• Wind and Structures
• /
• 제36권4호
• /
• pp.263-275
• /
• 2023

As a new kind of construction facility for high rise buildings, the integral steel platform scaffold system (ISPS) consisting of the steel skeleton and suspended scaffold faces high wind during the construction procedure. The lattice structure type and existence of core tubes both make it difficult to estimate the wind load and calculate the wind-induced responses. In this study, an aeroelastic model with a geometry scale ratio of 1:25 based on the ISPS for Shanghai Tower, with the representative square profile, is manufactured and then tested in a wind tunnel. The first mode of the prototype ISPS is a torsional one with a frequency of only 0.68 Hz, and the model survives under extreme wind speed up to 50 m/s. The static wind load and wind vibration factors are derived based on the test result and supplementary finite element analysis, offering a reference for the following ISPS design. The spacer at the bottom of the suspended scaffold is suggested to be long enough to touch the core tube in the initial status to prevent the collision. Besides, aerodynamic wind loads and cross-wind loads are suggested to be included in the structural design of the ISPS.

• Wind and Structures
• /
• 제27권2호
• /
• pp.89-100
• /
• 2018

3D simulations based on an impinging jet were carried out to investigate the flow field of a steady downburst and its effects on a high-rise building by applying the SST k-${\omega}$ turbulence model. The vertical profile of radial wind speed obtained from the simulation was compared with experimental data and empirical models in order to validate the accuracy of the present numerical method. Then wind profiles and the influence of jet velocity and jet height were investigated. Focusing on a high-rise building, the flow structures around the building, pressure distributions on the building surfaces and aerodynamic forces were analyzed in order to enhance the understanding of wind load characteristics on a high-rise building immersed in a downburst.

• 생물환경조절학회지
• /
• 제24권3호
• /
• pp.135-146
• /
• 2015

본 연구는 온실에 작용하는 풍하중 산정을 위한 설계 풍속을 결정하는데 필요한 자료를 제공하기 위하여 10m 이하 높이에서의 풍속을 측정하여 풍속고도분포지수를 산정하고 변화를 분석하였다. 고도에 따른 풍속분포함수를 결정하기 위한 풍속고도분포지수를 계산하기 위해서는 $5m{\cdot}s^{-1}$ 이상의 풍속을 사용하는 것이 타당하다고 판단된다. 농촌 개활지인 부안지역의 고도에 따른 풍속변화는 지표면으로부터 풍속이 지수함수로 증가하는 우리나라의 RDC 기준과 일본의 JGHA 기준과 잘 일치하였고 풍속고도분포지수도 0.26으로 기준들에서 제시된 0.25와 거의 동일한 값을 나타내었다. 반면 군위지역의 경우는 풍속고도분포지수가 0.06으로 산정되어 지표면조도가 클수록 풍속고도분포지수가 증가하는 일반적인 변화 경향과는 반대로 나타났다. 이는 타워가 주변지대보다 약 2m 가량 더 높은 위치에 설치되었기 때문에 유선의 급격한 변화에 의한 것으로 판단된다. 따라서 일반적으로 농촌 개활지에 설치되는 온실의 설계를 위해 적용할 풍속고도분포로는 우리나라의 RDC기준과 일본의 JGHA기준에서 제시한 풍속고도분포가 가장 타당한 것으로 사료된다. 부안의 경우 오전 7시 경부터 풍속고도 분포지수가 감소하다가 오후 3시경에 최소가 된 후 다시 증가하여 24시경에 일정해지는 것으로 나타나 시간에 따른 풍속고도분포지수의 일반적인 변화경향과 잘 일치하였다. 부안지역은 형상변수가 1.51로 나타나 간척지인 부안지역의 풍속특성이 제주도 연안지역과 유사한 풍속특성을 가지고 있음을 확인하였다.

• 한국음향학회:학술대회논문집
• /
• 한국음향학회 1994년도 FIFTH WESTERN PACIFIC REGIONAL ACOUSTICS CONFERENCE SEOUL KOREA
• /
• pp.710-715
• /
• 1994

The program name TOLAPS is an acronym for Take-Off LAnding Profile Simulation. Some of the interesting features of this program is the ability to detect flight performance effects of airport altitude, ambient temperature, air pressure and wind. TOLAPS can also handle effects of TOW and LW. The program user can also calculate profiles by user difined flaps and thrust settings deviating from recommended standard settings for each aircraft. Wind effects on straight out flying as well as turns can also be demonstrated. Output form TOLAPS are either screen graphics of profiles (altitude, speed or thrust versus flight distance) or flight track. Profiles can also be made in a tabular form, ready for use in most airport noise calculation programs. In this way, TOLAPS is a valuable tool to evaluate effects of noise abatement procedures.

• 한국환경과학회지
• /
• 제17권6호
• /
• pp.591-599
• /
• 2008

In order to support the development of wind farms in Jejudo, a wind resource database for Jejudo has been established using a meteor-statistical analysis of KIER(Korea Institute of Energy Research) met-mast measurements and KMA(Korea Meteorological Administration) weather data. The analysis included wind statistics, tower shading, an exposure category classification using satellite images, the effect of atmospheric stability on the wind profile exponent, and a correlation matrix of wind speed to gain an understanding of the meteorological correlation between long-term weather observation stations and short-term met-mast measurements. The wind resource database for Jejudo, is to be provided as an add-on to Google $Earth^{TM}$, which is expected to be utilized as a guideline for the selection of an appropriate reference site for long-term correction in the next wind farm development project.

• 한국항공우주학회지
• /
• 제50권12호
• /
• pp.899-907
• /
• 2022

초경량 비행장치인 드론의 최대 허용 비행 고도는 지상 150m로 이는 난류의 영향을 받아 바람의 변동성이 강한 대기경계층 내에 존재한다. 또한 대기경계층 내에서의 바람 변동성은 지리적 위치에 따라 다른 특성을 가지므로 드론 관련 안전사고 방지를 위해서는 비행 지역에서의 각 고도의 바람 특성에 대한 명확한 이해가 필요하다. 본 연구에서는 인천국제공항 인근에 위치한 항공기상관측장비 테스트베드에서 윈드라이다(WindMast 350M)를 사용하여 2022년 7월과 9월에 바람의 연직 구조 관측을 수행하였고, 이러한 관측된 바람 자료를 활용하여 드론의 안전비행을 위한 정보를 생산하는 분석 방안을 제시하였다. 우선 윈드라이다를 통해 수집된 바람 자료에 푸리에 변환 분석 방법을 사용하여 수평 풍속의 시간 규모 특징을 각 고도별로 살펴보았다. 또한 강수와 무강수 사례의 바람장의 스펙트럼으로부터 드론 비행에 중요한 바람의 시간 규모인 1시간 이하 규모의 수평 풍속의 분산을 분리하여 전체 규모에 대한 1시간 이하 규모의 기여도를 각 고도별로 확인하였다.

• 한국대기환경학회지
• /
• 제13권5호
• /
• pp.361-369
• /
• 1997

In order to investigate the abundance and transboundary fluxes of air pollutants over the Yellow Sea, airborne measurements were made aboard the SF-600 aircraft (Pan-Asia Engineering) in March, 1996. The data presented in this paper are preliminary results and airborne experiment will be carried out until 1999. The vertical profile of relevant meteorological parameters such as temperature, water vapor, wind direction and wind speed were also observed at Taean. Mixing layer height was about 1000~1100m during the flights. The SO$_2$ and NO$_{x}$ concentrations were 3~6 ppb and 5~7 ppb below 1000 m, within 1 ppb and 3~5 ppb at 1000~2000m, respectively. Backward trajectory analyses were also carried out. A mathematical method by Lelieveld et al.(1989) was used to estimate the flux of air pollutants through the planetary boundary layer of Yellow Sea area. Transboundary fluxes were calculated using the measurement results with respect to the pollutants concentration, depth of the planetary boundary layer, wind speed and wind direction. The estimated transboundary flux of SO$_2$through the western boundary of Korea was about 39~42 tons/hour.r.

• 대한기계학회논문집A
• /
• 제35권1호
• /
• pp.77-83
• /
• 2011

본 논문에서는 해상 부유식 풍력타워의 동역학 모델링이 제시되고, 다양한 해상환경하중인 풍하중, 파랑하중을 모델링하여 플랫폼의 동적 거동해석을 수행하였다. 풍하중을 모델링하기 위해 풍속은 높이에 따라 변하도록 고려하였고, 파랑하중은 상대운동 모리슨방정식을 이용하여 모델링 하였다. 동적 거동해석을 위해 동역학해석프로그램인 ADAMS 를 이용하였다. 부유식 플랫폼에 많이 쓰이는 tension leg platform 의 네 가지 타입에 대해 동적 거동특성을 비교하였다.

• 생물환경조절학회지
• /
• 제23권4호
• /
• pp.391-400
• /
• 2014

The number of large scale greenhouses has recently been increasing to cope with mass consumption of agricultural product. Korean government announced a new development plan for constructing greenhouse complex in reclaimed lands for the purpose of improvement in exports and activation of domestic market of agricultural product. Wind environment in the reclaimed land is totally different from that of inland area, and it can give a strong influence on ventilation performance of naturally ventilated greenhouse facilities. In this study, internal airflow analysis of naturally ventilated greenhouse built on a reclaimed land was conducted using wind tunnel and PIV for validation research. Later, the PIV measured results will be used to improve the accuracy of 3 dimensional CFD simulation in the future. Wind profile at a reclaimed land was produced using ESDU program and it was applied to the wind tunnel. The calculated error was only 5% and 0.96 of correlation coefficient, implying that the computed profiles were designed properly. From the measured results, when external wind speed changed from $1m{\cdot}s^{-1}$ to $1.5m{\cdot}s^{-1}$, air velocities inside the greenhouse which PIV measured were also increased proportionately in case of both side vent open and side-roof vent open. Considering reduced ratio of air velocity inside the greenhouse, it was measured a minimum of 40% in case of side vent and 30% in case of side-roof vent compared with external wind speed from each vent type. From the quantitative and qualitative PIV analysis, the PIV measured results indicated that there were well ventilated and stagnant areas in the greenhouse according to external wind condition as well as ventilation design.

• 설비공학논문집
• /
• 제17권11호
• /
• pp.1050-1059
• /
• 2005

Heat and $SF_6$ gas dispersions over a complex terrain were investigated using wind tunnel. The wind speed, temperature and concentration profiles were measured for the 1/1000 scale complicated terrain model in an Eiffel type boundary layer wind tunnel with test section of 2.5m in height and 4.5m in width. The scale model was mounted on the top of a plate which can rotate with respect to the approaching wind. Dispersion processes from a continuous emission source driven by various wind direction were investigated, including plume climbing over the steep up-slope of the mountain and down-spreading toward the lower level of the valley. Extensive dispersion experiment data (wind speeds and concentration profiles) were provided for verification and validation of dispersion models. Under the identical flow and emission conditions, the independently measured profiles of the temperature and $SF_6$ concentration showed an excellent agreement which ensured the credibility of the results.