridges in future.