• 동력기계공학회지
• /
• 제10권4호
• /
• pp.17-24
• /
• 2006

The turbulent flow field characteristics of a gun-type gas burner with and without a duct were investigated under the isothermal condition of non-combustion. Vectors and mean velocities were measured by hot-wire anemometer system with an X-type hot-wire probe in this paper. The turbulent flow field with a duct seems to cause a counter-clockwise recirculation flow from downstream to upstream due to the unbalance of static pressure between a main jet flow and a duct wall. Moreover, the recirculation flow seems to expand the main jet flow to the radial and to shorten it to the axial. Therefore, the turbulent flow field with a duct increases a radial momentum but decreases a axial momentum. As a result, an axial mean velocity component with a duct above the downstream range of about X/R=1.5 forms a smaller magnitude than that without a duct in the inner part of a burner, but it shows the opposite trend in the outer part.

• 한국소음진동공학회논문집
• /
• 제15권11호
• /
• pp.1232-1240
• /
• 2005

The purpose of this paper is that investigates the dynamic behavior characteristic of W.T.S (wind turbine system) and carries out the evaluation analysis during operating W.T.S. To investigate the dynamic behavior characteristic of W.T.S, the experiments to measure vibration of the blade from the attached accelerometer on the flap and edge section of the blade that is one of the most important elements of dynamic characteristic of W.T.S are performed. Natural frequency and mode shape are calculated with commercial program ( ANSYS) using the measured vibration acceleration that receives the signal with F.F.T Analyzer from the accelerometer For validation of these experiments, the finite element analysis is performed with commercial F.E.M program (ANSYS) on the basis of the natural frequency and mode shape. The results indicate that experimental values have good agreements with the finite element analysis.

• Steel and Composite Structures
• /
• 제19권2호
• /
• pp.263-275
• /
• 2015

This study presents conceptual information of newly optimized shapes and connectivity of the so-called outrigger truss system for modern tall buildings that resists lateral loads induced by wind and earthquake forces. In practice, the outrigger truss consists of triangular or Vierendeel types to stiffen tall buildings, and the decision of outrigger design has been qualitatively achieved by only engineers' experience and intuition, including information of structural behaviors, although outrigger shapes and the member's connectivity absolutely affect building stiffness, the input of material, construction ability and so on. Therefore the design of outrigger trusses needs to be measured and determined according to scientific proofs like reliable optimal design tools. In this study, at first the shape and connectivity of an outrigger truss system are visually evaluated by using a conceptual design tool of the classical topology optimization method, and then are quantitatively investigated with respect to a structural safety as stiffness, an economical aspect as material quantity, and construction characteristics as the number of member connection. Numerical applications are studied to verify the effectiveness of the proposed design process to generate a new shape and connectivity of the outrigger for both static and dynamic responses.

• 전기전자학회논문지
• /
• 제23권1호
• /
• pp.151-158
• /
• 2019

본 논문에서는 태양광 및 풍력 발전소 등에 설치되어 있는 다수의 계통 연계형 인버터를 사용하여 Virtual D-STATCOM을 구성하고, 배전계통의 부하의 무효전력과 배전선로의 거리에 따른 케이블의 무효전력을 보상하여 기존의 단일 대용량 D-STATCOM을 설치하지 않고 변전소 인근의 PCC단의 무효전력을 보상하는 방법을 제시한다. 제안된 방식은 Matlab Simulink 시뮬레이션을 통해 동작원리와 무효전력 보상 성능을 검증하였다.

• Earthquakes and Structures
• /
• 제20권2호
• /
• pp.161-173
• /
• 2021

The structural behavior of a tensile fabric structure, known as hypar, is investigated. Seismic-induced stresses in the fabric and axial forces in masts and cables are obtained using accelerograms recorded at different regions of the world. Time-history analysis using each recording are performed for the hypar by using finite element simulation. It is found that while the seismic stresses in the fabric are not critical for design, the seismic tensile forces in cables and the seismic compressive forces in masts should not be disregarded by designers. This is important, because the seismic design is usually not considered so relevant, as compared for instance with wind design, for these types ofstructures. The most relevant findings of this study are: 1) dynamic axial forces can have an increase of up to twice the static loading when the TFS is subjected to seismic demands, 2) large peak ground accelerations seem to be the key parameter for significant seismic-induced axial forces, but not clear trend is found to relate such forces with earthquakes and site characteristics and, 3) the inclusion or exclusion of the form-finding in the analysis procedure importantly affects results ofseismic stresses in the fabric, but not in the frame.

• 한국지반공학회논문집
• /
• 제35권11호
• /
• pp.97-110
• /
• 2019

해상풍력 구조물을 지지하는 말뚝기초는 바람, 파랑, 조류 등에 의한 횡방향 반복하중을 지배적으로 받는다. 해상풍력 구조물의 안정적인 성능확보를 위해서 횡방향 반복하중을 받는 말뚝기초의 지지거동을 적절히 평가해 설계에 적용할 필요가 있으며, 말뚝 및 지반을 각각 탄성빔과 비선형 스프링으로 가정하는 p-y 곡선방법이 가장 널리 활용되고 있다. 본 연구에서는 조밀한 포화 실트질 모래지반에 설치되어 횡방향 반복하중을 받는 말뚝기초의 p-y 거동을 평가하기 위해서, 1g 모형말뚝시험을 수행했다. 모형시험 결과, 말뚝에 횡방향 반복하중 재하 시 p-y 곡선의 강성(초기기울기 및 최대지반반력)이 점차 감소했다. p-y 곡선의 강성감소는 반복하중의 크기가 크고 지표면에 가까운 위치에서 더 명확하게 나타났는데, 상기조건에서 말뚝 주변지반의 교란효과가 크게 발생해 지반의 지지능력이 더욱 크게 감소했기 때문이다. 모형시험 결과를 활용해 조밀한 포화 실트질 모래지반에 설치되어 횡방향 반복하중을 받는 말뚝기초의 p-y 곡선을 제안했다. 등가정적해석을 통해 예측된 말뚝거동을 모형시험결과와 비교한 결과, 제안된 식을 통해 비교적 조밀하고 포화된 실트질 모래지반에서 반복하중을 받는 말뚝의 횡방향 지지거동을 적절히 평가할 수 있음을 확인했다.

• 한국해양환경ㆍ에너지학회지
• /
• 제19권1호
• /
• pp.7-17
• /
• 2016

본 연구에서는 대형 부유식 파력-해상풍력 복합발전 구조물의 극한환경 운동 성능에 관한 실험적 연구를 다루고 있다. 대형 부유식 복합발전 구조물에 대한 운동 성능을 평가하기 위하여 1/50 축척비의 모형을 제작하였다. 그리고 설계된 계류선의 사양에 부합하는 계류선 모형을 제작하였고 자유감쇠시험 및 static pull-out 시험을 통하여 검증하였다. 주어진 구조물의 수심을 만족하기 위하여 계류선 테이블을 도입하고 환경조건에 계류판에 따른 환경조건을 확인하였다. 모형시험에서 규칙파 중 운동응답을 확인하고 파랑, 조류, 바람의 복합환경 하중을 적용하여 극한환경 운동성능을 해석하였다. 최대 운동 및, 가속도를 계측하여 운동 안전성을 판단하였고 최대 변위와 계류 하중도 선급기준에 따라 판단하였다. 이로부터 복합발전 구조물의 운동 특성에 대하여 토의하였다.

• 대기
• /
• 제19권1호
• /
• pp.9-36
• /
• 2009

Two heavy snowfall events occurred in Yeongnam and Yeongdong regions of the Korean Peninsula during the period from 4 to 6 March 2005 are analyzed. The events were developed by two different meso-scale snow clouds associated with an extratropical low passing over the Western Pacific. Based on synoptic data, GOES-9 satellite images, and precipitation amount data, the events were named as Sokcho and Busan cases, respectively. We analyzed the development mechanism of the events using meterological variables from the NCEP(National Centers for Environmental Prediction) /NCAR(National Centers for Atmospheric Research) reanalysis data such as potential vorticity(PV), divergence, tropopause undulation, static stability, and meridional wind circulation. The present analyses show that in the case of Sokcho, the cyclonic circulation in the lower atmosphere in the strong baroclinic region induced the cyclonic circulation in the upper atmosphere. The cyclonic circulation in the lower and upper atmosphere caused a heavy snowfall in the Sokcho region. In the case of Busan, the strong cyclonic circulation in the upper atmosphere was initiated by the stratospheric air intrusion with the high positive PV into the troposphere during the tropopause folding. The upper strong cyclonic circulation enhanced the cyclonic circulation in the lower disturbed atmosphere due to the extratropical low. This lower cyclonic circulation in turn, intensified the upper cyclonic circulation, that caused a heavy snowfall in the Busan region.

• 한국전산구조공학회:학술대회논문집
• /
• 한국전산구조공학회 2005년도 춘계 학술발표회 논문집
• /
• pp.55-62
• /
• 2005

In this paper, a CAB/CAE integrated optimal design system is developed, in which design and analysis process is automated using CAD/CAE softwares, for a complicated model for which parametric modeling provided by CAD software is not possible. CAD modeling process is automated by using UG/OPEN API function and UG/Knowledge Fusion provided by Unigraphics. The generated model is transferred to the analysis code ANSYS in parasolid format. Visual DOC software is used for optimization. The system is developed for PLS(Plasma Lighting System), which is a next generation illumination system that is used to illuminate stadium or outdoor advertizing panel. The PLS system consists of more then 20 components, which requires a lot of human efforts in modeling and analysis. The analysis for PLS includes static load, wind load and impact load analysis. As a result of analysis, it is found that the most critical component is a tilt assembly, which links lower & upper body assembly. For more reliable analysis, experiment is conducted using MTS and compared with the Finite element analysis result. The objective in the optimization is to minimize the material volume under allowable stresses. The design variables are three parameters in the tilt assembly that are chosen to be the most sensitive in stress values of twelve parameters. Gradient based method and RSM(Response Surface Method) are used for the algorithm and the results are compared. As a result of optimization, the maximum stress is reduced by 57%.

• Wind and Structures
• /
• 제27권4호
• /
• pp.269-282
• /
• 2018

In this paper, a new displacement field based on quasi-3D hybrid-type higher order shear deformation theory is developed to analyze the static and dynamic response of exponential (E), power-law (P) and sigmoïd (S) functionally graded beams. Novelty of this theory is that involve just three unknowns with including stretching effect, as opposed to four or even greater numbers in other shear and normal deformation theories. It also accounts for a parabolic distribution of the transverse shear stresses across the thickness, and satisfies the zero traction boundary conditions at beams surfaces without introducing a shear correction factor. The beam governing equations and boundary conditions are determined by employing the Hamilton's principle. Navier-type analytical solutions of bending and free vibration analysis are provided for simply supported beams subjected to uniform distribution loads. The effect of the sigmoid, exponent and power-law volume fraction, the thickness stretching and the material length scale parameter on the deflection, stresses and natural frequencies are discussed in tabular and graphical forms. The obtained results are compared with previously published results to verify the performance of this theory. It was clearly shown that this theory is not only accurate and efficient but almost comparable to other higher order shear deformation theories that contain more number of unknowns.