• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2002년도 학술대회지
• /
• pp.253-254
• /
• 2002

The determination of thrust is very important in hypersonic air-breathing propulsion design and evaluation. Because of the short flow-residence time in the combustor, the evaluation of engine performance is strongly influenced upon the engine thrust. Conventional methods to determine the thrust is using thrust stand or force measurement system. However, these methods cannot be applied to the case where thrust stands are impractical, such as free jet testing of engines, and model combustor. With this reason, the thrust determination method from measured pilot pressure is considered and evaluated.

• 한국전산유체공학회:학술대회논문집
• /
• 한국전산유체공학회 2001년도 추계 학술대회논문집
• /
• pp.37-43
• /
• 2001

The methods of atmospheric boundary layer generation in test section were reviewed. To utilize conventional aerodynamic wind tunnels as atmospheric wind tunnels, boundary layer growth should be accelerated. To achieve this, improvement of boundary layer generation devices is required and it might be done by CFD. In this respect, CFD application cases in boundary generation devices were reviewed and potential areas were considered. Some cases are tried by Fluent 5 code.

• 한국군사과학기술학회지
• /
• 제20권3호
• /
• pp.393-404
• /
• 2017

Side jet effect on the aerodynamic characteristics of a missile was investigated using experimental and computational methods. A couple of side jets were injected toward outward downstream at mid point of missile body. Cold air jet was used in the wind tunnel test, and cold and hot jet were used in the computation. Wind tunnel test was carried out with jet and without jet, and calculation was performed for three cases ; no jet, cold air jet, and hot mixture gas jet. From the comparison of measured and calculated data for all cases, two points could be deduced. Firstly, side jet made static stability to be unstable by increasing body normal force near the side jet exit and by decreasing tail normal force. Secondly, hot mixture gas had more significant effect on the static stability of a missile-type body than cold air jet.

• 한국항공우주학회지
• /
• 제31권5호
• /
• pp.93-99
• /
• 2003

극초음속 추진기관의 설계 및 평가에 있어 추력의 측정은 매우 중요하다. 일반적인 추력 측정방법으로는 추력 측정기를 사용하고 있지만 이러한 방법으론 엔진의 자유제트 실험이나 모델 연소기 같은 실험에는 적용이 부적절하다. 이 때문에 피토압력을 이용한 새로운 추력 계산 방법을 고려하였고 검증하였다. 피토 압력을 통해 계산된 추력의 검증은 추력측정기를 통해 측정된 실제 추력값과의 비료를 통해 이루어질 수 있으며 이를 위해 추력측정기 위에 소형 초음속 풍동을 장착하였다. 추력이 측정되는 동안 충동 후방의 피토압력을 동시에 측정하였다. 측정된 피토 압력을 이용하여 구한 추력값을 검증하기 위해서, 추력측정기로 측정한 추력을 완정팽창 노즐이론 및 추력계수를 이용한 이론적인 계산에 의해 구해진 추력값과 비료, 분석하였다.

• 대한조선학회논문집
• /
• 제42권5호
• /
• pp.448-457
• /
• 2005

The experiment was performed at the large wind tunnel of the Chungnam National University to measure the velocity distribution around the stern of a Liquefied Natural Gas Carrier model. The data, mean velocity vectors of turbulent shear flows at the stern and near-wake including the propeller plane, were obtained by a five-hole Pilot tube for the double body model fixed inside the wind tunnel test section. The present result of the double body model shows a close agreement with the result of the lowing tank experiment performed by the KRISO for the same ship model. The characteristics of the LNG stern flow are discussed based on the measured velocity distribution. The data can be very useful for the validation of some numerical methods in computational fluid dynamics.

• 한국군사과학기술학회지
• /
• 제26권2호
• /
• pp.149-158
• /
• 2023

To predict the aerodynamic characteristics of the grid fins from subsonic to supersonic speeds, low fidelity SW as well as CFD SW were applied. VLM(Vortex Lattice Method) and SE(Shock-Expansion) method were used at subsonic and supersonic speed domain respectively for the rapid prediction of low fidelity SW. For 2 configurations of the grid fins, the CFD computations and tests using the trisonic wind tunnel were also performed to compare the results of the grid fins. The results of low fidelity SW, CFD SW and the wind tunnel tests data were agreed well each other. Through further research on the grid fins, the effective parameters of the grid fin configurations according to the speed regime will be investigated.

• Wind and Structures
• /
• 제6권3호
• /
• pp.221-248
• /
• 2003

The design of high-rise building is often influenced by wind-induced motions such as accelerations and lateral deflections. Consequently, the building's structural stiffness and dynamic (vibration periods and damping) properties become important parameters in the determination of such motions. The approximate methods and empirical expressions used to quantify these parameters at the design phase tend to yield values significantly different from each other. In view of this, there is a need to examine how actual buildings in the field respond to dynamic wind loading in order to ascertain a more realistic model for the dynamic behavior of buildings. This paper describes the findings from full-scale measurements of the wind-induced response of typical high-rise buildings in Singapore, and recommends an empirical forecast model for periods of vibration of typical buildings in Singapore, an appropriate computer model for determining the periods of vibration, and appropriate expressions which relate the wind speed to accelerations in buildings based on wind tunnel force balance model test and field results.

• 한국추진공학회:학술대회논문집
• /
• 한국추진공학회 2010년도 제35회 추계학술대회논문집
• /
• pp.717-722
• /
• 2010

초음속 풍동은 실험하고자 하는 모델 주위에 인공적으로 초음속 유동장을 형성하여 모델에 작용하는 현상을 관찰 및 측정하는 실험 장비이다. 이러한 풍동 실험 장비는 비행체 설계에 있어 시제기를 제작하지 않고도 비행체 외형에 대한 공기역학적 특성을 파악하는데 유용하다. 본 연구에서는 러시아에서 제작된 초음속/극초음속 풍동(MAF : The Model Aerodynamic Facility)을 시험 시간 증가 및 활용성 증가를 목적으로 개조하였다. 안전성 확보 및 원격 작동을 위해 공압 밸브를 설치, 실험 시간의 증가를 위해 새 저장 탱크를 설치했다. 설치한 밸브와 탱크를 이용할 수 있도록 배관 시스템을 개조하였다. 또한 광학적 시험을 위하여 시험부의 광학창을 확장하였다. 개조 후 마하수 2,3,4에 대하여 성능 시험을 수행하였다. 유동가시화 기법중 하나인 Shadow graph 기법을 이용하여 초음속 유동장의 형성을 확인하였으며, 마하수 2,3,4에 대하여 Settling Chamber, Working section의 압력측정을 통해 성능 시험을 수행하였다. 결과로부터 해당 초음속 풍동에 사용가능한 모델 크기 및 시험 시간을 도출하였다.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2002년도 학술대회지
• /
• pp.431-434
• /
• 2002

The excessive wind-induced motion of tall buildings most frequently result from vortex shedding induced across-wind oscillations. This form of excitation is most pronounced far relatively flexible, lightweight and lightly damped structure, e.g. tall building. This paper discusses aerodynamic means for mitigating the across-wind vortex shedding induced in such situations. Emphasis is on the change of the building cross section to design the building with openings from side to side which provide pressure equalization and tend to reduced the effectiveness of across-wind forces by reducing their magnitudes and disrupting their spatial correlation. Wind tunnel test have been carried out on the Kumoh National University of Technology using rigid models with twenty-four kinds of opening shapes. Form these results, the effective opening shape, size and location for building to reducing wind-induced vortex shedding and responses are pointed out.

• Wind and Structures
• /
• 제6권5호
• /
• pp.357-386
• /
• 2003

A number of methods based on various ideas have been proposed for simulating the non-Gaussian stationary process. However, these methods have some limitations. This paper reviewed several simulation methods based on the translation method using logarithmic and polynomial functions, which have emerged in the history of statistics and in the field of civil engineering. The applicability of each method is discussed from the viewpoint of the reproducibility of higher order statistics of the object function in the simulated sample functions, and examined using pressure signals measured from wind tunnel experiments for various shapes of buildings. The parameter estimation methods, i.e. the method of moments and quantile plot, are also reviewed, and the useful aspects of each method are discussed. Additionally, a simple worksheet for parameter estimation is derived based on the method of moment for practical application, and the accuracy is discussed comparing with a set of previously proposed formulae.